These routines try to match the behavior of native 32-bit kernels
as closely as possible. They will replace architecture-specific
versions that are missing support for some fields and have various
bugs that cause behavior to diverge from that of a 32-bit kernel.
The only problematic situation is when sending a si_ptr from a
32-bit process to a 64-bit process or vice-versa, but this has
never worked correctly in the past anyways.
One thing to note is that, because the size of the siginfo_t union
differs between 32-bit and 64-bit systems, we need to stash the
last 4 bytes of the union in the 4 bytes of padding between the
64-bit union and the initial 3 siginfo_t members.
Signed-off-by: Amanieu d'Antras <aman...@gmail.com>
---
arch/arm64/include/asm/compat.h | 2 +
arch/mips/include/asm/compat.h | 2 +
arch/parisc/include/asm/compat.h | 2 +
arch/powerpc/include/asm/compat.h | 2 +
arch/s390/include/asm/compat.h | 2 +
arch/sparc/include/asm/compat.h | 2 +
arch/tile/include/asm/compat.h | 2 +
arch/x86/include/asm/compat.h | 2 +
include/uapi/asm-generic/siginfo.h | 1 +
kernel/compat.c | 224 +++++++++++++++++++++++++++++++++++++
kernel/signal.c | 12 +-
11 files changed, 248 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index ff4e294..5eae749 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -156,6 +156,8 @@ typedef union compat_sigval {
} compat_sigval_t;
#define HAVE_ARCH_COMPAT_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER32
+#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
typedef struct compat_siginfo {
int si_signo;
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 5f1f816..1e5ba38 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -131,6 +131,8 @@ typedef union compat_sigval {
} compat_sigval_t;
#define HAVE_ARCH_COMPAT_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER32
+#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
#define SI_PAD_SIZE32 (128/sizeof(int) - 3)
typedef struct compat_siginfo {
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index e0be05f..46a0a8a 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -135,6 +135,8 @@ typedef union compat_sigval {
} compat_sigval_t;
#define HAVE_ARCH_COMPAT_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER32
+#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
typedef struct compat_siginfo {
int si_signo;
diff --git a/arch/powerpc/include/asm/compat.h
b/arch/powerpc/include/asm/compat.h
index 75b25ff..cdc8638 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -125,6 +125,8 @@ typedef union compat_sigval {
} compat_sigval_t;
#define HAVE_ARCH_COMPAT_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER32
+#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
#define SI_PAD_SIZE32 (128/sizeof(int) - 3)
typedef struct compat_siginfo {
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index ac73ac7..497af62 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -193,6 +193,8 @@ typedef union compat_sigval {
} compat_sigval_t;
#define HAVE_ARCH_COMPAT_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER32
+#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
typedef struct compat_siginfo {
int si_signo;
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index 0c80f59..9357014 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -154,6 +154,8 @@ typedef union compat_sigval {
} compat_sigval_t;
#define HAVE_ARCH_COMPAT_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER32
+#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
#define SI_PAD_SIZE32 (128/sizeof(int) - 3)
typedef struct compat_siginfo {
diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h
index f9bba8d..e0c61da 100644
--- a/arch/tile/include/asm/compat.h
+++ b/arch/tile/include/asm/compat.h
@@ -116,6 +116,8 @@ typedef union compat_sigval {
} compat_sigval_t;
#define HAVE_ARCH_COMPAT_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER32
+#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
#define COMPAT_SI_PAD_SIZE (128/sizeof(int) - 3)
typedef struct compat_siginfo {
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 69176b4..c6b58b1 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -131,6 +131,8 @@ typedef union compat_sigval {
} compat_sigval_t;
#define HAVE_ARCH_COMPAT_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER32
+#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
typedef struct compat_siginfo {
int si_signo;
diff --git a/include/uapi/asm-generic/siginfo.h
b/include/uapi/asm-generic/siginfo.h
index 1e35520..cc8d95e 100644
--- a/include/uapi/asm-generic/siginfo.h
+++ b/include/uapi/asm-generic/siginfo.h
@@ -49,6 +49,7 @@ typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
+ int _pad2[__ARCH_SI_PREAMBLE_SIZE / sizeof(int) - 3];
union {
int _pad[SI_PAD_SIZE];
diff --git a/kernel/compat.c b/kernel/compat.c
index 333d364..644da25 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -1174,3 +1174,227 @@ void __user *compat_alloc_user_space(unsigned long len)
return ptr;
}
EXPORT_SYMBOL_GPL(compat_alloc_user_space);
+
+#ifndef HAVE_ARCH_COPY_SIGINFO_TO_USER32
+int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
+{
+ int err, si_code;
+
+ if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
+ return -EFAULT;
+
+ /*
+ * Get the user-visible si_code by hiding the top 16 bits if this is a
+ * kernel-generated signal.
