> > +
> > +int copro_data_segment(struct mm_struct *mm, u64 ea, u64 *esid, u64 *vsid)
> > +{
> > + int psize, ssize;
> > +
> > + *esid = (ea & ESID_MASK) | SLB_ESID_V;
> > +
> > + switch (REGION_ID(ea)) {
> > + case USER_REGION_ID:
> > + pr_devel("copro_data_segment: 0x%llx -- USER_REGION_ID\n", ea);
> > +#ifdef CONFIG_PPC_MM_SLICES
> > + psize = get_slice_psize(mm, ea);
> > +#else
> > + psize = mm->context.user_psize;
> > +#endif
> > + ssize = user_segment_size(ea);
> > + *vsid = (get_vsid(mm->context.id, ea, ssize)
> > + << slb_vsid_shift(ssize)) | SLB_VSID_USER
> > + | (ssize == MMU_SEGSIZE_1T ? SLB_VSID_B_1T : 0);
> > + break;
> > + case VMALLOC_REGION_ID:
> > + pr_devel("copro_data_segment: 0x%llx -- VMALLOC_REGION_ID\n",
> > ea);
> > + if (ea < VMALLOC_END)
> > + psize = mmu_vmalloc_psize;
> > + else
> > + psize = mmu_io_psize;
> > + *vsid = (get_kernel_vsid(ea, mmu_kernel_ssize)
> > + << SLB_VSID_SHIFT) | SLB_VSID_KERNEL
> > + | (mmu_kernel_ssize == MMU_SEGSIZE_1T ? SLB_VSID_B_1T :
> > 0);
> > + break;
> > + case KERNEL_REGION_ID:
> > + pr_devel("copro_data_segment: 0x%llx -- KERNEL_REGION_ID\n",
> > ea);
> > + psize = mmu_linear_psize;
> > + *vsid = (get_kernel_vsid(ea, mmu_kernel_ssize)
> > + << SLB_VSID_SHIFT) | SLB_VSID_KERNEL
> > + | (mmu_kernel_ssize == MMU_SEGSIZE_1T ? SLB_VSID_B_1T :
> > 0);
> > + break;
> > + default:
> > + /* Future: support kernel segments so that drivers can use the
> > + * CoProcessors */
> > + pr_debug("invalid region access at %016llx\n", ea);
> > + return 1;
> > + }
> > + *vsid |= mmu_psize_defs[psize].sllp;
>
> A bit of a nitpick, but how about you remove the repeated:
>
> | (<size> == MMU_SEGSIZE_1T ? SLB_VSID_B_1T : 0)
>
> then set ssize in each of the switch cases (like we do with psize), and
> or-in the VSID_B_1T bit at the end:
>
> *vsid |= mmu_psize_defs[psize].sllp
> | (ssize == MMU_SEGSIZE_1T ? SLB_VSID_B_1T : 0);
Nice. I think below is what you mean.
I'll fold this into the existing patch and repost in a few days.
Thanks,
Mikey
diff --git a/arch/powerpc/mm/copro_fault.c b/arch/powerpc/mm/copro_fault.c
index 4105a63..939caf6 100644
--- a/arch/powerpc/mm/copro_fault.c
+++ b/arch/powerpc/mm/copro_fault.c
@@ -107,8 +107,7 @@ int copro_data_segment(struct mm_struct *mm, u64 ea, u64
*esid, u64 *vsid)
#endif
ssize = user_segment_size(ea);
*vsid = (get_vsid(mm->context.id, ea, ssize)
- << slb_vsid_shift(ssize)) | SLB_VSID_USER
- | (ssize == MMU_SEGSIZE_1T ? SLB_VSID_B_1T : 0);
+ << slb_vsid_shift(ssize)) | SLB_VSID_USER;
break;
case VMALLOC_REGION_ID:
pr_devel("copro_data_segment: 0x%llx -- VMALLOC_REGION_ID\n",
ea);
@@ -116,16 +115,16 @@ int copro_data_segment(struct mm_struct *mm, u64 ea, u64
*esid, u64 *vsid)
psize = mmu_vmalloc_psize;
else
psize = mmu_io_psize;
+ ssize = mmu_kernel_ssize;
*vsid = (get_kernel_vsid(ea, mmu_kernel_ssize)
- << SLB_VSID_SHIFT) | SLB_VSID_KERNEL
- | (mmu_kernel_ssize == MMU_SEGSIZE_1T ? SLB_VSID_B_1T :
0);
+ << SLB_VSID_SHIFT) | SLB_VSID_KERNEL;
break;
case KERNEL_REGION_ID:
pr_devel("copro_data_segment: 0x%llx -- KERNEL_REGION_ID\n",
ea);
psize = mmu_linear_psize;
+ ssize = mmu_kernel_ssize;
*vsid = (get_kernel_vsid(ea, mmu_kernel_ssize)
- << SLB_VSID_SHIFT) | SLB_VSID_KERNEL
- | (mmu_kernel_ssize == MMU_SEGSIZE_1T ? SLB_VSID_B_1T :
0);
+ << SLB_VSID_SHIFT) | SLB_VSID_KERNEL;
break;
default:
/* Future: support kernel segments so that drivers can use the
@@ -133,7 +132,8 @@ int copro_data_segment(struct mm_struct *mm, u64 ea, u64
*esid, u64 *vsid)
pr_debug("invalid region access at %016llx\n", ea);
return 1;
}
- *vsid |= mmu_psize_defs[psize].sllp;
+ *vsid |= mmu_psize_defs[psize].sllp |
+ (ssize == MMU_SEGSIZE_1T) ? SLB_VSID_B_1T : 0;
return 0;
}
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
