Hello All,
I am trying to port 3.6 linux kernel on ml510 board and i
have already ported 3.6 kernel on ml403 board but i am unable to do the
same thing on ml510. I really don't know what i am missing here.
Tools used :
1) xilinx 13.1 edk
2) linux kernel from git.xilinx.com (downloaded 3.6 kernel)
3) eldk 5.3 (cross compilers tools)
Flow go's like this :
1) I have added necessary peripherals in the edk and generated bit stream
and exported it to sdk. In sdk i have creted a .dts file.
2) The obtained dts file i have placed in arch/powerpc/boot/dts folder
3) i also got ramdisk image from wiki.xilinx.com/powerpc-linux. (placed in
/arch/powerpc/boot)
compiled kernel using default configuration. i have also enabled soft fpu's
After compiling i got .elf file in arch/powerpc/boot . i took that elf and
download.bit in edk project and clubbed it in xmd console inorder to get
.ace file .
obtained .ace file is loaded in CF and trying to port through rs232, but i
am seeing nothing on the console. what to do.... what i am missing here. I
am breaking my head from past 1 month. Please do reply.
With Regards,
Rakesh.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
