From: Ian Munsie <imun...@au1.ibm.com>
Some of the MSI IRQ code in pnv_pci_ioda_msi_setup() is generically useful so
split it out.
This will be used by some of the cxl PCIe code later.
Signed-off-by: Ian Munsie <imun...@au1.ibm.com>
Signed-off-by: Michael Neuling <mi...@neuling.org>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 43 ++++++++++++++++++-------------
1 file changed, 25 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
b/arch/powerpc/platforms/powernv/pci-ioda.c
index df241b1..329164f 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1306,14 +1306,36 @@ static void pnv_ioda2_msi_eoi(struct irq_data *d)
icp_native_eoi(d);
}
+
+static void set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq)
+{
+ struct irq_data *idata;
+ struct irq_chip *ichip;
+
+ if (phb->type != PNV_PHB_IODA2)
+ return;
+
+ /*
+ * Change the IRQ chip for the MSI interrupts on PHB3.
+ * The corresponding IRQ chip should be populated for
+ * the first time.
+ */
+ if (!phb->ioda.irq_chip_init) {
+ idata = irq_get_irq_data(virq);
+ ichip = irq_data_get_irq_chip(idata);
+ phb->ioda.irq_chip_init = 1;
+ phb->ioda.irq_chip = *ichip;
+ phb->ioda.irq_chip.irq_eoi = pnv_ioda2_msi_eoi;
+ }
+ irq_set_chip(virq, &phb->ioda.irq_chip);
+}
+
static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
unsigned int hwirq, unsigned int virq,
unsigned int is_64, struct msi_msg *msg)
{
struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
struct pci_dn *pdn = pci_get_pdn(dev);
- struct irq_data *idata;
- struct irq_chip *ichip;
unsigned int xive_num = hwirq - phb->msi_base;
__be32 data;
int rc;
@@ -1365,22 +1387,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb,
struct pci_dev *dev,
}
msg->data = be32_to_cpu(data);
- /*
- * Change the IRQ chip for the MSI interrupts on PHB3.
- * The corresponding IRQ chip should be populated for
- * the first time.
- */
- if (phb->type == PNV_PHB_IODA2) {
- if (!phb->ioda.irq_chip_init) {
- idata = irq_get_irq_data(virq);
- ichip = irq_data_get_irq_chip(idata);
- phb->ioda.irq_chip_init = 1;
- phb->ioda.irq_chip = *ichip;
- phb->ioda.irq_chip.irq_eoi = pnv_ioda2_msi_eoi;
- }
-
- irq_set_chip(virq, &phb->ioda.irq_chip);
- }
+ set_msi_irq_chip(phb, virq);
pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d),"
" address=%x_%08x data=%x PE# %d\n",
--
1.9.1
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
