From: Zhao Qiang <b45...@freescale.com> p1010rdb-pb use the irq[4:5] for inta and intb to pcie, it is active-high, so set it.
Signed-off-by: Zhao Qiang <b45...@freescale.com> Change-Id: I29db41b4a8b5a67c18151099884edda6de4d9d1a Reviewed-on: http://git.am.freescale.net:8181/9915 Tested-by: Review Code-CDREVIEW <cdrev...@freescale.com> Reviewed-by: Xiaobo Xie <x....@freescale.com> Reviewed-by: Jose Rivera <german.riv...@freescale.com> --- arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index 1804ed7..4313ff6 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -59,8 +59,12 @@ interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + /* + *irq[4:5] only for PCIe in dts, set to active-high + *irq[6:7] is pulled up on board, set to active-low + */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 >; -- 2.1.0.27.g96db324 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
