This patch removes the Kconfig symbols HAVE_CAN_FLEXCAN and
IMX_HAVE_PLATFORM_FLEXCAN from arch/{arm,powerpc} and allowing compilation on
all arm and powerpc platforms.
This brings a bigger compile time coverage and removes the following dependency
warning found by Arnd Bergmann:
warning: (SOC_IMX28 && SOC_IMX25 && SOC_IMX35 && IMX_HAVE_PLATFORM_FLEXCAN
&&
SOC_IMX53 && SOC_IMX6Q) selects HAVE_CAN_FLEXCAN
which has unmet direct dependencies (NET && CAN && CAN_DEV)
Cc: Arnd Bergmann <a...@arndb.de>
Cc: Shawn Guo <shawn....@linaro.org>
Cc: Sascha Hauer <s.ha...@pengutronix.de>
Cc: Kumar Gala <ga...@kernel.crashing.org>
Cc: U Bhaskar-B22300 <b22...@freescale.com>
Cc: linux-arm-ker...@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de>
---
Hello,
if the arm and powerpc people are okay with this, I'm taking this patch (and
then will go upstream via David Miller's net-next).
regards,
Marc
arch/arm/mach-imx/Kconfig | 8 --------
arch/arm/mach-imx/devices/Kconfig | 4 ----
arch/arm/mach-mxs/Kconfig | 1 -
arch/powerpc/Kconfig | 1 -
drivers/net/can/Kconfig | 5 +----
5 files changed, 1 insertion(+), 18 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ba44328..239d084 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -111,7 +111,6 @@ config SOC_IMX25
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_ARM926T
- select HAVE_CAN_FLEXCAN if CAN
select MXC_AVIC
config SOC_IMX27
@@ -137,7 +136,6 @@ config SOC_IMX35
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_V6K
- select HAVE_CAN_FLEXCAN if CAN
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
@@ -208,7 +206,6 @@ comment "MX25 platforms:"
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
- select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
@@ -223,7 +220,6 @@ config MACH_MX25_3DS
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
- select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
@@ -629,7 +625,6 @@ comment "MX35 platforms:"
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
- select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
@@ -665,7 +660,6 @@ config MACH_MX35_3DS
config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
- select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
@@ -776,7 +770,6 @@ comment "Device tree only"
config SOC_IMX53
bool "i.MX53 support"
- select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_SRC
select IMX_HAVE_PLATFORM_IMX2_WDT
select PINCTRL
@@ -799,7 +792,6 @@ config SOC_IMX6Q
select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if LOCAL_TIMERS
- select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
diff --git a/arch/arm/mach-imx/devices/Kconfig
b/arch/arm/mach-imx/devices/Kconfig
index 3dd2b1b..b0a629d 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -2,10 +2,6 @@ config IMX_HAVE_PLATFORM_FEC
bool
default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 ||
SOC_IMX53
-config IMX_HAVE_PLATFORM_FLEXCAN
- bool
- select HAVE_CAN_FLEXCAN if CAN
-
config IMX_HAVE_PLATFORM_FSL_USB2_UDC
bool
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4dc2fbb..ce6e7d6 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -11,7 +11,6 @@ config SOC_IMX28
select ARM_AMBA
select ARM_CPU_SUSPEND if PM
select CPU_ARM926T
- select HAVE_CAN_FLEXCAN if CAN
select HAVE_PWM
select PINCTRL_IMX28
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c33e3ad..7754c6b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -674,7 +674,6 @@ config SBUS
config FSL_SOC
bool
- select HAVE_CAN_FLEXCAN if NET && CAN
config FSL_PCI
bool
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index e456b70..3c06947 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -102,12 +102,9 @@ config CAN_JANZ_ICAN3
This driver can also be built as a module. If so, the module will be
called janz-ican3.ko.
-config HAVE_CAN_FLEXCAN
- bool
-
config CAN_FLEXCAN
tristate "Support for Freescale FLEXCAN based chips"
- depends on HAVE_CAN_FLEXCAN
+ depends on ARM || PPC
---help---
Say Y here if you want to support for Freescale FlexCAN.
--
1.8.2.rc2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
