On Fri, 2015-02-20 at 09:43 -0500, Bob Cochran wrote: > On 02/05/2015 10:52 AM, Emil Medve wrote: > > Hello Bob, > > > > > > On 02/05/2015 09:48 AM, Bob Cochran wrote: > > > On 02/04/2015 09:48 AM, Emil Medve wrote: > > > > > > > > Hello, > > > > > > > > > > > > This is the first attempt to publish the Freescale DPAA B/QMan drivers. > > > > They are > > > > not to be applied yet. At this stage, this is more or less the drivers > > > > from the > > > > Freescale PowerPC SDK roughly squashed and split in a sequence of > > > > component > > > > patches. They still needs some work and cleanup before we expect to > > > > have them > > > > applied, but we appreciate early feedback > > > > > > > > > Hi Emil, > > > > > > I had thought to try to apply these patches and build it, but I won't get > > > very far using it without > > > FMAN (on my t1040). I searched through the mail archives and didn't > > > find FMAN patches other than for > > > the device tree. I also don't see it in the mainline tree. > > > > > > If FMAN patches have already been submitted, please point me to it. > > > > > > If not, then please let me know when we will see code to support FMAN. > > > > Let me inquire with the FMan guy here. I'll get back to you on this, > > however, don't hold your breath. > > There might be some weeks before the FMan driver will hit the e-mail lists > > > Hi Emil, > > Were you able to obtain information on when we'll see the FMAN driver patches > submitted? I would like to > be able to work with FSL DPAA on mainline. > > Thanks, > > Bob
Me too! I am happy just to get a normal ethernet interface though. Jocke _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
