On Wed, Jul 09, 2014 at 09:54:11AM +0530, Priyanka Jain wrote:
> diff --git a/arch/powerpc/boot/dts/t104xrdb.dtsi
> b/arch/powerpc/boot/dts/t104xrdb.dtsi
> index 9aaefa5..e7e765f 100644
> --- a/arch/powerpc/boot/dts/t104xrdb.dtsi
> +++ b/arch/powerpc/boot/dts/t104xrdb.dtsi
> @@ -57,7 +57,8 @@
> };
>
> cpld@3,0 {
> - compatible = "fsl,t1040rdb-cpld","fsl,t1042rdb-cpld";
> + compatible = "fsl,t1040rdb-cpld","fsl,t1042rdb-cpld",
> + "fsl,t1042rdb_pi-cpld";
> reg = <3 0 0x300>;
> };
> };
What's going on here? This file is used by all three boards. If you
need to distinguish one board's CPLD from another's, you'll have to do it
somewhere else. If the CPLDs are exactly the same and no distinction
needs to be made, then you don't need three compatible strings. Even
then, you may wish to specify the exact board as the first compatible
string, but again you'll need to patch that in elsewhere so that it
actually matches the board.
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
