On Wed, Nov 26, 2014 at 10:04:36AM +1100, Benjamin Herrenschmidt wrote:
>On Tue, 2014-11-25 at 09:49 +1100, Gavin Shan wrote:
>> The patch splits the code into 2 parts: RPA PCI hotplug slot
>> management and RTAS backend. It enables us to support PowerNV,
>> which is built on top of OPAL firmware in future.
>>
>> The patch also refactors the code for a bit:
>>
>> * Rename "struct slot" to "struct rpa_php_slot"
>> * All macros have prefix "RPA_PHP_SLOT"
>> * rpaphp_slot.c is removed and all logics moved to rpaphp_core.c
>
>
>I don't see the point of this. rpaphp is already itself a "backend", so
>we end up with yet another layer.
>
Yes, that's what I did.
>Just create a powernv-php or opal-php and if there is common code,
>factor it into a common helper but I wouldn't bother too much initially
>unless there is a lot of it.
>
Ok. I'll create powernv-php.
Thanks,
Gavin
>> Signed-off-by: Gavin Shan <gws...@linux.vnet.ibm.com>
>> ---
>> drivers/pci/hotplug/Makefile | 3 +-
>> drivers/pci/hotplug/rpadlpar_core.c | 10 +-
>> drivers/pci/hotplug/rpaphp.h | 64 +++----
>> drivers/pci/hotplug/rpaphp_core.c | 347
>> +++++++++++-------------------------
>> drivers/pci/hotplug/rpaphp_pci.c | 136 --------------
>> drivers/pci/hotplug/rpaphp_rtas.c | 320 +++++++++++++++++++++++++++++++++
>> drivers/pci/hotplug/rpaphp_slot.c | 140 ---------------
>> 7 files changed, 459 insertions(+), 561 deletions(-)
>> delete mode 100644 drivers/pci/hotplug/rpaphp_pci.c
>> create mode 100644 drivers/pci/hotplug/rpaphp_rtas.c
>> delete mode 100644 drivers/pci/hotplug/rpaphp_slot.c
>>
>> diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
>> index 4a9aa08..630313da 100644
>> --- a/drivers/pci/hotplug/Makefile
>> +++ b/drivers/pci/hotplug/Makefile
>> @@ -51,8 +51,7 @@ acpiphp-objs := acpiphp_core.o \
>> acpiphp_glue.o
>>
>> rpaphp-objs := rpaphp_core.o \
>> - rpaphp_pci.o \
>> - rpaphp_slot.o
>> + rpaphp_rtas.o
>>
>> rpadlpar_io-objs := rpadlpar_core.o \
>> rpadlpar_sysfs.o
>> diff --git a/drivers/pci/hotplug/rpadlpar_core.c
>> b/drivers/pci/hotplug/rpadlpar_core.c
>> index 35da3b3..a36d2c9 100644
>> --- a/drivers/pci/hotplug/rpadlpar_core.c
>> +++ b/drivers/pci/hotplug/rpadlpar_core.c
>> @@ -117,13 +117,13 @@ static struct device_node *find_dlpar_node(char
>> *drc_name, int *node_type)
>> * may be dlpar-able, but not hot-pluggable, so this routine
>> * will return NULL for built-in PCI slots.
>> */
>> -static struct slot *find_php_slot(struct device_node *dn)
>> +static struct rpa_php_slot *find_php_slot(struct device_node *dn)
>> {
>> struct list_head *tmp, *n;
>> - struct slot *slot;
>> + struct rpa_php_slot *slot;
>>
>> list_for_each_safe(tmp, n, &rpaphp_slot_head) {
>> - slot = list_entry(tmp, struct slot, rpaphp_slot_list);
>> + slot = list_entry(tmp, struct rpa_php_slot, rpaphp_slot_list);
>> if (slot->dn == dn)
>> return slot;
>> }
>> @@ -214,7 +214,7 @@ static int dlpar_add_pci_slot(char *drc_name, struct
>> device_node *dn)
>>
>> static int dlpar_remove_phb(char *drc_name, struct device_node *dn)
>> {
>> - struct slot *slot;
>> + struct rpa_php_slot *slot;
>> struct pci_dn *pdn;
>> int rc = 0;
>>
>> @@ -359,7 +359,7 @@ static int dlpar_remove_vio_slot(char *drc_name, struct
>> device_node *dn)
>> int dlpar_remove_pci_slot(char *drc_name, struct device_node *dn)
>> {
>> struct pci_bus *bus;
>> - struct slot *slot;
>> + struct rpa_php_slot *slot;
>> int ret = 0;
>>
>> pci_lock_rescan_remove();
>> diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h
>> index 39ddbdf..09dd516 100644
>> --- a/drivers/pci/hotplug/rpaphp.h
>> +++ b/drivers/pci/hotplug/rpaphp.h
>> @@ -30,21 +30,6 @@
>> #include <linux/pci.h>
>> #include <linux/pci_hotplug.h>
>>
>> -#define DR_INDICATOR 9002
>> -#define DR_ENTITY_SENSE 9003
>> -
>> -#define POWER_ON 100
>> -#define POWER_OFF 0
>> -
>> -#define LED_OFF 0
>> -#define LED_ON 1 /* continuous on */
>> -#define LED_ID 2 /* slow blinking */
>> -#define LED_ACTION 3 /* fast blinking */
>> -
>> -/* Sensor values from rtas_get-sensor */
>> -#define EMPTY 0 /* No card in slot */
>> -#define PRESENT 1 /* Card in slot */
>> -
>> #define MY_NAME "rpaphp"
>> extern bool rpaphp_debug;
>> #define dbg(format, arg...) \
>> @@ -57,19 +42,26 @@ extern bool rpaphp_debug;
>> #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ##
>> arg)
>> #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME ,
>> ## arg)
>>
>> -/* slot states */
>> +/* Power */
>> +#define RPA_PHP_SLOT_POWER_ON 1 /* On */
>> +#define RPA_PHP_SLOT_POWER_OFF 0 /* Off */
>>
>> -#define NOT_VALID 3
>> -#define NOT_CONFIGURED 2
>> -#define CONFIGURED 1
>> -#define EMPTY 0
>> +/* Attention */
>> +#define RPA_PHP_SLOT_ATTEN_OFF 0 /* Off */
>> +#define RPA_PHP_SLOT_ATTEN_ON 1 /* On */
>> +#define RPA_PHP_SLOT_ATTEN_IND 2 /* Slow blinking */
