On Wed, Mar 27, 2013 at 11:47 AM, Paul Bolle <pebo...@tiscali.nl> wrote:
> 3) I removed two files in documentation that are almost entirely PReP
> specific. The remaining lines looked uninteresting.
> --- a/Documentation/powerpc/sound.txt
> +++ /dev/null
> -2. IBM CHRP
> -
> - I have only tested this on the 43P-150. Build the kernel with the cs4232
> - set as a module and load the module with irq=9 dma=1 dma2=2 io=0x550
This section is CHRP-specific. The cs4232 driver also worked on the
CHRP LongTrail.
But I don't remember if the parameter values above also applied to LongTrail.
I do remember it didn't work without specifing the right parameters, so you
probably want to keep this section.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
