Hi,
Has anybody already used 'perf' tool on powerpc MPC83xx ?
I have been succesfully using perf on MPC8xx, but on MPC83xx I get
something strange.
perf record/report reports addresses on user stack, as if it was mixing
up D accesses and I accesses.
Any idea of what the problem can be ?
# Samples: 8K of event 'cpu-clock'
# Event count (approx.): 2196000000
#
# Overhead Command Shared Object Symbol
# ........ ............ ..................
............................................
#
2.62% perf_reseau4 libpthread-2.18.so [.] __libc_send
2.56% perf_reseau4 [kernel.kallsyms] [k] __ip_make_skb
1.62% perf_reseau4 [kernel.kallsyms] [k] __ip_append_data.isra.39
1.55% perf_reseau4 [kernel.kallsyms] [k] ip_finish_output
1.33% perf_reseau4 [unknown] [k] 0x7ffffd94
1.33% perf_reseau4 [unknown] [k] 0x7ffffd95
1.28% perf_reseau4 [unknown] [k] 0x7ffffd97
1.26% perf_reseau4 [unknown] [k] 0x7ffffda3
1.24% perf_reseau4 [unknown] [k] 0x7ffffd98
1.22% perf_reseau4 [unknown] [k] 0x7ffffd92
1.22% perf_reseau4 [unknown] [k] 0x7ffffd9b
1.22% perf_reseau4 [unknown] [k] 0x7ffffdaa
1.21% perf_reseau4 [unknown] [k] 0x7ffffd96
1.18% perf_reseau4 [unknown] [k] 0x7ffffda7
1.17% perf_reseau4 [unknown] [k] 0x7ffffd8d
1.17% perf_reseau4 [unknown] [k] 0x7ffffd99
1.13% perf_reseau4 [unknown] [k] 0x7ffffd90
1.13% perf_reseau4 [unknown] [k] 0x7ffffda2
1.12% perf_reseau4 [kernel.kallsyms] [k] __local_bh_enable_ip
1.12% perf_reseau4 [unknown] [k] 0x7ffffd9c
1.12% perf_reseau4 [unknown] [k] 0x7ffffd9e
1.10% perf_reseau4 [unknown] [k] 0x7ffffda0
1.08% perf_reseau4 [unknown] [k] 0x7ffffd9f
1.08% perf_reseau4 [unknown] [k] 0x7ffffda6
1.05% perf_reseau4 [unknown] [k] 0x7ffffda8
1.02% perf_reseau4 [unknown] [k] 0x7ffffd9a
1.01% perf_reseau4 [unknown] [k] 0x7ffffdb0
1.00% perf_reseau4 [unknown] [k] 0x7ffffd89
1.00% perf_reseau4 [unknown] [k] 0x7ffffd8b
1.00% perf_reseau4 [unknown] [k] 0x7ffffdac
Christophe
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
