This reworks the Facility Status and Control Regsiter (FSCR) config bit definitions so that we can access the bit numbers. This will be useful when looking at the status in the facility unavailable interrupt.
HFSCR and FSCR versions are the same, so reuse them. Signed-off-by: Michael Neuling <mi...@neuling.org> --- arch/powerpc/include/asm/reg.h | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index a6840e4..75199581 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -254,19 +254,28 @@ #define SPRN_HRMOR 0x139 /* Real mode offset register */ #define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */ #define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */ +/* HFSCR and FSCR bit numbers are the same */ +#define FSCR_TAR_LG 8 /* Enable Target Address Register */ +#define FSCR_EBB_LG 7 /* Enable Event Based Branching */ +#define FSCR_TM_LG 6 /* Enable Transactional Memory */ +#define FSCR_PM_LG 5 /* Enable prob/priv access to PMU SPRs */ +#define FSCR_BHRB_LG 4 /* Enable Branch History Rolling Buffer*/ +#define FSCR_DSCR_LG 2 /* Enable Data Stream Control Register */ +#define FSCR_VECVSX_LG 1 /* Enable VMX/VSX */ +#define FSCR_FP_LG 0 /* Enable Floating Point */ #define SPRN_FSCR 0x099 /* Facility Status & Control Register */ -#define FSCR_TAR (1 << (63-55)) /* Enable Target Address Register */ -#define FSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */ -#define FSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */ +#define FSCR_TAR __MASK(FSCR_TAR_LG) +#define FSCR_EBB __MASK(FSCR_EBB_LG) +#define FSCR_DSCR __MASK(FSCR_DSCR_LG) #define SPRN_HFSCR 0xbe /* HV=1 Facility Status & Control Register */ -#define HFSCR_TAR (1 << (63-55)) /* Enable Target Address Register */ -#define HFSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */ -#define HFSCR_TM (1 << (63-58)) /* Enable Transactional Memory */ -#define HFSCR_PM (1 << (63-60)) /* Enable prob/priv access to PMU SPRs */ -#define HFSCR_BHRB (1 << (63-59)) /* Enable Branch History Rolling Buffer*/ -#define HFSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */ -#define HFSCR_VECVSX (1 << (63-62)) /* Enable VMX/VSX */ -#define HFSCR_FP (1 << (63-63)) /* Enable Floating Point */ +#define HFSCR_TAR __MASK(FSCR_TAR_LG) +#define HFSCR_EBB __MASK(FSCR_EBB_LG) +#define HFSCR_TM __MASK(FSCR_TM_LG) +#define HFSCR_PM __MASK(FSCR_PM_LG) +#define HFSCR_BHRB __MASK(FSCR_BHRB_LG) +#define HFSCR_DSCR __MASK(FSCR_DSCR_LG) +#define HFSCR_VECVSX __MASK(FSCR_VECVSX_LG) +#define HFSCR_FP __MASK(FSCR_FP_LG) #define SPRN_TAR 0x32f /* Target Address Register */ #define SPRN_LPCR 0x13E /* LPAR Control Register */ #define LPCR_VPM0 (1ul << (63-0)) -- 1.8.1.2 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
