On Wed, Oct 07, 2015 at 05:00:49PM +1100, Michael Ellerman wrote: > > It's also worth noting that the __flush_power7 uses tlbiel instead of tlbie. > > Yeah that's a good point. It's not clear if the swsusp code wants to a local > or > a global invalidate.
If I read the code right, this is called on the boot CPU when all the non-boot CPUs are still (potentially) down, so if you would do a global invalidate the non-boot CPUs might not even notice, so those need to do a (local) invalidate after being brought up anyway? Or they probably need it before being brought down at all? You figure it out, it makes my brain hurt :-) > As an alternative, can you try adding a .machine push / .machine "power4" / > .machine pop, around the tlbie. That should tell the assembler to drop back to > power4 mode for that instruction, which should then do the right thing. There > are some examples in that file. That will get the assembler to not complain, but it will assemble the wrong instruction: the power7 instruction has the same opcode (but different semantics). So if you assemble a "tlbie r4" in power4 mode, a newer CPU will see it as a "tlbie r4,r0" and do the wrong thing. Segher _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