>> +#define RPA_PHP_SLOT_ATTEN_ACT 3 /* Fast blinking */
>>
>> -/*
>> - * struct slot - slot information for each *physical* slot
>> - */
>> -struct slot {
>> +/* Presence */
>> +#define RPA_PHP_SLOT_EMPTY 0 /* No card */
>> +#define RPA_PHP_SLOT_PRESENT 1 /* Presented */
>> +
>> +struct rpa_php_slot {
>> struct list_head rpaphp_slot_list;
>> int state;
>> +#define RPA_PHP_SLOT_NOT_CONFIGURED 0
>> +#define RPA_PHP_SLOT_CONFIGURED 1
>> +#define RPA_PHP_SLOT_NOT_VALID 2
>> u32 index;
>> u32 type;
>> u32 power_domain;
>> @@ -80,24 +72,20 @@ struct slot {
>> struct hotplug_slot *hotplug_slot;
>> };
>>
>> -extern struct hotplug_slot_ops rpaphp_hotplug_slot_ops;
>> extern struct list_head rpaphp_slot_head;
>>
>> -/* function prototypes */
>> -
>> -/* rpaphp_pci.c */
>> -int rpaphp_enable_slot(struct slot *slot);
>> -int rpaphp_get_sensor_state(struct slot *slot, int *state);
>> -
>> /* rpaphp_core.c */
>> int rpaphp_add_slot(struct device_node *dn);
>> -int rpaphp_get_drc_props(struct device_node *dn, int *drc_index,
>> - char **drc_name, char **drc_type, int *drc_power);
>> +void dealloc_slot_struct(struct rpa_php_slot *slot);
>> +struct rpa_php_slot *alloc_slot_struct(struct device_node *dn, int
>> drc_index,
>> + char *drc_name, int power_domain);
>> +int rpaphp_register_slot(struct rpa_php_slot *slot);
>> +int rpaphp_deregister_slot(struct rpa_php_slot *slot);
>> +int rpaphp_add_slot(struct device_node *dn);
>>
>> -/* rpaphp_slot.c */
>> -void dealloc_slot_struct(struct slot *slot);
>> -struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char
>> *drc_name, int power_domain);
>> -int rpaphp_register_slot(struct slot *slot);
>> -int rpaphp_deregister_slot(struct slot *slot);
>> +/* rpaphp_rtas.c */
>> +int rpaphp_get_drc_props(struct device_node *dn, int *drc_index,
>> + char **drc_name, char **drc_type, int *drc_power);
>> +struct rpa_php_slot *rpaphp_rtas_add_slot(struct device_node *dn);
>>
>> #endif /* _PPC64PHP_H */
>> diff --git a/drivers/pci/hotplug/rpaphp_core.c
>> b/drivers/pci/hotplug/rpaphp_core.c
>> index a639c5c..91eff8f 100644
>> --- a/drivers/pci/hotplug/rpaphp_core.c
>> +++ b/drivers/pci/hotplug/rpaphp_core.c
>> @@ -45,194 +45,118 @@ EXPORT_SYMBOL_GPL(rpaphp_slot_head);
>> #define DRIVER_AUTHOR "Linda Xie <l...@us.ibm.com>"
>> #define DRIVER_DESC "RPA HOT Plug PCI Controller Driver"
>>
>> -#define MAX_LOC_CODE 128
>> -
>> -MODULE_AUTHOR(DRIVER_AUTHOR);
>> -MODULE_DESCRIPTION(DRIVER_DESC);
>> -MODULE_LICENSE("GPL");
>> -
>> module_param_named(debug, rpaphp_debug, bool, 0644);
>>
>> -/**
>> - * set_attention_status - set attention LED
>> - * @hotplug_slot: target &hotplug_slot
>> - * @value: LED control value
>> - *
>> - * echo 0 > attention -- set LED OFF
>> - * echo 1 > attention -- set LED ON
>> - * echo 2 > attention -- set LED ID(identify, light is blinking)
>> - */
>> -static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
>> +/* free up the memory used by a slot */
>> +static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot)
>> {
>> - int rc;
>> - struct slot *slot = (struct slot *)hotplug_slot->private;
>> -
>> - switch (value) {
>> - case 0:
>> - case 1:
>> - case 2:
>> - break;
>> - default:
>> - value = 1;
>> - }
>> + struct rpa_php_slot *slot = hotplug_slot->private;
>>
>> - rc = rtas_set_indicator(DR_INDICATOR, slot->index, value);
>> - if (!rc)
>> - hotplug_slot->info->attention_status = value;
>> -
>> - return rc;
>> + dealloc_slot_struct(slot);
>> }
>>
>> -/**
>> - * get_power_status - get power status of a slot
>> - * @hotplug_slot: slot to get status
>> - * @value: pointer to store status
>> - */
>> -static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
>> +void dealloc_slot_struct(struct rpa_php_slot *slot)
>> {
>> - int retval, level;
>> - struct slot *slot = (struct slot *)hotplug_slot->private;
>> -
>> - retval = rtas_get_power_level(slot->power_domain, &level);
>> - if (!retval)
>> - *value = level;
>> - return retval;
>> + kfree(slot->hotplug_slot->info);
>> + kfree(slot->name);
>> + kfree(slot->hotplug_slot);
>> + kfree(slot);
>> }
>>
>> -/**
>> - * get_attention_status - get attention LED status
>> - * @hotplug_slot: slot to get status
>> - * @value: pointer to store status
>> - */
>> -static int get_attention_status(struct hotplug_slot *hotplug_slot, u8
>> *value)
>> +struct rpa_php_slot *alloc_slot_struct(struct device_node *dn,
>> + int drc_index, char *drc_name,
>> + int power_domain)
>> {
>> - struct slot *slot = (struct slot *)hotplug_slot->private;
>> - *value = slot->hotplug_slot->info->attention_status;
>> - return 0;
>> -}
>> -
>> -static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
>> -{
>> - struct slot *slot = (struct slot *)hotplug_slot->private;
>> - int rc, state;
>> -
>> - rc = rpaphp_get_sensor_state(slot, &state);
>> -
>> - *value = NOT_VALID;
