On Mon, Nov 16, 2015 at 07:02:03PM +1100, Alexey Kardashevskiy wrote:
>On 11/05/2015 12:12 AM, Gavin Shan wrote:
>>This enables M64 window on P7IOC, which has been enabled on PHB3.
>>Different from PHB3 where 16 M64 BARs are supported and each of
>>them can be owned by one particular PE# exclusively or divided
>>evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each
>>of them are divided to 8 segments. So every P7IOC PHB supports
>>128 M64 segments in total. P7IOC has M64DT, which helps mapping
>>one particular M64 segment# to arbitrary PE#. PHB3 doesn't have
>>M64DT, indicating that one M64 segment can only be pinned to the
>>fixed PE#. In order to have same code to support M64 on P7IOC and
>>PHB3, we just provide 128 M64 segments on every P7IOC PHB and each
>>of them is pinned to the fixed PE# by bypassing the function of
>>M64DT. In turn, we just need different phb->init_m64() for P7IOC
>>and PHB3 to support M64.
>>
>>Signed-off-by: Gavin Shan <gws...@linux.vnet.ibm.com>
>>---
>> arch/powerpc/platforms/powernv/pci-ioda.c | 86
>> +++++++++++++++++++++++++++++--
>> arch/powerpc/platforms/powernv/pci.h | 3 ++
>> 2 files changed, 86 insertions(+), 3 deletions(-)
>>
>>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
>>b/arch/powerpc/platforms/powernv/pci-ioda.c
>>index 1f7d985..bfe69f1 100644
>>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>>@@ -256,6 +256,64 @@ static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev
>>*pdev,
>> }
>> }
>>
>>+static int pnv_ioda1_init_m64(struct pnv_phb *phb)
>>+{
>>+ struct resource *r;
>>+ int index;
>>+
>>+ /*
>>+ * There are 16 M64 BARs, each of which has 8 segments. So
>>+ * there are as many M64 segments as the maximum number of
>>+ * PEs, which is 128.
>>+ */
>>+ for (index = 0; index < PNV_IODA1_M64_NUM; index++) {
>>+ unsigned long base, segsz = phb->ioda.m64_segsize;
>>+ int64_t rc;
>>+
>>+ base = phb->ioda.m64_base +
>>+ index * PNV_IODA1_M64_SEGS * segsz;
>>+ rc = opal_pci_set_phb_mem_window(phb->opal_id,
>>+ OPAL_M64_WINDOW_TYPE, index, base, 0,
>>+ PNV_IODA1_M64_SEGS * segsz);
>>+ if (rc != OPAL_SUCCESS) {
>>+ pr_warn(" Error %lld setting M64 PHB#%d-BAR#%d\n",
>>+ rc, phb->hose->global_number, index);
>>+ goto fail;
>>+ }
>>+
>>+ rc = opal_pci_phb_mmio_enable(phb->opal_id,
>>+ OPAL_M64_WINDOW_TYPE, index,
>>+ OPAL_ENABLE_M64_SPLIT);
>>+ if (rc != OPAL_SUCCESS) {
>>+ pr_warn(" Error %lld enabling M64 PHB#%d-BAR#%d\n",
>>+ rc, phb->hose->global_number, index);
>>+ goto fail;
>>+ }
>>+ }
>>+
>>+ /*
>>+ * Exclude the segment used by the reserved PE, which
>>+ * is expected to be 0 or last supported PE#.
>>+ */
>>+ r = &phb->hose->mem_resources[1];
>
>
>What does "1" mean here? A bridge's 64bit prefetchable window?
>
It's PHB's M64 window.
>
>>+ if (phb->ioda.reserved_pe_idx == 0)
>>+ r->start += phb->ioda.m64_segsize;
>>+ else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
>>+ r->end -= phb->ioda.m64_segsize;
>>+ else
>>+ pr_warn(" Cannot cut M64 segment for reserved PE#%d\n",
>>+ phb->ioda.reserved_pe_idx);
>>+
Thanks,
Gavin
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
