On Thu, Aug 06, 2015 at 03:36:01PM +1000, Gavin Shan wrote:
>On Wed, Aug 05, 2015 at 09:25:03AM +0800, Wei Yang wrote:
>>When M64 BAR is set to Single PE mode, the PE# assigned to VF could be
>>discrete.
>>
>>This patch restructures the patch to allocate discrete PE# for VFs when M64
>>BAR is set to Single PE mode.
>>
>>Signed-off-by: Wei Yang <weiy...@linux.vnet.ibm.com>
>>---
>> arch/powerpc/include/asm/pci-bridge.h     |    2 +-
>> arch/powerpc/platforms/powernv/pci-ioda.c |   69 
>> +++++++++++++++++++++--------
>> 2 files changed, 51 insertions(+), 20 deletions(-)
>>
>>diff --git a/arch/powerpc/include/asm/pci-bridge.h 
>>b/arch/powerpc/include/asm/pci-bridge.h
>>index 8aeba4c..72415c7 100644
>>--- a/arch/powerpc/include/asm/pci-bridge.h
>>+++ b/arch/powerpc/include/asm/pci-bridge.h
>>@@ -213,7 +213,7 @@ struct pci_dn {
>> #ifdef CONFIG_PCI_IOV
>>      u16     vfs_expanded;           /* number of VFs IOV BAR expanded */
>>      u16     num_vfs;                /* number of VFs enabled*/
>>-     int     offset;                 /* PE# for the first VF PE */
>>+     int     *offset;                /* PE# for the first VF PE or array */
>>      bool    m64_single_mode;        /* Use M64 BAR in Single Mode */
>> #define IODA_INVALID_M64        (-1)
>>      int     (*m64_map)[PCI_SRIOV_NUM_BARS];
>
>how about renaming "offset" to "pe_num_map", or "pe_map" ? Similar to the 
>comments
>I gave to the "m64_bar_map", num_of_max_vfs entries can be allocated. Though 
>not
>all of them will be used, not too much memory will be wasted.
>

Thanks for your comment.

I have thought about change the name to make it more self explain. While
another fact I want to take in is this field is also used to be reflect the
shift offset when M64 BAR is used in the Shared Mode. So I maintain the name.

How about use "enum", one maintain the name "offset", and another one rename to
"pe_num_map". And use the meaningful name at proper place?

>>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c 
>>b/arch/powerpc/platforms/powernv/pci-ioda.c
>>index 4042303..9953829 100644
>>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>>@@ -1243,7 +1243,7 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, 
>>u16 num_vfs)
>>
>>                      /* Map the M64 here */
>>                      if (pdn->m64_single_mode) {
>>-                             pe_num = pdn->offset + j;
>>+                             pe_num = pdn->offset[j];
>>                              rc = opal_pci_map_pe_mmio_window(phb->opal_id,
>>                                              pe_num, OPAL_M64_WINDOW_TYPE,
>>                                              pdn->m64_map[j][i], 0);
>>@@ -1347,7 +1347,7 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev)
>>      struct pnv_phb        *phb;
>>      struct pci_dn         *pdn;
>>      struct pci_sriov      *iov;
>>-     u16 num_vfs;
>>+     u16                    num_vfs, i;
>>
>>      bus = pdev->bus;
>>      hose = pci_bus_to_host(bus);
>>@@ -1361,14 +1361,18 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev)
>>
>>      if (phb->type == PNV_PHB_IODA2) {
>>              if (!pdn->m64_single_mode)
>>-                     pnv_pci_vf_resource_shift(pdev, -pdn->offset);
>>+                     pnv_pci_vf_resource_shift(pdev, -*pdn->offset);
>>
>>              /* Release M64 windows */
>>              pnv_pci_vf_release_m64(pdev, num_vfs);
>>
>>              /* Release PE numbers */
>>-             bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
>>-             pdn->offset = 0;
>>+             if (pdn->m64_single_mode) {
>>+                     for (i = 0; i < num_vfs; i++)
>>+                             pnv_ioda_free_pe(phb, pdn->offset[i]);
>>+             } else
>>+                     bitmap_clear(phb->ioda.pe_alloc, *pdn->offset, num_vfs);
>>+             kfree(pdn->offset);
>
>Can pnv_ioda_free_pe() be reused to release PE ?

You mean use it to similar thing in pnv_ioda_deconfigure_pe()?

