To specify spi flash layouts by "mtdparts=..." in cmdline, we must
give mtd_info a fixed name,because the cmdlinepart's parser will
match the name of mtd_info given in cmdline.
Now, if use DT, the mtd_info's name will be spi->dev->name. It
consists of spi_master->bus_num, and the spi_master->bus_num maybe
dynamically fetched. So, in this case, replace the component bus_num
with thei physical address of spi master.
Signed-off-by: Hou Zhiqiang <b48...@freescale.com>
---
drivers/mtd/devices/m25p80.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 7eda71d..64450a2 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -30,6 +30,7 @@
#include <linux/mtd/cfi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/spi/spi.h>
@@ -934,9 +935,11 @@ static int m25p_probe(struct spi_device *spi)
struct flash_platform_data *data;
struct m25p *flash;
struct flash_info *info;
- unsigned i;
+ unsigned i, ret;
struct mtd_part_parser_data ppdata;
struct device_node *np = spi->dev.of_node;
+ struct resource res;
+ struct device_node *mnp = spi->master->dev.of_node;
/* Platform data helps sort out which chip type we have, as
* well as how this board partitions it. If we don't have
@@ -1009,8 +1012,17 @@ static int m25p_probe(struct spi_device *spi)
if (data && data->name)
flash->mtd.name = data->name;
- else
- flash->mtd.name = dev_name(&spi->dev);
+ else{
+ ret = of_address_to_resource(mnp, 0, &res);
+ if (ret) {
+ dev_err(&spi->dev, "failed to get spi master
resource\n");
+ return ret;
+ }
+ flash->mtd.name = kasprintf(GFP_KERNEL, "spi%x.%d",
+ (unsigned)res.start, spi->chip_select);
+ if (!flash->mtd.name)
+ return -ENOMEM;
+ }
flash->mtd.type = MTD_NORFLASH;
flash->mtd.writesize = 1;
--
1.8.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