+ */
+ si_code = from->si_code < 0 ? from->si_code : (short)from->si_code;
+
+ /*
+ * If you change siginfo_t structure, please be sure that
+ * all these functions are fixed accordingly:
+ * copy_siginfo_to_user
+ * copy_siginfo_to_user32
+ * copy_siginfo_from_user32
+ * signalfd_copyinfo
+ * They should never copy any pad contained in the structure
+ * to avoid security leaks, but must copy the generic
+ * 3 ints plus the relevant union member.
+ */
+ err = __put_user(from->si_signo, &to->si_signo);
+ err |= __put_user(from->si_errno, &to->si_errno);
+ err |= __put_user(si_code, &to->si_code);
+ if (from->si_code < 0) {
+ /*
+ * Copy the tail bytes of the union from the padding, see the
+ * comment in copy_siginfo_from_user32. Note that this padding
+ * is always initialized when si_code < 0.
+ */
+ BUILD_BUG_ON(sizeof(to->_sifields._pad) !=
+ sizeof(from->_sifields._pad) + sizeof(from->_pad2));
+ err |= __copy_to_user(to->_sifields._pad, from->_sifields._pad,
+ sizeof(from->_sifields._pad)) ? -EFAULT : 0;
+ err |= __copy_to_user(to->_sifields._pad + SI_PAD_SIZE,
+ from->_pad2, sizeof(from->_pad2)) ? -EFAULT : 0;
+ return err;
+ }
+ switch (from->si_code & __SI_MASK) {
+ case __SI_KILL:
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ break;
+ case __SI_TIMER:
+ err |= __put_user(from->si_tid, &to->si_tid);
+ err |= __put_user(from->si_overrun, &to->si_overrun);
+ /*
+ * Get the sigval from si_int, which matches the convention
+ * used in get_compat_sigevent.
+ */
+ err |= __put_user(from->si_int, &to->si_int);
+ break;
+ case __SI_POLL:
+ err |= __put_user(from->si_band, &to->si_band);
+ err |= __put_user(from->si_fd, &to->si_fd);
+ break;
+ case __SI_FAULT:
+ err |= __put_user(ptr_to_compat(from->si_addr), &to->si_addr);
+#ifdef __ARCH_SI_TRAPNO
+ err |= __put_user(from->si_trapno, &to->si_trapno);
+#endif
+#ifdef BUS_MCEERR_AO
+ /*
+ * Other callers might not initialize the si_lsb field,
+ * so check explicitly for the right codes here.
+ */
+ if (from->si_signo == SIGBUS &&
+ (from->si_code == BUS_MCEERR_AR ||
+ from->si_code == BUS_MCEERR_AO))
+ err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
+#endif
+#ifdef SEGV_BNDERR
+ if (from->si_signo == SIGSEGV && from->si_code == SEGV_BNDERR) {
+ err |= __put_user(ptr_to_compat(from->si_lower),
+ &to->si_lower);
+ err |= __put_user(ptr_to_compat(from->si_upper),
+ &to->si_upper);
+ }
+#endif
+ break;
+ case __SI_CHLD:
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ err |= __put_user(from->si_status, &to->si_status);
+ err |= __put_user(from->si_utime, &to->si_utime);
+ err |= __put_user(from->si_stime, &to->si_stime);
+ break;
+ case __SI_RT: /* This is not generated by the kernel as of now. */
+ case __SI_MESGQ: /* But this is */
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ /*
+ * Get the sigval from si_int, which matches the convention
+ * used in get_compat_sigevent.
+ */
+ err |= __put_user(from->si_int, &to->si_int);
+ break;
+#ifdef __ARCH_SIGSYS
+ case __SI_SYS:
+ err |= __put_user(ptr_to_compat(from->si_call_addr),
+ &to->si_call_addr);
+ err |= __put_user(from->si_syscall, &to->si_syscall);
+ err |= __put_user(from->si_arch, &to->si_arch);
+ break;
+#endif
+ default: /* this is just in case for now ... */
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ break;
+ }
+ return err;
+}
+#endif
+
+#ifndef HAVE_ARCH_COPY_SIGINFO_FROM_USER32
+int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
+{
+ int err;
+ compat_uptr_t ptr32;
+
+ if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
+ return -EFAULT;
+
+ /*
+ * If you change siginfo_t structure, please be sure that
+ * all these functions are fixed accordingly:
+ * copy_siginfo_to_user
+ * copy_siginfo_to_user32
+ * copy_siginfo_from_user32
+ * signalfd_copyinfo
+ * They should never copy any pad contained in the structure
+ * to avoid security leaks, but must copy the generic
+ * 3 ints plus the relevant union member.