>> - if (rc)
>> - return rc;
>> + struct rpa_php_slot *slot;
>>
>> - if (state == EMPTY)
>> - *value = EMPTY;
>> - else if (state == PRESENT)
>> - *value = slot->state;
>> -
>> - return 0;
>> + slot = kzalloc(sizeof(*slot), GFP_KERNEL);
>> + if (!slot)
>> + goto error_nomem;
>> + slot->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
>> + if (!slot->hotplug_slot)
>> + goto error_slot;
>> + slot->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info),
>> + GFP_KERNEL);
>> + if (!slot->hotplug_slot->info)
>> + goto error_hpslot;
>> + slot->name = kstrdup(drc_name, GFP_KERNEL);
>> + if (!slot->name)
>> + goto error_info;
>> + slot->dn = dn;
>> + slot->index = drc_index;
>> + slot->power_domain = power_domain;
>> + slot->hotplug_slot->private = slot;
>> + slot->hotplug_slot->release = &rpaphp_release_slot;
>> +
>> + slot->hotplug_slot->info->power_status = RPA_PHP_SLOT_POWER_ON;
>> + slot->hotplug_slot->info->attention_status = RPA_PHP_SLOT_ATTEN_OFF;
>> + slot->hotplug_slot->info->adapter_status = RPA_PHP_SLOT_EMPTY;
>> + slot->state = RPA_PHP_SLOT_NOT_VALID;
>> +
>> + return slot;
>> +
>> +error_info:
>> + kfree(slot->hotplug_slot->info);
>> +error_hpslot:
>> + kfree(slot->hotplug_slot);
>> +error_slot:
>> + kfree(slot);
>> +error_nomem:
>> + return NULL;
>> }
>>
>> -static enum pci_bus_speed get_max_bus_speed(struct slot *slot)
>> +int rpaphp_register_slot(struct rpa_php_slot *slot)
>> {
>> - enum pci_bus_speed speed;
>> - switch (slot->type) {
>> - case 1:
>> - case 2:
>> - case 3:
>> - case 4:
>> - case 5:
>> - case 6:
>> - speed = PCI_SPEED_33MHz; /* speed for case 1-6 */
>> - break;
>> - case 7:
>> - case 8:
>> - speed = PCI_SPEED_66MHz;
>> - break;
>> - case 11:
>> - case 14:
>> - speed = PCI_SPEED_66MHz_PCIX;
>> - break;
>> - case 12:
>> - case 15:
>> - speed = PCI_SPEED_100MHz_PCIX;
>> - break;
>> - case 13:
>> - case 16:
>> - speed = PCI_SPEED_133MHz_PCIX;
>> - break;
>> - default:
>> - speed = PCI_SPEED_UNKNOWN;
>> + struct hotplug_slot *php_slot = slot->hotplug_slot;
>> + struct rpa_php_slot *tmp;
>> + int slotno, retval;
>> +
>> + dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x]
>> type[%d]\n",
>> + __func__, slot->dn->full_name, slot->index, slot->name,
>> + slot->power_domain, slot->type);
>> +
>> + /* Should not try to register the same slot twice */
>> + list_for_each_entry(tmp, &rpaphp_slot_head, rpaphp_slot_list) {
>> + if (!strcmp(tmp->name, slot->name)) {
>> + err("%s: Slot[%s] is already registered\n",
>> + __func__, slot->name);
>> + return -EAGAIN;
>> + }
>> + }
>> + if (slot->dn->child)
>> + slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn);
>> + else
>> + slotno = -1;
>> + retval = pci_hp_register(php_slot, slot->bus, slotno, slot->name);
>> + if (retval) {
>> + err("pci_hp_register failed with error %d\n", retval);
>> + return retval;
>> }
>>
>> - return speed;
>> + /* add slot to our internal list */
>> + list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head);
>> + info("Slot [%s] registered\n", slot->name);
>> + return 0;
>> }
>>
>> -static int parse_drc_props(struct device_node *dn, u32 drc_index,
>> - char **drc_name, char **drc_type, u32 *drc_power)
>> +int rpaphp_deregister_slot(struct rpa_php_slot *slot)
>> {
>> - const u32 *indexes, *names, *types, *domains;
>> - char *name, *type;
>> - struct device_node *parent = dn;
>> - u32 i;
>> -
>> - while ((parent = of_get_parent(parent))) {
>> - indexes = of_get_property(parent, "ibm,drc-indexes", NULL);
>> - names = of_get_property(parent, "ibm,drc-names", NULL);
>> - types = of_get_property(parent, "ibm,drc-types", NULL);
>> - domains = of_get_property(parent, "ibm,drc-power-domains",
>> NULL);
>> -
>> - if (!indexes || !names || !types || !domains) {
>> - of_node_put(parent);
>> - continue;
>> - }
>> + struct hotplug_slot *php_slot = slot->hotplug_slot;
>> + int retval = 0;
>>
>> - name = (char *)&names[1];
>> - type = (char *)&types[1];
>> - for (i = 0; i < be32_to_cpu(indexes[0]); i++) {
>> - if (be32_to_cpu(indexes[i + 1]) != drc_index) {
>> - name += (strlen(name) + 1);
>> - type += (strlen(type) + 1);
>> - continue;
>> - }
>> -
>> - /* Matched index */
>> - if (drc_name)
>> - *drc_name = name;
>> - if (drc_type)
>> - *drc_type = type;
>> - if (drc_power)
>> - *drc_power = be32_to_cpu(domains[i + 1]);
>> -
>> - of_node_put(parent);
>> - return 0;
>> - }
>> -
>> - /* Next level parent */
>> - of_node_put(parent);
>> - }
>> + dbg("%s - Entry: deregistering slot=%s\n",
>> + __func__, slot->name);
>>
>> - return -ENODEV;
>> -}
>> + list_del(&slot->rpaphp_slot_list);
>>
>> -/*
>> - * To get the DRC props describing the current node, first obtain it's
>> - * my-drc-index property. Next obtain the DRC list from it's parent. Use
>> - * the my-drc-index for correlation, and obtain the requested properties.
