On Fri, 2013-05-31 at 12:48 +0100, Grant Likely wrote:
> On Fri, 31 May 2013 11:29:30 +0100, Ian Campbell <ian.campb...@citrix.com> 
> wrote:
> > This affects arch/powerpc/boot/dts/virtex440-ml510.dts but I think it is
> > actually a more general issue:
> > 
> >         $ make ARCH=powerpc CROSS_COMPILE=powerpc-linux- 
> > virtex440-ml510.dtb 
> >           CC      scripts/mod/devicetable-offsets.s
> >           GEN     scripts/mod/devicetable-offsets.h
> >           HOSTCC  scripts/mod/file2alias.o
> >           HOSTLD  scripts/mod/modpost
> >           DTC     arch/powerpc/boot/virtex440-ml510.dtb
> >         Error: arch/powerpc/boot/dts/virtex440-ml510.dts:374.6-7 syntax 
> > error
> >         FATAL ERROR: Unable to parse input tree
> >         make[1]: *** [arch/powerpc/boot/virtex440-ml510.dtb] Error 1
> >         make: *** [virtex440-ml510.dtb] Error 2
> >         
> > Line 374 is the "IDSEL 0x16..." line here:
> >                     interrupt-map = <
> >                             /* IRQ mapping for pci slots and ALI M1533
> >                              ...
> >                              * management core also isn't used.
> >                              */
> > 
> >                             /* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
> >                             0x3000 0 0 1 &xps_intc_0 3 2
> >                             0x3000 0 0 2 &xps_intc_0 2 2
> >                             0x3000 0 0 3 &xps_intc_0 5 2
> >                             0x3000 0 0 4 &xps_intc_0 4 2
> > 
> > Which gets preprocessed into:
> >            interrupt-map = <
> >         # 375 "arch/powerpc/boot/dts/virtex440-ml510.dts"
> >             0x3000 0 0 1 &xps_intc_0 3 2
> >             0x3000 0 0 2 &xps_intc_0 2 2
> >             0x3000 0 0 3 &xps_intc_0 5 2
> >             0x3000 0 0 4 &xps_intc_0 4 2
> > 
> > If I manually remove the "# 375 " line then that fixes the error
> > (although there is then a subsequent one of the same type).
> > 
> > I suppose this is a bug in dtc? It appears to have at least some
> > awareness of these preprocessor line number comments since it manages to
> > report the original source line number.
> 
> dtc is only able to track line numbers when the native /include/
> directive is used. The #include directive doesn't help it. It should be
> added, but until it is the following patch solves the problem:
> 
> I've got this patch in my tree. Either Rob or I will push it to Linus in
> the next few days.

Thanks, I'll do something similar in my device-tree.git tree.

Ian


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to