On 04/02/2014 12:32 PM, Anshuman Khandual wrote: > This patch series adds new ELF note sections which are used to > create new ptrace request macros for various transactional memory and > miscellaneous registers on PowerPC. Please find the test case exploiting > the new ptrace request macros and it's results on a POWER8 system. > > RFC: https://lkml.org/lkml/2014/4/1/292 > > ============================== Results ============================== > -------TM specific SPR------ > TM TFHAR: 100009dc > TM TEXASR: de000001ac000001 > TM TFIAR: c00000000003f386 > TM CH ORIG_MSR: 900000050000f032 > TM CH TAR: 6 > TM CH PPR: c000000000000 > TM CH DSCR: 1 > -------TM checkpointed GPR----- > TM CH GPR[0]: 1000097c > TM CH GPR[1]: 5 > TM CH GPR[2]: 6 > TM CH GPR[7]: 1 > TM CH NIP: 100009dc > TM CH LINK: 1000097c > TM CH CCR: 22000422 > -------TM running GPR----- > TM RN GPR[0]: 1000097c > TM RN GPR[1]: 7 > TM RN GPR[2]: 8 > TM RN GPR[7]: 5 > TM RN NIP: 100009fc > TM RN LINK: 1000097c > TM RN CCR: 2000422 > -------TM running FPR----- > TM RN FPR[0]: 1002d3a3780 > TM RN FPR[1]: 7 > TM RN FPR[2]: 8 > TM RN FPSCR: 0 > -------TM checkpointed FPR----- > TM CH FPR[0]: 1002d3a3780 > TM CH FPR[1]: 5 > TM CH FPR[2]: 6 > TM CH FPSCR: 0 > -------Running miscellaneous registers------- TM RN DSCR: 0
There is a problem in here which I forgot to mention. The running DSCR value comes from thread->dscr component of the target process. While we are inside the transaction (which is the case here as we are stuck at "b ." instruction and have not reached TEND) thread->dscr should have the running value of the DSCR register at that point of time. Here we expect the DSCR value to be 5 instead of 0 as shown in the output above. During the tests when I moved the "b ." after TEND, the thread->dscr gets the value of 5 while all check pointed reg values are thrown away. I believe there is some problem in the way thread->dscr context is saved away inside the TM section. Will look into this problem further and keep informed. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev