On Tue, Jan 07, 2014 at 04:04:08PM +0800, Dongsheng Wang wrote: > From: Wang Dongsheng <dongsheng.w...@freescale.com> > > The new suspend/resume implementation, send pme turnoff message > in suspend, and send pme exit message in resume. > > Add a PME handler, to response PME & message interrupt. > > Change platform_driver->suspend/resume to syscore->suspend/resume. > pci-driver will call back EP device, to save EP state in > pci_pm_suspend_noirq, so we need to keep the link, until > pci_pm_suspend_noirq finish. > > Signed-off-by: Wang Dongsheng <dongsheng.w...@freescale.com>
Is this patch OK to go in without patch 1/2? It's not clear whether that was deemed incorrect (as in new patch coming) or unnecessary. It would also be good if you submit with the explanation from http://www.spinics.net/lists/linux-pci/msg27844.html in the commit message. > -static int fsl_pci_probe(struct platform_device *pdev) > +#ifdef CONFIG_PM > +static irqreturn_t fsl_pci_pme_handle(int irq, void *dev_id) > { > - int ret; > - struct device_node *node; > + struct pci_controller *hose = dev_id; > + struct ccsr_pci __iomem *pci = hose->private_data; > + u32 dr; > > - node = pdev->dev.of_node; > - ret = fsl_add_bridge(pdev, fsl_pci_primary == node); > + dr = in_be32(&pci->pex_pme_mes_dr); > + if (dr) > + out_be32(&pci->pex_pme_mes_dr, dr); > + else > + return IRQ_NONE; > > - mpc85xx_pci_err_probe(pdev); > + return IRQ_HANDLED; > +} Why do you put some of the HANDLED path in the if statement, and some outside? Just do: if (!dr) return IRQ_NONE; out_be32(...); return IRQ_HANDLED; > +static int fsl_pci_pme_probe(struct pci_controller *hose) > +{ > + struct ccsr_pci __iomem *pci; > + struct pci_dev *dev = hose->bus->self; > + u16 pms; > + int pme_irq; > + int res; > + > + /* PME Disable */ > + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms); > + pms &= ~PCI_PM_CTRL_PME_ENABLE; > + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms); > + > + pme_irq = irq_of_parse_and_map(hose->dn, 0); > + if (!pme_irq) { > + pr_warn("Failed to map PME interrupt.\n"); dev_err() > + > + return -ENXIO; > + } > + > + res = devm_request_irq(hose->parent, pme_irq, > + fsl_pci_pme_handle, > + IRQF_DISABLED | IRQF_SHARED, > + "[PCI] PME", hose); IRQF_DISABLED is a deprecated no-op. > + if (res < 0) { > + pr_warn("Unable to requiest irq %d for PME\n", pme_irq); dev_err() etc. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