>
>>      }
>> }
>>
>>@@ -1394,7 +1398,10 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, 
>>u16 num_vfs)
>>
>>      /* Reserve PE for each VF */
>>      for (vf_index = 0; vf_index < num_vfs; vf_index++) {
>>-             pe_num = pdn->offset + vf_index;
>>+             if (pdn->m64_single_mode)
>>+                     pe_num = pdn->offset[vf_index];
>>+             else
>>+                     pe_num = *pdn->offset + vf_index;
>>
>>              pe = &phb->ioda.pe_array[pe_num];
>>              pe->pe_number = pe_num;
>>@@ -1436,6 +1443,7 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 
>>num_vfs)
>>      struct pnv_phb        *phb;
>>      struct pci_dn         *pdn;
>>      int                    ret;
>>+     u16                    i;
>>
>>      bus = pdev->bus;
>>      hose = pci_bus_to_host(bus);
>>@@ -1462,19 +1470,38 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 
>>num_vfs)
>>              }
>>
>>              /* Calculate available PE for required VFs */
>>-             mutex_lock(&phb->ioda.pe_alloc_mutex);
>>-             pdn->offset = bitmap_find_next_zero_area(
>>-                     phb->ioda.pe_alloc, phb->ioda.total_pe,
>>-                     0, num_vfs, 0);
>>-             if (pdn->offset >= phb->ioda.total_pe) {
>>+             if (pdn->m64_single_mode) {
>>+                     pdn->offset = kmalloc(sizeof(*pdn->offset) * num_vfs,
>>+                                     GFP_KERNEL);
>>+                     if (!pdn->offset)
>>+                             return -ENOMEM;
>>+                     for (i = 0; i < num_vfs; i++)
>>+                             pdn->offset[i] = IODA_INVALID_PE;
>>+                     for (i = 0; i < num_vfs; i++) {
>>+                             pdn->offset[i] = pnv_ioda_alloc_pe(phb);
>>+                             if (pdn->offset[i] == IODA_INVALID_PE) {
>>+                                     ret = -EBUSY;
>>+                                     goto m64_failed;
>>+                             }
>>+                     }
>>+             } else {
>>+                     pdn->offset = kmalloc(sizeof(*pdn->offset), GFP_KERNEL);
>>+                     if (!pdn->offset)
>>+                             return -ENOMEM;
>>+                     mutex_lock(&phb->ioda.pe_alloc_mutex);
>>+                     *pdn->offset = bitmap_find_next_zero_area(
>>+                             phb->ioda.pe_alloc, phb->ioda.total_pe,
>>+                             0, num_vfs, 0);
>>+                     if (*pdn->offset >= phb->ioda.total_pe) {
>>+                             mutex_unlock(&phb->ioda.pe_alloc_mutex);
>>+                             dev_info(&pdev->dev, "Failed to enable VF%d\n", 
>>num_vfs);
>>+                             kfree(pdn->offset);
>>+                             return -EBUSY;
>>+                     }
>>+                     bitmap_set(phb->ioda.pe_alloc, *pdn->offset, num_vfs);
>>                      mutex_unlock(&phb->ioda.pe_alloc_mutex);
>>-                     dev_info(&pdev->dev, "Failed to enable VF%d\n", 
>>num_vfs);
>>-                     pdn->offset = 0;
>>-                     return -EBUSY;
>>              }
>>-             bitmap_set(phb->ioda.pe_alloc, pdn->offset, num_vfs);
>>              pdn->num_vfs = num_vfs;
>>-             mutex_unlock(&phb->ioda.pe_alloc_mutex);
>>
>>              /* Assign M64 window accordingly */
>>              ret = pnv_pci_vf_assign_m64(pdev, num_vfs);
>>@@ -1489,7 +1516,7 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 
>>num_vfs)
>>               * Otherwise, the PE# for the VF will conflict with others.
>>               */
>>              if (!pdn->m64_single_mode) {
>>-                     ret = pnv_pci_vf_resource_shift(pdev, pdn->offset);
>>+                     ret = pnv_pci_vf_resource_shift(pdev, *pdn->offset);
>>                      if (ret)
>>                              goto m64_failed;
>>              }
>>@@ -1501,8 +1528,12 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 
>>num_vfs)
>>      return 0;
>>
>> m64_failed:
>>-     bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
>>-     pdn->offset = 0;
>>+     if (pdn->m64_single_mode) {
>>+             for (i = 0; i < num_vfs; i++)
>>+                     pnv_ioda_free_pe(phb, pdn->offset[i]);
>>+     } else
>>+             bitmap_clear(phb->ioda.pe_alloc, *pdn->offset, num_vfs);
>>+     kfree(pdn->offset);
>>
>>      return ret;
>> }
>>-- 
>>1.7.9.5
>>

-- 
Richard Yang
Help you, Help me

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to