On 06/26/2014 08:12 AM, Gavin Shan wrote:
On Wed, Jun 25, 2014 at 03:27:55PM +0800, Mike Qiu wrote:
On 06/25/2014 01:33 PM, Gavin Shan wrote:
On Tue, Jun 24, 2014 at 11:32:07PM -0400, Mike Qiu wrote:
[ cc Richard ]
Eeh sysfs entry created must be after EEH_ENABLED been set
in eeh_subsystem_flags.
In PowerNV platform, it try to create sysfs entry before
EEH_ENABLED been set, when boot up. So nothing will be
created for eeh in sysfs.
Could you please make the commit log more clear? :-)
I guess the issue is introduced by commit 2213fb1 ("
powerpc/eeh: Skip eeh sysfs when eeh is disabled"). The
commit checks EEH is enabled while creating PCI device
EEH sysfs files. If not, the sysfs files won't be created.
That's to avoid warning reported during PCI hotplug.
The problem you're reporting (if I understand completely):
You don't see the sysfs files after the system boots up.
If it's the case, you probably need following changes in
arch/powerpc/platforms/powernv/pci.c::pnv_pci_ioda_fixup().
Could you have a try with it?
#ifdef CONFIG_EEH
eeh_probe_mode_set(EEH_PROBE_MODE_DEV);
- eeh_addr_cache_build();
eeh_init();
+ eeh_addr_cache_build();
#endif
But this was not work, as I test, see boot log below:
Yeah, we can't convert eeh_dev to pci_dev that time. The
association is populated by eeh_addr_cache_build(). The
attached patch should fix your issue. I tried on P7 machine
and sysfs entries created. Could you help having a test
on your machine? :-)
I have tested, works good.
Thanks
Mike
Thanks,
Gavin
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
