Hi Varka,
On Fri, Jul 25, 2014 at 09:54:43AM +0530, Varka Bhadram wrote:
> On 07/25/2014 09:33 AM, Nicolin Chen wrote:
> >The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
> >signal associated with an input clock into a signal associated with a
> >different
> >output clock. The driver currently works as a Front End of DPCM with other
> >Back
> >Ends DAI links such as ESAI<->CS42888 and SSI<->WM8962 and SAI. It converts
> >the
> >original sample rate to a common rate supported by Back Ends for playback
> >while
> >converts the common rate of Back Ends to a desired rate for capture. It has 3
> >pairs to support three different substreams within totally 10 channels.
> >
> (...)
>
> >+Required properties:
> >+
> >+ - compatible : Compatible list, must contain "fsl,imx35-asrc" or
> >+ "fsl,imx53-asrc".
> >+
> >+ - reg : Offset and length of the register set for the device.
> >+
> >+ - interrupts : Contains the spdif interrupt.
> >+
> >+ - dmas : Generic dma devicetree binding as described in
> >+ Documentation/devicetree/bindings/dma/dma.txt.
> >+
> >+ - dma-names : Six dmas have to be defined: "rxa", "rxb", "rxc", "txa",
> >"txb",
> >+ and "txc".
> >+
> >+ - clocks : Contains an entry for each entry in clock-names.
> >+
> >+ - clock-names : Includes the following entries:
> >+ "mem" Peripheral access clock to access registers.
> >+ "ipg" Peripheral clock to driver module.
> >+ "asrck_<0-f>" Clock sources for input and output clock.
> >+
> >+ - big-endian : If this property is absent, the native endian mode will
> >+ be in use as default, or the big endian mode will be in use
> >+ for all the device registers.
> >+
> >+ - fsl,asrc-rate : Defines a mutual sample rate used by Back End DAI link.
> >+
> >+ - fsl,asrc-width : Defines a mutual sample width used by Back End DAI
> >link.
> >+
>
> indentation for the properties....
>
> - compatible : Should be "fsl,imx35-asrc" or "fsl,imx53-asrc".
> - reg : Offset and length of the register set for the device.
> ....
>
> (...)
>
> >+
> >+static const struct platform_device_id fsl_asrc_devtype[] = {
> >+ {
> >+ .name = "imx35-asrc",
> >+ .driver_data = IMX35_ASRC,
> >+ }, {
> >+ .name = "imx53-asrc",
> >+ .driver_data = IMX53_ASRC,
> >+ }, {
> >+ /* sentinel */
> >+ }
> >+};
> >+MODULE_DEVICE_TABLE(platform, fsl_asrc_devtype);
> >+
> >+static const struct of_device_id fsl_asrc_ids[] = {
> >+ {
> >+ .compatible = "fsl,imx35-asrc",
> >+ .data = &fsl_asrc_devtype[IMX35_ASRC],
> >+ }, {
> >+ .compatible = "fsl,imx53-asrc",
> >+ .data = &fsl_asrc_devtype[IMX53_ASRC],
> >+ }, {
> >+ /* sentinel */
> >+ }
> >+};
> >+MODULE_DEVICE_TABLE(of, fsl_asrc_ids);
> >+
>
> move these ids after probe/remove... every driver follows same thing...
>
> >+static irqreturn_t fsl_asrc_isr(int irq, void *dev_id)
> >+{
> >+ struct fsl_asrc *asrc_priv = (struct fsl_asrc *)dev_id;
> >+ struct device *dev = &asrc_priv->pdev->dev;
> >+ enum asrc_pair_index index;
> >+ u32 status;
> >+
> >+ regmap_read(asrc_priv->regmap, REG_ASRSTR, &status);
> >+
> >+ /* Clean overload error */
> >+ regmap_write(asrc_priv->regmap, REG_ASRSTR, ASRSTR_AOLE);
> >+
> >+ /*
> >+ * We here use dev_dbg() for all exceptions because ASRC itself does
> >+ * not care if FIFO overflowed or underrun while a warning in the
> >+ * interrupt would result a ridged conversion.
