> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Tuesday, November 11, 2014 8:23 AM
> To: shh....@gmail.com
> Cc: linuxppc-dev@lists.ozlabs.org; devicet...@vger.kernel.org; Medve
> Emilian-EMMEDVE1; Xie Shaohui-B21989
> Subject: Re: [PATCH] DT: add MDIO node for FMan node
>
> On Tue, 2014-11-04 at 19:56 +0800, shh....@gmail.com wrote:
> > From: Shaohui Xie <shaohui....@freescale.com>
> >
> > This binding is for FMan MDIO, it covers FMan v2 & FMan v3.
> >
> > Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
> > ---
> > based on http://patchwork.ozlabs.org/patch/390351/
> > for 'next' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git
>
> Are there any other FMan pieces that are missing from the above patch?
[S.H] I'm adding Igal for this comment.
>
> > .../devicetree/bindings/powerpc/fsl/fman.txt | 69
> ++++++++++++++++++++++
> > 1 file changed, 69 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > index da8e5f2..83c2f14 100644
> > --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > @@ -7,6 +7,7 @@ CONTENTS
> > - FMan MURAM Node
> > - FMan dTSEC/XGEC/mEMAC Node
> > - FMan IEEE 1588 Node
> > + - FMan MDIO Node
> > - Example
> >
> >
> > ======================================================================
> > ======= @@ -352,6 +353,67 @@ ptp-timer@fe000 { };
> >
> >
> > ======================================================================
> > =======
> > +FMan MDIO Node
> > +
> > +DESCRIPTION
> > +
> > +The MDIO is a bus to which the PHY devices are connected.
> > +
> > +PROPERTIES
> > +
> > +- compatible
> > + Usage: required
> > + Value type: <stringlist>
> > + Definition: A standard property.
> > + Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
> > + Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
> > + Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
> > + FMan v3.
> > +
> > +- reg
> > + Usage: required
> > + Value type: <prop-encoded-array>
> > + Definition: A standard property.
> > +
> > +- bus-frequency
> > + Usage: optional
> > + Value type: <u32>
> > + Definition: Default MDIO bus clock speed.
>
> Use clocks/clock-names
[S.H] The MDIO uses Fman clock and divides it to a proper value which is
specified by this property.
>
> > +- interrupts
> > + Usage: optional
> > + Value type: <prop-encoded-array>
> > + Definition: MDIO controller event interrupts.
>
> One interrupt or multiple?
[S.H] One for 1 Gb/s, one for 10 Gb/s.
>
> > +
> > +- type
> > + Usage: required for FMan v3
> > + Value type: <stringlist>
> > + Definition: A standard property.
>
> What standard is "type" defined in?
[S.H] It's to differentiate between the internal and external MDIO, I'm not
quite sure about naming it, or what could be better way to differentiate the
MDIOs?
>
> > + FMan v3 has internal MDIO for internal PCS(Physical Coding
> > + Sublayer) PHYs and external MDIO for external PHYs.
> > + The settings and programming routines for internal/external
> > + MDIO are different. Must include "internal" for internal MDIO,
> > + must include "external" for external MDIO.
>
> I assume fman v2 is always internal? How about a boolean "fsl,fman-
> internal-phy" property instead?
[S.H] Both Fman v2 & v3 have internal/external MDIO, Fman v2 uses internal MDIO
for TBI operations to set the SGMII PHY,
The TBI implements transmit/receive portions of PCS, it's not used in Linux.
The PCS on Fman V3 are not just for SGMII, it has more implementations, it's
used in Linux.
>
> > +
> > +EXAMPLE
> > +
> > +Example for FMan v2:
> > +
> > +mdio@f1000 {
> > + compatible = "fsl,fman-xmdio";
> > + reg = <0xf1000 0x1000>;
> > +};
> > +
> > +Example for FMan v3:
> > +
> > +mdio@fd000 {
> > + compatible = "fsl,fman-memac-mdio";
> > + reg = <0xfd000 0x1000>;
> > + bus-frequency = <2500000>;
> > + type = "external";
> > +};
> > +
> > +=====================================================================
> > +========
> > Example
> >
> > fman@400000 {
> > @@ -526,4 +588,11 @@ fman@400000 {
> > compatible = "fsl,fman-ptp-timer";
> > reg = <0xfe000 0x1000>;
> > };
> > +
> > + mdio@fd000 {
> > + compatible = "fsl,fman-memac-mdio";
> > + reg = <0xfd000 0x1000>;
> > + bus-frequency = <2500000>;
> > + type = "external";
> > + };
> > };
>
> The rest of the example is fman v2; don't mix an fman v3 node in with
> that.
[S.H] OK. Will fix it.
Thanks!
Shaohui
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