>> - */
>> -int rpaphp_get_drc_props(struct device_node *dn, int *drc_index,
>> - char **drc_name, char **drc_type, int *drc_power)
>> -{
>> - const u32 *my_index;
>> -
>> - /* Check if node is capable of hotplug */
>> - my_index = of_get_property(dn, "ibm,my-drc-index", NULL);
>> - if (!my_index)
>> - return -EINVAL;
>> - if (drc_index)
>> - *drc_index = be32_to_cpu(*my_index);
>> + retval = pci_hp_deregister(php_slot);
>> + if (retval)
>> + err("Problem unregistering a slot %s\n", slot->name);
>>
>> - return parse_drc_props(dn, be32_to_cpu(*my_index),
>> - drc_name, drc_type, drc_power);
>> + dbg("%s - Exit: rc[%d]\n", __func__, retval);
>> + return retval;
>> }
>> -EXPORT_SYMBOL_GPL(rpaphp_get_drc_props);
>> +EXPORT_SYMBOL_GPL(rpaphp_deregister_slot);
>>
>> /**
>> * rpaphp_add_slot -- declare a hotplug slot to the hotplug subsystem.
>> @@ -252,29 +176,22 @@ EXPORT_SYMBOL_GPL(rpaphp_get_drc_props);
>> */
>> int rpaphp_add_slot(struct device_node *dn)
>> {
>> - char *name, *type, *endptr;
>> - int index, power_domain;
>> - struct slot *slot;
>> - int val, ret;
>> -
>> - /* Get and parse the hotplug properties */
>> - ret = rpaphp_get_drc_props(dn, &index, &name, &type, &power_domain);
>> - if (ret)
>> - return ret;
>> -
>> - /* PCI Hotplug nodes have an integer for drc_type */
>> - val = simple_strtoul(type, &endptr, 10);
>> - if (endptr == type)
>> - return -EINVAL;
>> + struct rpa_php_slot *slot = NULL;
>> + int ret;
>>
>> - slot = alloc_slot_struct(dn, index, name, power_domain);
>> + /* Create slot */
>> + if (machine_is(pseries))
>> + slot = rpaphp_rtas_add_slot(dn);
>> if (!slot)
>> - return -ENOMEM;
>> + return -EIO;
>>
>> - slot->type = val;
>> - ret = rpaphp_enable_slot(slot);
>> - if (!ret)
>> - ret = rpaphp_register_slot(slot);
>> + /* Enable slot */
>> + ret = slot->hotplug_slot->ops->enable_slot(slot->hotplug_slot);
>> + if (ret)
>> + goto fail;
>> +
>> + /* Register slot */
>> + ret = rpaphp_register_slot(slot);
>> if (ret)
>> goto fail;
>>
>> @@ -288,7 +205,7 @@ EXPORT_SYMBOL_GPL(rpaphp_add_slot);
>> static void __exit cleanup_slots(void)
>> {
>> struct list_head *tmp, *n;
>> - struct slot *slot;
>> + struct rpa_php_slot *slot;
>>
>> /*
>> * Unregister all of our slots with the pci_hotplug subsystem,
>> @@ -297,7 +214,7 @@ static void __exit cleanup_slots(void)
>> */
>>
>> list_for_each_safe(tmp, n, &rpaphp_slot_head) {
>> - slot = list_entry(tmp, struct slot, rpaphp_slot_list);
>> + slot = list_entry(tmp, struct rpa_php_slot, rpaphp_slot_list);
>> list_del(&slot->rpaphp_slot_list);
>> pci_hp_deregister(slot->hotplug_slot);
>> }
>> @@ -320,59 +237,9 @@ static void __exit rpaphp_exit(void)
>> cleanup_slots();
>> }
>>
>> -static int enable_slot(struct hotplug_slot *hotplug_slot)
>> -{
>> - struct slot *slot = (struct slot *)hotplug_slot->private;
>> - int state;
>> - int retval;
>> -
>> - if (slot->state == CONFIGURED)
>> - return 0;
>> -
>> - retval = rpaphp_get_sensor_state(slot, &state);
>> - if (retval)
>> - return retval;
>> -
>> - if (state == PRESENT) {
>> - pci_lock_rescan_remove();
>> - pcibios_add_pci_devices(slot->bus);
>> - pci_unlock_rescan_remove();
>> - slot->state = CONFIGURED;
>> - } else if (state == EMPTY) {
>> - slot->state = EMPTY;
>> - } else {
>> - err("%s: slot[%s] is in invalid state\n", __func__, slot->name);
>> - slot->state = NOT_VALID;
>> - return -EINVAL;
>> - }
>> -
>> - slot->bus->max_bus_speed = get_max_bus_speed(slot);
>> - return 0;
>> -}
>> -
>> -static int disable_slot(struct hotplug_slot *hotplug_slot)
>> -{
>> - struct slot *slot = (struct slot *)hotplug_slot->private;
>> - if (slot->state == NOT_CONFIGURED)
>> - return -EINVAL;
>> -
>> - pci_lock_rescan_remove();
>> - pcibios_remove_pci_devices(slot->bus);
>> - pci_unlock_rescan_remove();
>> - vm_unmap_aliases();
>> -
>> - slot->state = NOT_CONFIGURED;
>> - return 0;
>> -}
>> -
>> -struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
>> - .enable_slot = enable_slot,
>> - .disable_slot = disable_slot,
>> - .set_attention_status = set_attention_status,
>> - .get_power_status = get_power_status,
>> - .get_attention_status = get_attention_status,
>> - .get_adapter_status = get_adapter_status,
>> -};
>> -
>> module_init(rpaphp_init);
>> module_exit(rpaphp_exit);
>> +
>> +MODULE_AUTHOR(DRIVER_AUTHOR);
>> +MODULE_DESCRIPTION(DRIVER_DESC);
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/pci/hotplug/rpaphp_pci.c
