On Thu, 2015-03-26 at 16:42 +1100, Gavin Shan wrote:
> The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR)
> to inject the specified EEH error, which is represented by
> (struct vfio_eeh_pe_err), to the indicated PE for testing purpose.
>
> Signed-off-by: Gavin Shan <gws...@linux.vnet.ibm.com>
> Reviewed-by: David Gibson <da...@gibson.dropbear.id.au>
> ---
> Documentation/vfio.txt | 12 ++++++++++++
> drivers/vfio/vfio_spapr_eeh.c | 10 ++++++++++
> include/uapi/linux/vfio.h | 14 +++++++++++++-
> 3 files changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt
> index 96978ec..4c746a7 100644
> --- a/Documentation/vfio.txt
> +++ b/Documentation/vfio.txt
> @@ -385,6 +385,18 @@ The code flow from the example above should be slightly
> changed:
>
> ....
>
> + /* Inject EEH error, which is expected to be caused by 32-bits
> + * config load.
> + */
> + pe_op.op = VFIO_EEH_PE_INJECT_ERR;
> + pe_op.err.type = EEH_ERR_TYPE_32;
> + pe_op.err.func = EEH_ERR_FUNC_LD_CFG_ADDR;
> + pe_op.err.addr = 0ul;
> + pe_op.err.mask = 0ul;
> + ioctl(container, VFIO_EEH_PE_OP, &pe_op);
> +
> + ....
> +
> /* When 0xFF's returned from reading PCI config space or IO BARs
> * of the PCI device. Check the PE's state to see if that has been
> * frozen.
> diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c
> index 5fa42db..38edeb4 100644
> --- a/drivers/vfio/vfio_spapr_eeh.c
> +++ b/drivers/vfio/vfio_spapr_eeh.c
> @@ -85,6 +85,16 @@ long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
> case VFIO_EEH_PE_CONFIGURE:
> ret = eeh_pe_configure(pe);
> break;
> + case VFIO_EEH_PE_INJECT_ERR:
> + minsz = offsetofend(struct vfio_eeh_pe_op, err.mask);
> + if (op.argsz < minsz)
> + return -EINVAL;
> + if (copy_from_user(&op, (void __user *)arg, minsz))
> + return -EFAULT;
> +
> + ret = eeh_pe_inject_err(pe, op.err.type, op.err.func,
> + op.err.addr, op.err.mask);
> + break;
> default:
> ret = -EINVAL;
> }
> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> index 82889c3..d81c17f 100644
> --- a/include/uapi/linux/vfio.h
> +++ b/include/uapi/linux/vfio.h
> @@ -468,12 +468,23 @@ struct vfio_iommu_spapr_tce_info {
> * - unfreeze IO/DMA for frozen PE;
> * - read PE state;
> * - reset PE;
> - * - configure PE.
> + * - configure PE;
> + * - inject EEH error.
> */
> +struct vfio_eeh_pe_err {
> + __u32 type;
> + __u32 func;
> + __u64 addr;
> + __u64 mask;
> +};
> +
> struct vfio_eeh_pe_op {
> __u32 argsz;
> __u32 flags;
> __u32 op;
> + union {
> + struct vfio_eeh_pe_err err;
> + };
> };
>
> #define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */
> @@ -490,6 +501,7 @@ struct vfio_eeh_pe_op {
> #define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset
> */
> #define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental
> reset */
> #define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration
> */
> +#define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error
> */
>
> #define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21)
>
I assume you want this to go in through the PPC tree, so
Acked-by: Alex Williamson <alex.william...@redhat.com>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
