Add irq_set_wake support. Just add IRQF_NO_SUSPEND to desc->action->flag.
So the wake up interrupt will not be disable in suspend_device_irqs.
Signed-off-by: Wang Dongsheng <dongsheng.w...@freescale.com>
---
v2:
* Add: Check freescale chip in mpic_irq_set_wake().
* Remove: Support mpic_irq_set_wake() in ht_chip.
arch/powerpc/sysdev/mpic.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 3b2efd4..50d1ee1 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -920,6 +920,22 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int
flow_type)
return IRQ_SET_MASK_OK_NOCOPY;
}
+static int mpic_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);
+ struct mpic *mpic = mpic_from_irq_data(d);
+
+ if (!(mpic->flags & MPIC_FSL))
+ return -EINVAL;
+
+ if (on)
+ desc->action->flags |= IRQF_NO_SUSPEND;
+ else
+ desc->action->flags &= ~IRQF_NO_SUSPEND;
+
+ return 0;
+}
+
void mpic_set_vector(unsigned int virq, unsigned int vector)
{
struct mpic *mpic = mpic_from_irq(virq);
@@ -957,6 +973,7 @@ static struct irq_chip mpic_irq_chip = {
.irq_unmask = mpic_unmask_irq,
.irq_eoi = mpic_end_irq,
.irq_set_type = mpic_set_irq_type,
+ .irq_set_wake = mpic_irq_set_wake,
};
#ifdef CONFIG_SMP
@@ -971,6 +988,7 @@ static struct irq_chip mpic_tm_chip = {
.irq_mask = mpic_mask_tm,
.irq_unmask = mpic_unmask_tm,
.irq_eoi = mpic_end_irq,
+ .irq_set_wake = mpic_irq_set_wake,
};
#ifdef CONFIG_MPIC_U3_HT_IRQS
--
1.8.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