>> b/drivers/pci/hotplug/rpaphp_pci.c
>> deleted file mode 100644
>> index a4aa65c..0000000
>> --- a/drivers/pci/hotplug/rpaphp_pci.c
>> +++ /dev/null
>> @@ -1,136 +0,0 @@
>> -/*
>> - * PCI Hot Plug Controller Driver for RPA-compliant PPC64 platform.
>> - * Copyright (C) 2003 Linda Xie <l...@us.ibm.com>
>> - *
>> - * All rights reserved.
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> - * it under the terms of the GNU General Public License as published by
>> - * the Free Software Foundation; either version 2 of the License, or (at
>> - * your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful, but
>> - * WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
>> - * NON INFRINGEMENT. See the GNU General Public License for more
>> - * details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> - *
>> - * Send feedback to <l...@us.ibm.com>
>> - *
>> - */
>> -#include <linux/pci.h>
>> -#include <linux/string.h>
>> -
>> -#include <asm/pci-bridge.h>
>> -#include <asm/rtas.h>
>> -#include <asm/machdep.h>
>> -
>> -#include "../pci.h" /* for pci_add_new_bus */
>> -#include "rpaphp.h"
>> -
>> -int rpaphp_get_sensor_state(struct slot *slot, int *state)
>> -{
>> - int rc;
>> - int setlevel;
>> -
>> - rc = rtas_get_sensor(DR_ENTITY_SENSE, slot->index, state);
>> - if (rc >= 0)
>> - return rc;
>> - if (rc != -EFAULT && rc != -EEXIST) {
>> - err("%s: Failure %d getting sensor state on slot[%s]\n",
>> - __func__, rc, slot->name);
>> - return rc;
>> - }
>> -
>> -
>> - /*
>> - * Some slots have to be powered up before
>> - * get-sensor will succeed
>> - */
>> - dbg("%s: Slot[%s] must be power up to get sensor-state\n",
>> - __func__, slot->name);
>> - rc = rtas_set_power_level(slot->power_domain, POWER_ON,
>> - &setlevel);
>> - if (rc < 0) {
>> - dbg("%s: Failure %d powerng on slot[%s]\n",
>> - __func__, rc, slot->name);
>> - return rc;
>> - }
>> -
>> - return rtas_get_sensor(DR_ENTITY_SENSE,
>> - slot->index, state);
>> -}
>> -
>> -/**
>> - * rpaphp_enable_slot - record slot state, config pci device
>> - * @slot: target &slot
>> - *
>> - * Initialize values in the slot, and the hotplug_slot info
>> - * structures to indicate if there is a pci card plugged into
>> - * the slot. If the slot is not empty, run the pcibios routine
>> - * to get pcibios stuff correctly set up.
>> - */
>> -int rpaphp_enable_slot(struct slot *slot)
>> -{
>> - int rc, level, state;
>> - struct pci_bus *bus;
>> - struct hotplug_slot_info *info = slot->hotplug_slot->info;
>> -
>> - info->adapter_status = NOT_VALID;
>> - slot->state = EMPTY;
>> -
>> - /* Find out if the power is turned on for the slot */
>> - rc = rtas_get_power_level(slot->power_domain, &level);
>> - if (rc)
>> - return rc;
>> - info->power_status = level;
>> -
>> - /* Figure out if there is an adapter in the slot */
>> - rc = rpaphp_get_sensor_state(slot, &state);
>> - if (rc)
>> - return rc;
>> -
>> - bus = pcibios_find_pci_bus(slot->dn);
>> - if (!bus) {
>> - err("%s: no pci_bus for dn %s\n", __func__,
>> slot->dn->full_name);
>> - return -EINVAL;
>> - }
>> -
>> - info->adapter_status = EMPTY;
>> - slot->bus = bus;
>> - slot->pci_devs = &bus->devices;
>> -
>> - /* if there's an adapter in the slot, go add the pci devices */
>> - if (state == PRESENT) {
>> - info->adapter_status = NOT_CONFIGURED;
>> - slot->state = NOT_CONFIGURED;
>> -
>> - /* non-empty slot has to have child */
>> - if (!slot->dn->child) {
>> - err("%s: slot[%s]'s device_node doesn't have child for
>> adapter\n",
>> - __func__, slot->name);
>> - return -EINVAL;
>> - }
>> -
>> - if (list_empty(&bus->devices))
>> - pcibios_add_pci_devices(bus);
>> -
>> - if (!list_empty(&bus->devices)) {
>> - info->adapter_status = CONFIGURED;
>> - slot->state = CONFIGURED;
>> - }
>> -
>> - if (rpaphp_debug) {
>> - struct pci_dev *dev;
>> - dbg("%s: pci_devs of slot[%s]\n", __func__,
>> slot->dn->full_name);
>> - list_for_each_entry (dev, &bus->devices, bus_list)
>> - dbg("\t%s\n", pci_name(dev));
>> - }
>> - }
>> -
>> - return 0;
>> -}
>> diff --git a/drivers/pci/hotplug/rpaphp_rtas.c
>> b/drivers/pci/hotplug/rpaphp_rtas.c
>> new file mode 100644
>> index 0000000..74f024a
>> --- /dev/null
>> +++ b/drivers/pci/hotplug/rpaphp_rtas.c
>> @@ -0,0 +1,320 @@
>> +/*
>> + * RTAS backend for RPA-compliant PP64 platform
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or (at
>> + * your option) any later version.
