> -----Original Message-----
> From: Linuxppc-dev [mailto:linuxppc-dev-
> bounces+bharat.bhushan=freescale....@lists.ozlabs.org] On Behalf Of Stefan
> Roese
> Sent: Tuesday, February 12, 2013 2:38 PM
> To: net...@vger.kernel.org
> Cc: linuxppc-...@ozlabs.org; Anatolij Gustschin
> Subject: [PATCH v2] net: fec_mpc52xx: Read MAC address from device-tree
>
> Until now, the MPC5200 FEC ethernet driver relied upon the bootloader
> (U-Boot) to write the MAC address into the ethernet controller registers. The
> Linux driver should not rely on such a thing. So lets read the MAC address
> from
> the DT as it should be done here.
>
> The following priority is now used to read the MAC address:
>
> 1) First, try OF node MAC address, if not present or invalid, then:
>
> 2) Read from MAC address registers, if invalid, then:
Why we read from MAC registers if Linux should not rely on bootloader?
-Bharat
>
> 3) Log a warning message, and choose a random MAC address.
>
> This fixes a problem with a MPC5200 board that uses the SPL U-Boot version
> without FEC initialization before Linux booting for boot speedup.
>
> Additionally a status line is now be printed upon successful driver probing,
> also displaying this MAC address.
>
> Signed-off-by: Stefan Roese <s...@denx.de>
> Cc: Anatolij Gustschin <ag...@denx.de>
> ---
> v2:
> - Remove module parameter mpc52xx_fec_mac_addr
> - Priority for MAC address probing now is DT, controller regs
> If the resulting MAC address is invalid, a random address will
> be generated and used with a warning message
> - Use "np" variable to simplify the code
>
> drivers/net/ethernet/freescale/fec_mpc52xx.c | 61
> +++++++++++++++++-----------
> 1 file changed, 37 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c
> b/drivers/net/ethernet/freescale/fec_mpc52xx.c
> index 817d081..8b725f4 100644
> --- a/drivers/net/ethernet/freescale/fec_mpc52xx.c
> +++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c
> @@ -76,10 +76,6 @@ static void mpc52xx_fec_stop(struct net_device *dev);
> static
> void mpc52xx_fec_start(struct net_device *dev); static void
> mpc52xx_fec_reset(struct net_device *dev);
>
> -static u8 mpc52xx_fec_mac_addr[6];
> -module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0); -
> MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe");
> -
> #define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \
> NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP)
> static int debug = -1; /* the above default */
> @@ -110,15 +106,6 @@ static void mpc52xx_fec_set_paddr(struct net_device *dev,
> u8 *mac)
> out_be32(&fec->paddr2, (*(u16 *)(&mac[4]) << 16) | FEC_PADDR2_TYPE); }
>
> -static void mpc52xx_fec_get_paddr(struct net_device *dev, u8 *mac) -{
> - struct mpc52xx_fec_priv *priv = netdev_priv(dev);
> - struct mpc52xx_fec __iomem *fec = priv->fec;
> -
> - *(u32 *)(&mac[0]) = in_be32(&fec->paddr1);
> - *(u16 *)(&mac[4]) = in_be32(&fec->paddr2) >> 16;
> -}
> -
> static int mpc52xx_fec_set_mac_address(struct net_device *dev, void *addr) {
> struct sockaddr *sock = addr;
> @@ -853,6 +840,8 @@ static int mpc52xx_fec_probe(struct platform_device *op)
> struct resource mem;
> const u32 *prop;
> int prop_size;
> + struct device_node *np = op->dev.of_node;
> + const void *p;
>
> phys_addr_t rx_fifo;
