Hi Igal, [auto build test ERROR on net/master -- if it's inappropriate base, please suggest rules for selecting the more suitable base]
url: https://github.com/0day-ci/linux/commits/igal-liberman-freescale-com/Freescale-DPAA-FMan/20151028-205843 config: arm-allmodconfig (attached as .config) reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross ARCH=arm All errors (new ones prefixed by >>): drivers/net/ethernet/freescale/fman/fman_dtsec.c: In function 'dtsec_isr': >> drivers/net/ethernet/freescale/fman/fman_dtsec.c:872:4: error: implicit >> declaration of function 'in_be32' [-Werror=implicit-function-declaration] tpkt1 = in_be32(®s->tpkt); ^ >> drivers/net/ethernet/freescale/fman/fman_dtsec.c:913:5: error: implicit >> declaration of function 'out_be32' [-Werror=implicit-function-declaration] out_be32(®s->rctrl, ^ cc1: some warnings being treated as errors -- drivers/net/ethernet/freescale/fman/fman_memac.c: In function 'memac_init': >> drivers/net/ethernet/freescale/fman/fman_memac.c:1189:3: error: implicit >> declaration of function 'in_be32' [-Werror=implicit-function-declaration] reg32 = in_be32(&memac->regs->command_config); ^ >> drivers/net/ethernet/freescale/fman/fman_memac.c:1191:3: error: implicit >> declaration of function 'out_be32' [-Werror=implicit-function-declaration] out_be32(&memac->regs->command_config, reg32); ^ cc1: some warnings being treated as errors vim +/in_be32 +872 drivers/net/ethernet/freescale/fman/fman_dtsec.c 866 if (dtsec->fm_rev_info.major == 2) { 867 u32 tpkt1, tmp_reg1, tpkt2, tmp_reg2, i; 868 /* a. Write 0x00E0_0C00 to DTSEC_ID 869 * This is a read only register 870 * b. Read and save the value of TPKT 871 */ > 872 tpkt1 = in_be32(®s->tpkt); 873 874 /* c. Read the register at dTSEC address offset 0x32C */ 875 tmp_reg1 = in_be32(®s->reserved02c0[27]); 876 877 /* d. Compare bits [9:15] to bits [25:31] of the 878 * register at address offset 0x32C. 879 */ 880 if ((tmp_reg1 & 0x007F0000) != 881 (tmp_reg1 & 0x0000007F)) { 882 /* If they are not equal, save the value of 883 * this register and wait for at least 884 * MAXFRM*16 ns 885 */ 886 usleep_range((u32)(min 887 (dtsec_get_max_frame_length(dtsec) * 888 16 / 1000, 1)), (u32) 889 (min(dtsec_get_max_frame_length 890 (dtsec) * 16 / 1000, 1) + 1)); 891 } 892 893 /* e. Read and save TPKT again and read the register 894 * at dTSEC address offset 0x32C again 895 */ 896 tpkt2 = in_be32(®s->tpkt); 897 tmp_reg2 = in_be32(®s->reserved02c0[27]); 898 899 /* f. Compare the value of TPKT saved in step b to 900 * value read in step e. Also compare bits [9:15] of 901 * the register at offset 0x32C saved in step d to the 902 * value of bits [9:15] saved in step e. If the two 903 * registers values are unchanged, then the transmit 904 * portion of the dTSEC controller is locked up and 905 * the user should proceed to the recover sequence. 906 */ 907 if ((tpkt1 == tpkt2) && ((tmp_reg1 & 0x007F0000) == 908 (tmp_reg2 & 0x007F0000))) { 909 /* recover sequence */ 910 911 /* a.Write a 1 to RCTRL[GRS] */ 912 > 913 out_be32(®s->rctrl, 914 in_be32(®s->rctrl) | RCTRL_GRS); 915 916 /* b.Wait until IEVENT[GRSC]=1, or at least --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
.config.gz
Description: Binary data
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