> >+ */
> >+ for (index = ASRC_PAIR_A; index < ASRC_PAIR_MAX_NUM; index++) {
> >+ if (!asrc_priv->pair[index])
> >+ continue;
> >+
> >+ if (status & ASRSTR_ATQOL) {
> >+ asrc_priv->pair[index]->error |= ASRC_TASK_Q_OVERLOAD;
> >+ dev_dbg(dev, "ASRC Task Queue FIFO overload");
>
> missed terminating new line (\n)...
>
> >+ }
> >+
> >+ if (status & ASRSTR_AOOL(index)) {
> >+ asrc_priv->pair[index]->error |=
> >ASRC_OUTPUT_TASK_OVERLOAD;
> >+ pair_dbg("Output Task Overload");
>
> same
>
> >+ }
> >+
> >+ if (status & ASRSTR_AIOL(index)) {
> >+ asrc_priv->pair[index]->error |=
> >ASRC_INPUT_TASK_OVERLOAD;
> >+ pair_dbg("Input Task Overload");
>
> same
>
> >+ }
> >+
> >+ if (status & ASRSTR_AODO(index)) {
> >+ asrc_priv->pair[index]->error |=
> >ASRC_OUTPUT_BUFFER_OVERFLOW;
> >+ pair_dbg("Output Data Buffer has overflowed");
>
> same
>
> >+ }
> >+
> >+ if (status & ASRSTR_AIDU(index)) {
> >+ asrc_priv->pair[index]->error |=
> >ASRC_INPUT_BUFFER_UNDERRUN;
> >+ pair_dbg("Input Data Buffer has underflowed");
>
> same..
>
> >+ }
> >+ }
> >+
> >+ return IRQ_HANDLED;
> >+}
> >+
>
> (...)
>
> >+/**
> >+ * Configure input and output thresholds
> >+ */
> >+static int fsl_asrc_set_watermarks(struct fsl_asrc_pair *pair, u32 in, u32
> >out)
> >+{
>
> static void for function..?
>
> >+ struct fsl_asrc *asrc_priv = pair->asrc_priv;
> >+ enum asrc_pair_index index = pair->index;
> >+
> >+ regmap_update_bits(asrc_priv->regmap, REG_ASRMCR(index),
> >+ ASRMCRi_EXTTHRSHi_MASK |
> >+ ASRMCRi_INFIFO_THRESHOLD_MASK |
> >+ ASRMCRi_OUTFIFO_THRESHOLD_MASK,
> >+ ASRMCRi_EXTTHRSHi |
> >+ ASRMCRi_INFIFO_THRESHOLD(in) |
> >+ ASRMCRi_OUTFIFO_THRESHOLD(out));
> >+
> >+ return 0;
> >+}
>
> (...)
>
> >+static const struct dev_pm_ops fsl_asrc_pm = {
> >+ SET_RUNTIME_PM_OPS(fsl_asrc_runtime_suspend, fsl_asrc_runtime_resume,
> >NULL)
> >+ SET_SYSTEM_SLEEP_PM_OPS(fsl_asrc_suspend, fsl_asrc_resume)
> >+};
> >+
>
> move device ids to here...
I'll fix them all in v4.
Thank you,
Nicolin
---
>
> >+static struct platform_driver fsl_asrc_driver = {
> >+ .probe = fsl_asrc_probe,
> >+ .driver = {
> >+ .name = "fsl-asrc",
> >+ .of_match_table = fsl_asrc_ids,
> >+ .pm = &fsl_asrc_pm,
> >+ },
> >+};
> >+module_platform_driver(fsl_asrc_driver);
>
> Thanks...
>
> --
> Regards,
> Varka Bhadram.
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