+ */
+ err = __get_user(to->si_signo, &from->si_signo);
+ err |= __get_user(to->si_errno, &from->si_errno);
+ err |= __get_user(to->si_code, &from->si_code);
+ if (to->si_code < 0) {
+ /*
+ * Note that the compat union may be larger than the normal one
+ * due to alignment. We work around this by copying any data
+ * that doesn't fit in the normal union into the padding before
+ * the union.
+ */
+ BUILD_BUG_ON(sizeof(to->_sifields._pad) + sizeof(to->_pad2) !=
+ sizeof(from->_sifields._pad));
+ err |= __copy_from_user(to->_sifields._pad,
+ from->_sifields._pad,
+ sizeof(to->_sifields._pad)) ? -EFAULT : 0;
+ err |= __copy_from_user(to->_pad2,
+ from->_sifields._pad + SI_PAD_SIZE, sizeof(to->_pad2))
+ ? -EFAULT : 0;
+ return err;
+ }
+ switch (to->si_code & __SI_MASK) {
+ case __SI_KILL:
+ err |= __get_user(to->si_pid, &from->si_pid);
+ err |= __get_user(to->si_uid, &from->si_uid);
+ break;
+ case __SI_TIMER:
+ err |= __get_user(to->si_tid, &from->si_tid);
+ err |= __get_user(to->si_overrun, &from->si_overrun);
+ /*
+ * Put the sigval in si_int, which matches the convention
+ * used in get_compat_sigevent.
+ */
+ to->si_ptr = NULL; /* Avoid uninitialized bits in the union */
+ err |= __get_user(to->si_int, &from->si_int);
+ break;
+ case __SI_POLL:
+ err |= __get_user(to->si_band, &from->si_band);
+ err |= __get_user(to->si_fd, &from->si_fd);
+ break;
+ case __SI_FAULT:
+ err |= __get_user(ptr32, &from->si_addr);
+ to->si_addr = compat_ptr(ptr32);
+#ifdef __ARCH_SI_TRAPNO
+ err |= __get_user(to->si_trapno, &from->si_trapno);
+#endif
+ err |= __get_user(to->si_addr_lsb, &from->si_addr_lsb);
+ err |= __get_user(ptr32, &from->si_lower);
+ to->si_lower = compat_ptr(ptr32);
+ err |= __get_user(ptr32, &from->si_upper);
+ to->si_upper = compat_ptr(ptr32);
+ break;
+ case __SI_CHLD:
+ err |= __get_user(to->si_pid, &from->si_pid);
+ err |= __get_user(to->si_uid, &from->si_uid);
+ err |= __get_user(to->si_status, &from->si_status);
+ err |= __get_user(to->si_utime, &from->si_utime);
+ err |= __get_user(to->si_stime, &from->si_stime);
+ break;
+ case __SI_RT: /* This is not generated by the kernel as of now. */
+ case __SI_MESGQ: /* But this is */
+ err |= __get_user(to->si_pid, &from->si_pid);
+ err |= __get_user(to->si_uid, &from->si_uid);
+ /*
+ * Put the sigval in si_int, which matches the convention
+ * used in get_compat_sigevent.
+ */
+ to->si_ptr = NULL; /* Avoid uninitialized bits in the union */
+ err |= __get_user(to->si_int, &from->si_int);
+ break;
+#ifdef __ARCH_SIGSYS
+ case __SI_SYS:
+ err |= __get_user(ptr32, &from->si_call_addr);
+ to->si_call_addr = compat_ptr(ptr32);
+ err |= __get_user(to->si_syscall, &from->si_syscall);
+ err |= __get_user(to->si_arch, &from->si_arch);
+ break;
+#endif
+ default: /* this is just in case for now ... */
+ err |= __get_user(to->si_pid, &from->si_pid);
+ err |= __get_user(to->si_uid, &from->si_uid);
+ break;
+ }
+ return err;
+}
+#endif
diff --git a/kernel/signal.c b/kernel/signal.c
index 0f6bbbe..873e8e2 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2713,11 +2713,13 @@ int copy_siginfo_to_user(siginfo_t __user *to, const
siginfo_t *from)
return __copy_to_user(to, from, sizeof(siginfo_t))
? -EFAULT : 0;
/*
- * If you change siginfo_t structure, please be sure
- * this code is fixed accordingly.
- * Please remember to update the signalfd_copyinfo() function
- * inside fs/signalfd.c too, in case siginfo_t changes.
- * It should never copy any pad contained in the structure
+ * If you change siginfo_t structure, please be sure that
+ * all these functions are fixed accordingly:
+ * copy_siginfo_to_user
+ * copy_siginfo_to_user32
+ * copy_siginfo_from_user32
+ * signalfd_copyinfo
+ * They should never copy any pad contained in the structure
* to avoid security leaks, but must copy the generic
* 3 ints plus the relevant union member.
*/
--
2.6.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
