On 11/16/2014 10:47 PM, Neelesh Gupta wrote:
The patch exposes the available i2c busses on the PowerNV platform
to the kernel and implements the bus driver to support i2c and
smbus commands.
The driver uses the platform device infrastructure to probe the busses
on the platform and registers them with the i2c driver framework.
Signed-off-by: Neelesh Gupta <neele...@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <b...@kernel.crashing.org>
---
Hi Wolfram,
Did you get the chance to look at it?
The patch addresses the comments and discussions on v1.
Thanks,
Neelesh
arch/powerpc/include/asm/opal.h | 29 ++
arch/powerpc/platforms/powernv/opal-wrappers.S | 1
arch/powerpc/platforms/powernv/opal.c | 11 +
drivers/i2c/busses/Kconfig | 11 +
drivers/i2c/busses/Makefile | 1
drivers/i2c/busses/i2c-opal.c | 295 ++++++++++++++++++++++++
6 files changed, 348 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-opal.c
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 9124b0e..537807b 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