> phys_addr_t tx_fifo;
> @@ -866,7 +855,7 @@ static int mpc52xx_fec_probe(struct platform_device *op)
> priv->ndev = ndev;
>
> /* Reserve FEC control zone */
> - rv = of_address_to_resource(op->dev.of_node, 0, &mem);
> + rv = of_address_to_resource(np, 0, &mem);
> if (rv) {
> printk(KERN_ERR DRIVER_NAME ": "
> "Error while parsing device node resource\n" );
> @@ -
> 919,7 +908,7 @@ static int mpc52xx_fec_probe(struct platform_device *op)
>
> /* Get the IRQ we need one by one */
> /* Control */
> - ndev->irq = irq_of_parse_and_map(op->dev.of_node, 0);
> + ndev->irq = irq_of_parse_and_map(np, 0);
>
> /* RX */
> priv->r_irq = bcom_get_task_irq(priv->rx_dmatsk);
> @@ -927,11 +916,33 @@ static int mpc52xx_fec_probe(struct platform_device *op)
> /* TX */
> priv->t_irq = bcom_get_task_irq(priv->tx_dmatsk);
>
> - /* MAC address init */
> - if (!is_zero_ether_addr(mpc52xx_fec_mac_addr))
> - memcpy(ndev->dev_addr, mpc52xx_fec_mac_addr, 6);
> - else
> - mpc52xx_fec_get_paddr(ndev, ndev->dev_addr);
> + /*
> + * MAC address init:
> + *
> + * First try to read MAC address from DT
> + */
> + p = of_get_property(np, "local-mac-address", NULL);
> + if (p != NULL) {
> + memcpy(ndev->dev_addr, p, 6);
> + } else {
> + struct mpc52xx_fec __iomem *fec = priv->fec;
> +
> + /*
> + * If the MAC addresse is not provided via DT then read
> + * it back from the controller regs
> + */
> + *(u32 *)(&ndev->dev_addr[0]) = in_be32(&fec->paddr1);
> + *(u16 *)(&ndev->dev_addr[4]) = in_be32(&fec->paddr2) >> 16;
> + }
> +
> + /*
> + * Check if the MAC address is valid, if not get a random one
> + */
> + if (!is_valid_ether_addr(ndev->dev_addr)) {
> + eth_hw_addr_random(ndev);
> + dev_warn(&ndev->dev, "using random MAC address %pM\n",
> + ndev->dev_addr);
> + }
>
> priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT);
>
> @@ -942,20 +953,20 @@ static int mpc52xx_fec_probe(struct platform_device *op)
> /* Start with safe defaults for link connection */
> priv->speed = 100;
> priv->duplex = DUPLEX_HALF;
> - priv->mdio_speed = ((mpc5xxx_get_bus_frequency(op->dev.of_node) >> 20) /
> 5) << 1;
> + priv->mdio_speed = ((mpc5xxx_get_bus_frequency(np) >> 20) / 5) << 1;
>
> /* The current speed preconfigures the speed of the MII link */
> - prop = of_get_property(op->dev.of_node, "current-speed", &prop_size);
> + prop = of_get_property(np, "current-speed", &prop_size);
> if (prop && (prop_size >= sizeof(u32) * 2)) {
> priv->speed = prop[0];
> priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
> }
>
> /* If there is a phy handle, then get the PHY node */
> - priv->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
> + priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
>
> /* the 7-wire property means don't use MII mode */
> - if (of_find_property(op->dev.of_node, "fsl,7-wire-mode", NULL)) {
> + if (of_find_property(np, "fsl,7-wire-mode", NULL)) {
> priv->seven_wire_mode = 1;
> dev_info(&ndev->dev, "using 7-wire PHY mode\n");
> }
> @@ -970,6 +981,8 @@ static int mpc52xx_fec_probe(struct platform_device *op)
>
> /* We're done ! */
> dev_set_drvdata(&op->dev, ndev);
> + printk(KERN_INFO "%s: %s MAC %pM\n",
> + ndev->name, op->dev.of_node->full_name, ndev->dev_addr);
>
> return 0;
>
> --
> 1.8.1.3
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
