All our cpu feature updates were done for every CPU in the device-tree,
thus overwriting the cputable bits over and over again. Instead do them
only for the boot CPU.
Signed-off-by: Benjamin Herrenschmidt <b...@kernel.crashing.org>
---
arch/powerpc/kernel/prom.c | 52 +++++++++++++++++++++++-----------------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index f1002b1..7270ca1 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -346,33 +346,34 @@ static int __init early_init_dt_scan_cpus(unsigned long
node,
#endif
}
- if (found >= 0) {
- DBG("boot cpu: logical %d physical %d\n", found,
- be32_to_cpu(intserv[found_thread]));
- boot_cpuid = found;
- set_hard_smp_processor_id(found,
- be32_to_cpu(intserv[found_thread]));
+ /* Not the boot CPU */
+ if (found < 0)
+ return 0;
- /*
- * PAPR defines "logical" PVR values for cpus that
- * meet various levels of the architecture:
- * 0x0f000001 Architecture version 2.04
- * 0x0f000002 Architecture version 2.05
- * If the cpu-version property in the cpu node contains
- * such a value, we call identify_cpu again with the
- * logical PVR value in order to use the cpu feature
- * bits appropriate for the architecture level.
- *
- * A POWER6 partition in "POWER6 architected" mode
- * uses the 0x0f000002 PVR value; in POWER5+ mode
- * it uses 0x0f000001.
- */
- prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
- if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
- identify_cpu(0, be32_to_cpup(prop));
+ DBG("boot cpu: logical %d physical %d\n", found,
+ be32_to_cpu(intserv[found_thread]));
+ boot_cpuid = found;
+ set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread]));
- identical_pvr_fixup(node);
- }
+ /*
+ * PAPR defines "logical" PVR values for cpus that
+ * meet various levels of the architecture:
+ * 0x0f000001 Architecture version 2.04
+ * 0x0f000002 Architecture version 2.05
+ * If the cpu-version property in the cpu node contains
+ * such a value, we call identify_cpu again with the
+ * logical PVR value in order to use the cpu feature
+ * bits appropriate for the architecture level.
+ *
+ * A POWER6 partition in "POWER6 architected" mode
+ * uses the 0x0f000002 PVR value; in POWER5+ mode
+ * it uses 0x0f000001.
+ */
+ prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
+ if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
+ identify_cpu(0, be32_to_cpup(prop));
+
+ identical_pvr_fixup(node);
check_cpu_feature_properties(node);
check_cpu_pa_features(node);
@@ -384,7 +385,6 @@ static int __init early_init_dt_scan_cpus(unsigned long
node,
else
cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
#endif
-
return 0;
}
--
1.8.3.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
