On Mar 7, 2013, at 1:58 PM, Kumar Gala wrote: > Enable a baseline T4240 SoC to boot. There are several things missing > from the device trees for T4240: > > * Proper PAMU topology information > * DPAA related nodes (Qman, Bman, Fman, Rman, DCE) > * Prefetch Manager > * Thermal monitor unit > * Interlaken > > Signed-off-by: Roy Zang <tie-fei.z...@freescale.com> > Signed-off-by: Minghuan Lian <minghuan.l...@freescale.com> > Signed-off-by: Haiying Wang <haiying.w...@freescale.com> > Signed-off-by: Andy Fleming <aflem...@freescale.com> > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > Signed-off-by: York Sun <york...@freescale.com> > Signed-off-by: Vakul Garg <va...@freescale.com> > Signed-off-by: Tang Yuantian <yuantian.t...@freescale.com> > Signed-off-by: Zhao Chenhui <chenhui.z...@freescale.com> > Signed-off-by: Li Yang <le...@freescale.com> > Signed-off-by: Ramneek Mehresh <ramneek.mehr...@freescale.com> > Signed-off-by: Laurentiu Tudor <laurentiu.tu...@freescale.com> > Signed-off-by: Kumar Gala <ga...@kernel.crashing.org> > --- > * Added thread ids to cpu nodes > * removed clock-frequency from PCI nodes as we dont use it > > arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi | 41 ++++ > arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi | 41 ++++ > arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi | 41 ++++ > arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 307 +++++++++++++++++++++++++++ > arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi | 127 +++++++++++ > 5 files changed, 557 insertions(+) > create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi > create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi > create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi > create mode 100644 arch/powerpc/boot/dts/fsl/t4240si-post.dtsi > create mode 100644 arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
applied to next - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
