On Wed, Aug 05, 2015 at 09:31:41PM -0500, Scott Wood wrote: > On Wed, 2015-08-05 at 19:30 -0500, Segher Boessenkool wrote: > > On Wed, Aug 05, 2015 at 03:29:35PM +0200, Christophe Leroy wrote: > > > On the 8xx, load latency is 2 cycles and taking branches also takes > > > 2 cycles. So let's unroll the loop. > > > > This is not true for most other 32-bit PowerPC; this patch makes > > performance worse on e.g. 6xx/7xx/7xxx. Let's not! > > Chips with a load latency greater than 2 cycles should also benefit from the > unrolling. Have you benchmarked this somewhere and seen it reduce > performance? Do you know of any 32-bit PPC chips with a load latency less > than 2 cycles?
The original loop was already optimal, as the comment said. The new code adds extra instructions and a mispredicted branch. You also might get less overlap between the loads and adde (I didn't check if there is any originally): those instructions are no longer interleaved. I think it is a stupid idea to optimise code for all 32-bit PowerPC CPUs based on solely what is best for a particularly simple, slow implementation; and that is what this patch is doing. Segher _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
