after the UART and SPI peripheral drivers have switched to device tree
based clock lookup and no longer construct clock names from their PSC
component index, the "psc%d_mclk" alias names have become obsolete --
remove the corresponding clk_register_clkdev() calls

after the UART and SPI peripheral drivers acquire the 'ipg' clock item,
the platform's clock driver need no longer pre-enable it

Signed-off-by: Gerhard Sittig <g...@denx.de>
---
 arch/powerpc/platforms/512x/clock-commonclk.c |   13 -------------
 1 file changed, 13 deletions(-)

diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c 
b/arch/powerpc/platforms/512x/clock-commonclk.c
index 3f559fe..bd704b3 100644
--- a/arch/powerpc/platforms/512x/clock-commonclk.c
+++ b/arch/powerpc/platforms/512x/clock-commonclk.c
@@ -500,17 +500,6 @@ static void mpc512x_clk_setup_mclk(struct mclk_setup_data 
*entry, size_t idx)
                                entry->parent_names_mux1[0],
                                1, 1);
        }
-
-       /*
-        * without this "clock device" registration, "simple" lookups in
-        * the SPI master initialization and serial port setup will fail
-        *
-        * those drivers need to get adjusted to lookup their required
-        * clocks from device tree specs, and device tree nodes need to
-        * provide the clock specs, before this clkdev registration
-        * becomes obsolete
-        */
-       clk_register_clkdev(clks[clks_idx_pub], entry->name_mclk, NULL);
 }
 
 static void mpc512x_clk_setup_clock_tree(int busfreq)
@@ -686,8 +675,6 @@ static void mpc512x_clk_setup_clock_tree(int busfreq)
        /* some are not yet acquired by their respective drivers */
        clk_prepare_enable(clks[MPC512x_CLK_PSC3_MCLK]);/* serial console */
        clk_prepare_enable(clks[MPC512x_CLK_DIU]);      /* display */
-       for (mclk_idx = 0; mclk_idx < ARRAY_SIZE(mclk_psc_data); mclk_idx++)
-               clk_prepare_enable(clks[MPC512x_CLK_PSC0 + mclk_idx]);
        clk_prepare_enable(clks[MPC512x_CLK_BDLC]);
        for (mclk_idx = 0; mclk_idx < ARRAY_SIZE(mclk_mscan_data); mclk_idx++)
                clk_prepare_enable(clks[MPC512x_CLK_MSCAN0_MCLK + mclk_idx]);
-- 
1.7.10.4

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to