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/moduleparam.h>
>> +#include <linux/pci.h>
>> +#include <linux/pci_hotplug.h>
>> +#include <linux/smp.h>
>> +#include <linux/init.h>
>> +#include <linux/vmalloc.h>
>> +#include <asm/eeh.h>
>> +#include <asm/rtas.h>
>> +#include <asm/pci-bridge.h>
>> +
>> +#include "../pci.h"
>> +#include "rpaphp.h"
>> +
>> +#define RPA_PHP_DR_INDICATOR 9002
>> +#define RPA_PHP_DR_ENTITY_SENSE 9003
>> +
>> +static int get_power_status(struct hotplug_slot *hp_slot, u8 *val)
>> +{
>> + struct rpa_php_slot *slot = hp_slot->private;
>> + int state, ret;
>> +
>> + /* By default, the power is on */
>> + *val = RPA_PHP_SLOT_POWER_ON;
>> +
>> + /* Retrieve power state from firmware, which might fail */
>> + ret = rtas_get_power_level(slot->power_domain, &state);
>> + if (!ret) {
>> + if (state > 0)
>> + hp_slot->info->power_status = RPA_PHP_SLOT_POWER_ON;
>> + else
>> + hp_slot->info->power_status = RPA_PHP_SLOT_POWER_OFF;
>> + *val = hp_slot->info->power_status;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int get_adapter_status(struct hotplug_slot *hp_slot, u8 *val)
>> +{
>> + struct rpa_php_slot *slot = hp_slot->private;
>> + int state, ret;
>> +
>> + /* By default, the slot is empty */
>> + *val = RPA_PHP_SLOT_EMPTY;
>> +
>> + /* Retrieve presence from firmware */
>> + ret = rtas_get_sensor(RPA_PHP_DR_ENTITY_SENSE, slot->index, &state);
>> + if (ret >= 0) {
>> + if (state > 0)
>> + hp_slot->info->adapter_status = RPA_PHP_SLOT_PRESENT;
>> + else
>> + hp_slot->info->adapter_status = RPA_PHP_SLOT_EMPTY;
>> + *val = hp_slot->info->adapter_status;
>> + return 0;
>> + }
>> +
>> + /* Check if we need power slot on and retry */
>> + if (ret != -EFAULT && ret != -EEXIST) {
>> + err("%s: Error %d getting slot[%s] presence\n",
>> + __func__, ret, slot->name);
>> + return ret;
>> + }
>> +
>> + /* Power slot on, which might fail */
>> + ret = rtas_set_power_level(slot->power_domain,
>> + RPA_PHP_SLOT_POWER_ON, &state);
>> + if (!ret)
>> + hp_slot->info->power_status = RPA_PHP_SLOT_POWER_ON;
>> +
>> + /* Recheck the presence */
>> + ret = rtas_get_sensor(RPA_PHP_DR_ENTITY_SENSE, slot->index, &state);
>> + if (ret >= 0) {
>> + if (state > 0)
>> + hp_slot->info->adapter_status = RPA_PHP_SLOT_PRESENT;
>> + else
>> + hp_slot->info->adapter_status = RPA_PHP_SLOT_EMPTY;
>> + *val = hp_slot->info->adapter_status;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int set_attention_status(struct hotplug_slot *hp_slot, u8 val)
>> +{
>> + struct rpa_php_slot *slot = hp_slot->private;
>> + int ret;
>> +
>> + /*
>> + * The default operation would to turn on
>> + * the attention
>> + */
>> + switch (val) {
>> + case RPA_PHP_SLOT_ATTEN_OFF:
>> + case RPA_PHP_SLOT_ATTEN_ON:
>> + case RPA_PHP_SLOT_ATTEN_IND:
>> + case RPA_PHP_SLOT_ATTEN_ACT:
>> + break;
>> + default:
>> + val = RPA_PHP_SLOT_ATTEN_ON;
>> + }
>> +
>> + /* Set the attention */
>> + ret = rtas_set_indicator(RPA_PHP_DR_INDICATOR, slot->index, val);
>> + if (!ret)
>> + hp_slot->info->attention_status = val;
>> +
>> + return ret;
>> +}
>> +
>> +static enum pci_bus_speed get_max_bus_speed(struct rpa_php_slot *slot)
>> +{
>> + enum pci_bus_speed speed;
>> +
>> + switch (slot->type) {
>> + case 1 ... 6:
>> + speed = PCI_SPEED_33MHz;
>> + break;
>> + case 7 ... 8:
>> + speed = PCI_SPEED_66MHz;
>> + break;
>> + case 11:
>> + case 14:
>> + speed = PCI_SPEED_66MHz_PCIX;
>> + break;
>> + case 12:
>> + case 15:
>> + speed = PCI_SPEED_100MHz_PCIX;
>> + break;
>> + case 13:
>> + case 16:
>> + speed = PCI_SPEED_133MHz_PCIX;
>> + break;
>> + default:
>> + speed = PCI_SPEED_UNKNOWN;
>> + }
>> +
>> + return speed;
>> +}
>> +
>> +static int enable_slot(struct hotplug_slot *hp_slot)
>> +{
>> + struct rpa_php_slot *slot = hp_slot->private;
>> + uint8_t presence;
>> + int ret;
>> +
>> + /* Check if the slot has been configured */
>> + if (slot->state == RPA_PHP_SLOT_CONFIGURED)
>> + return 0;
>> +
>> + /* Retrieve slot presence status */
>> + ret = hp_slot->ops->get_adapter_status(hp_slot, &presence);
>> + if (ret)
>> + return ret;
>> +
>> + switch (presence) {
>> + case RPA_PHP_SLOT_PRESENT:
>> + pci_lock_rescan_remove();
>> + pcibios_add_pci_devices(slot->bus);
>> + pci_unlock_rescan_remove();
>> + slot->state = RPA_PHP_SLOT_CONFIGURED;
>> + break;
>> + case RPA_PHP_SLOT_EMPTY:
>> + slot->state = RPA_PHP_SLOT_NOT_CONFIGURED;
>> + break;
>> + default:
