Signed-off-by: Shaveta Leekha <shav...@freescale.com>
---
.../devicetree/bindings/powerpc/fsl/maple.txt | 30 ++++++++++++++++++++
1 files changed, 30 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/maple.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/maple.txt
b/Documentation/devicetree/bindings/powerpc/fsl/maple.txt
new file mode 100644
index 0000000..da51c5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/maple.txt
@@ -0,0 +1,30 @@
+* Freescale MAPLE Multi Accelerator Platform Engine Baseband 3
+ (MAPLE-B3)device nodes
+
+Supported chips:
+Example: B4860
+
+Required properties:
+
+- compatible: Should contain "fsl,maple-b3-liodn" as the value
+ This identifies Multi Accelerator Platform Engine
+ Baseband 3 block.This representation is required
+ for doing the PAMU/LIODN programming on the Linux side.
+
+- reg: offset and length of the register set for the device
+
+Devices that have LIODNs need to specify links to the parent PAMU controller
+(the actual PAMU controller that this device is connected to) and a pointer to
+the LIODN register, if applicable.
+
+- fsl,iommu-parent
+ : <phandle>
+ This property should be present
+
+Example:
+ /* B4860 */
+ maple@800000 {
+ compatible = "fsl,maple-b3-liodn";
+ reg = <0x8000000 0x10000>;
+ fsl,iommu-parent = <&pamu1>;
+ };
--
1.7.6.GIT
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
