commit 761bbcb7, "usb: ehci-fsl: set INCR8 mode for system bus interface
on MPC512x", introduced to fix one MPC5121e (M36P) Errata by setting
INCR8 mode for system bus interface on MPC512x, but we should make sure
this is only valid for MPC512x like other parts of this commit. Otherwise
this would issue other platforms as abnormal without this similar Errata.
Signed-off-by: Tiejun Chen <tiejun.c...@windriver.com>
---
drivers/usb/host/ehci-fsl.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index d81d2fc..f4f2a7b 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -509,7 +509,15 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
- ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
+ if (of_device_is_compatible(dev->parent->of_node,
+ "fsl,mpc5121-usb2-dr")) {
+ /*
+ * set SBUSCFG:AHBBRST so that control msgs don't
+ * fail when doing heavy PATA writes.
+ */
+ ehci_writel(ehci, SBUSCFG_INCR8,
+ hcd->regs + FSL_SOC_USB_SBUSCFG);
+ }
/* restore EHCI registers */
ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
--
1.7.9.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