>> + slot->state = RPA_PHP_SLOT_NOT_VALID;
>> + return -EINVAL;
>> + }
>> +
>> + /* Fix the bus maximal speed */
>> + slot->bus->max_bus_speed = get_max_bus_speed(slot);
>> + return 0;
>> +}
>> +
>> +static int disable_slot(struct hotplug_slot *hp_slot)
>> +{
>> + struct rpa_php_slot *slot = hp_slot->private;
>> +
>> + if (slot->state != RPA_PHP_SLOT_CONFIGURED)
>> + return 0;
>> +
>> + pci_lock_rescan_remove();
>> + pcibios_remove_pci_devices(slot->bus);
>> + pci_unlock_rescan_remove();
>> + vm_unmap_aliases();
>> +
>> + slot->state = RPA_PHP_SLOT_NOT_CONFIGURED;
>> + return 0;
>> +}
>> +
>> +static struct hotplug_slot_ops rpaphp_rtas_ops = {
>> + .enable_slot = enable_slot,
>> + .disable_slot = disable_slot,
>> + .set_attention_status = set_attention_status,
>> + .get_power_status = get_power_status,
>> + .get_adapter_status = get_adapter_status,
>> +};
>> +
>> +static int parse_drc_props(struct device_node *dn, u32 drc_index,
>> + char **drc_name, char **drc_type, u32 *drc_power)
>> +{
>> + const u32 *indexes, *names, *types, *domains;
>> + char *name, *type;
>> + struct device_node *parent = dn;
>> + u32 i;
>> +
>> + while ((parent = of_get_parent(parent))) {
>> + indexes = of_get_property(parent, "ibm,drc-indexes", NULL);
>> + names = of_get_property(parent, "ibm,drc-names", NULL);
>> + types = of_get_property(parent, "ibm,drc-types", NULL);
>> + domains = of_get_property(parent, "ibm,drc-power-domains",
>> NULL);
>> +
>> + if (!indexes || !names || !types || !domains) {
>> + of_node_put(parent);
>> + continue;
>> + }
>> +
>> + name = (char *)&names[1];
>> + type = (char *)&types[1];
>> + for (i = 0; i < be32_to_cpu(indexes[0]); i++) {
>> + if (be32_to_cpu(indexes[i + 1]) != drc_index) {
>> + name += (strlen(name) + 1);
>> + type += (strlen(type) + 1);
>> + continue;
>> + }
>> +
>> + /* Matched index */
>> + if (drc_name)
>> + *drc_name = name;
>> + if (drc_type)
>> + *drc_type = type;
>> + if (drc_power)
>> + *drc_power = be32_to_cpu(domains[i + 1]);
>> +
>> + of_node_put(parent);
>> + return 0;
>> + }
>> +
>> + /* Next level parent */
>> + of_node_put(parent);
>> + }
>> +
>> + return -ENODEV;
>> +}
>> +
>> +/*
>> + * To get the DRC props describing the current node, first obtain it's
>> + * my-drc-index property. Next obtain the DRC list from it's parent. Use
>> + * the my-drc-index for correlation, and obtain the requested properties.
>> + */
>> +int rpaphp_get_drc_props(struct device_node *dn, int *drc_index,
>> + char **drc_name, char **drc_type, int *drc_power)
>> +{
>> + const u32 *my_index;
>> +
>> + /* Check if node is capable of hotplug */
>> + my_index = of_get_property(dn, "ibm,my-drc-index", NULL);
>> + if (!my_index)
>> + return -EINVAL;
>> + if (drc_index)
>> + *drc_index = be32_to_cpu(*my_index);
>> +
>> + return parse_drc_props(dn, be32_to_cpu(*my_index),
>> + drc_name, drc_type, drc_power);
>> +}
>> +EXPORT_SYMBOL_GPL(rpaphp_get_drc_props);
>> +
>> +struct rpa_php_slot *rpaphp_rtas_add_slot(struct device_node *dn)
>> +{
>> + char *name, *type, *endptr;
>> + int index, power_domain;
>> + struct rpa_php_slot *slot;
>> + struct pci_bus *bus;
>> + int val, ret;
>> +
>> + /* Get and parse the hotplug properties */
>> + ret = rpaphp_get_drc_props(dn, &index, &name, &type, &power_domain);
>> + if (ret)
>> + return NULL;
>> +
>> + /*
>> + * PCI hotplug slots have integer DRC type. That of
>> + * PHB slot is fixed to "PHB"
>> + */
>> + val = simple_strtoul(type, &endptr, 10);
>> + if (strcmp(type, "PHB") && (endptr == type))
>> + return NULL;
>> +
>> + slot = alloc_slot_struct(dn, index, name, power_domain);
>> + if (!slot)
>> + return NULL;
>> +
>> + /* The slot should have an associated bus */
>> + bus = pcibios_find_pci_bus(dn);
>> + if (!bus) {
>> + err("%s: No PCI bus for device node %s\n",
>> + __func__, dn->full_name);
>> + goto fail;
>> + }
>> +
>> + slot->hotplug_slot->ops = &rpaphp_rtas_ops;
>> + slot->type = val;
>> + slot->bus = bus;
>> + slot->pci_devs = &bus->devices;
>> + return slot;
>> +fail:
>> + dealloc_slot_struct(slot);
>> + return NULL;
>> +}
>> diff --git a/drivers/pci/hotplug/rpaphp_slot.c
>> b/drivers/pci/hotplug/rpaphp_slot.c
>> deleted file mode 100644
>> index be48e69..0000000
>> --- a/drivers/pci/hotplug/rpaphp_slot.c
>> +++ /dev/null
>> @@ -1,140 +0,0 @@
>> -/*
>> - * RPA Virtual I/O device functions
>> - * Copyright (C) 2004 Linda Xie <l...@us.ibm.com>
>> - *
>> - * All rights reserved.
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> - * it under the terms of the GNU General Public License as published by
>> - * the Free Software Foundation; either version 2 of the License, or (at
>> - * your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful, but
>> - * WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
>> - * NON INFRINGEMENT. See the GNU General Public License for more
>> - * details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> - *
>> - * Send feedback to <l...@us.ibm.com>
>> - *
>> - */
>> -#include <linux/kernel.h>
>> -#include <linux/module.h>
>> -#include <linux/sysfs.h>
>> -#include <linux/pci.h>
>> -#include <linux/string.h>
>> -#include <linux/slab.h>
>> -
>> -#include <asm/rtas.h>
>> -#include "rpaphp.h"
>> -
>> -/* free up the memory used by a slot */
>> -static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot)
>> -{
>> - struct slot *slot = (struct slot *) hotplug_slot->private;
>> - dealloc_slot_struct(slot);
>> -}
>> -
>> -void dealloc_slot_struct(struct slot *slot)
>> -{
>> - kfree(slot->hotplug_slot->info);
>> - kfree(slot->name);
>> - kfree(slot->hotplug_slot);
>> - kfree(slot);
>> -}
>> -
>> -struct slot *alloc_slot_struct(struct device_node *dn,
>> - int drc_index, char *drc_name, int power_domain)
>> -{
>> - struct slot *slot;
>> -
>> - slot = kzalloc(sizeof(struct slot), GFP_KERNEL);
>> - if (!slot)
>> - goto error_nomem;
>> - slot->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
>> - if (!slot->hotplug_slot)
>> - goto error_slot;
>> - slot->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info),
>> - GFP_KERNEL);
>> - if (!slot->hotplug_slot->info)
>> - goto error_hpslot;
>> - slot->name = kstrdup(drc_name, GFP_KERNEL);
>> - if (!slot->name)
>> - goto error_info;
>> - slot->dn = dn;
>> - slot->index = drc_index;
>> - slot->power_domain = power_domain;
>> - slot->hotplug_slot->private = slot;
>> - slot->hotplug_slot->ops = &rpaphp_hotplug_slot_ops;
>> - slot->hotplug_slot->release = &rpaphp_release_slot;
>> -
>> - return slot;
>> -
>> -error_info:
>> - kfree(slot->hotplug_slot->info);
>> -error_hpslot:
>> - kfree(slot->hotplug_slot);
>> -error_slot:
>> - kfree(slot);
>> -error_nomem:
>> - return NULL;
>> -}
>> -
>> -int rpaphp_deregister_slot(struct slot *slot)
>> -{
>> - int retval = 0;
>> - struct hotplug_slot *php_slot = slot->hotplug_slot;
>> -
>> - dbg("%s - Entry: deregistering slot=%s\n",
>> - __func__, slot->name);
>> -
>> - list_del(&slot->rpaphp_slot_list);
>> -
>> - retval = pci_hp_deregister(php_slot);
>> - if (retval)
>> - err("Problem unregistering a slot %s\n", slot->name);
>> -
>> - dbg("%s - Exit: rc[%d]\n", __func__, retval);
>> - return retval;
>> -}
>> -EXPORT_SYMBOL_GPL(rpaphp_deregister_slot);
>> -
>> -int rpaphp_register_slot(struct slot *slot)
>> -{
>> - struct hotplug_slot *php_slot = slot->hotplug_slot;
>> - struct slot *tmp;
>> - int retval;
>> - int slotno;
>> -
>> - dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x]
>> type[%d]\n",
>> - __func__, slot->dn->full_name, slot->index, slot->name,
>> - slot->power_domain, slot->type);
>> -
>> - /* Should not try to register the same slot twice */
>> - list_for_each_entry(tmp, &rpaphp_slot_head, rpaphp_slot_list) {
>> - if (!strcmp(tmp->name, slot->name)) {
>> - err("%s: Slot[%s] is already registered\n",
>> - __func__, slot->name);
>> - return -EAGAIN;
>> - }
>> - }
>> -
>> - if (slot->dn->child)
>> - slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn);
>> - else
>> - slotno = -1;
>> - retval = pci_hp_register(php_slot, slot->bus, slotno, slot->name);
>> - if (retval) {
>> - err("pci_hp_register failed with error %d\n", retval);
>> - return retval;
>> - }
>> -
>> - /* add slot to our internal list */
>> - list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head);
>> - info("Slot [%s] registered\n", slot->name);
>> - return 0;
>> -}
>
>
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
