Hi,
On Fri, Jan 11, 2013 at 05:56:28PM +0800, Peter Chen wrote:
> It changes the driver to use platform_device_id rather than cpu_is_xxx
> to determine the SoC type, and updates the platform code accordingly.
>
> Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable.
> Tested at mx51 bbg board, it works ok after enable phy clock
> (Need another patch to fix this problem)
>
> Signed-off-by: Peter Chen <peter.c...@freescale.com>
> ---
> arch/arm/mach-imx/clk-imx25.c | 6 +-
> arch/arm/mach-imx/clk-imx27.c | 6 +-
> arch/arm/mach-imx/clk-imx31.c | 6 +-
> arch/arm/mach-imx/clk-imx35.c | 6 +-
> arch/arm/mach-imx/clk-imx51-imx53.c | 6 +-
> arch/arm/mach-imx/devices/devices-common.h | 1 +
> arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c | 15 +++---
> drivers/usb/gadget/fsl_mxc_udc.c | 17 +++----
> drivers/usb/gadget/fsl_udc_core.c | 52 +++++++++++++-------
> drivers/usb/gadget/fsl_usb2_udc.h | 13 ++++--
> include/linux/fsl_devices.h | 8 +++
> 11 files changed, 82 insertions(+), 54 deletions(-)
>
> diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
> index b197aa7..67e353d 100644
> --- a/arch/arm/mach-imx/clk-imx25.c
> +++ b/arch/arm/mach-imx/clk-imx25.c
> @@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
> clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
> clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
> clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
> - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
> - clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
> - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
> + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx25");
> + clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx25");
> + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx25");
> clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
> /* i.mx25 has the i.mx35 type cspi */
> clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
> diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
> index 4c1d1e4..1ffe3b5 100644
> --- a/arch/arm/mach-imx/clk-imx27.c
> +++ b/arch/arm/mach-imx/clk-imx27.c
> @@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
> clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
> clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
> clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
> - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
> - clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
> - clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
> + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
> + clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
> + clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
> clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
> clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
> clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
> diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
> index 8be64e0..ef66eaf 100644
> --- a/arch/arm/mach-imx/clk-imx31.c
> +++ b/arch/arm/mach-imx/clk-imx31.c
> @@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
> clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
> clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
> clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
> - clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
> - clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
> - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
> + clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx31");
> + clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx31");
> + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx31");
> clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
> /* i.mx31 has the i.mx21 type uart */
> clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
> diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
> index 66f3d65..69fe9c8 100644
> --- a/arch/arm/mach-imx/clk-imx35.c
> +++ b/arch/arm/mach-imx/clk-imx35.c
> @@ -251,9 +251,9 @@ int __init mx35_clocks_init()
> clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
> clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
> clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
> - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
> - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
> - clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
> + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx35");
> + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx35");
> + clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx35");
> clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
> clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
> clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
> diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c
> b/arch/arm/mach-imx/clk-imx51-imx53.c
> index 579023f..fb7cb84 100644
> --- a/arch/arm/mach-imx/clk-imx51-imx53.c
> +++ b/arch/arm/mach-imx/clk-imx51-imx53.c
> @@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long
> rate_ckil,
> clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
> clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
> clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
> - clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
> - clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
> - clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
> + clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
> + clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
> + clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
> clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
> clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
> clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
> diff --git a/arch/arm/mach-imx/devices/devices-common.h
> b/arch/arm/mach-imx/devices/devices-common.h
> index 6277baf..9bd5777 100644
> --- a/arch/arm/mach-imx/devices/devices-common.h
> +++ b/arch/arm/mach-imx/devices/devices-common.h
> @@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
>
> #include <linux/fsl_devices.h>
> struct imx_fsl_usb2_udc_data {
> + const char *devid;
> resource_size_t iobase;
> resource_size_t irq;
> };
> diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
> b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
> index 37e4439..fb527c7 100644
> --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
> +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
> @@ -11,35 +11,36 @@
> #include "../hardware.h"
> #include "devices-common.h"
>
> -#define imx_fsl_usb2_udc_data_entry_single(soc)
> \
> +#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)
> \
> { \
> + .devid = _devid, \
> .iobase = soc ## _USB_OTG_BASE_ADDR, \
> .irq = soc ## _INT_USB_OTG, \
> }
>
> #ifdef CONFIG_SOC_IMX25
> const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
> - imx_fsl_usb2_udc_data_entry_single(MX25);
> + imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx25");
> #endif /* ifdef CONFIG_SOC_IMX25 */
>
> #ifdef CONFIG_SOC_IMX27
> const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
> - imx_fsl_usb2_udc_data_entry_single(MX27);
> + imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
> #endif /* ifdef CONFIG_SOC_IMX27 */
>
> #ifdef CONFIG_SOC_IMX31
> const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
> - imx_fsl_usb2_udc_data_entry_single(MX31);
> + imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx31");
> #endif /* ifdef CONFIG_SOC_IMX31 */
>
> #ifdef CONFIG_SOC_IMX35
> const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
> - imx_fsl_usb2_udc_data_entry_single(MX35);
> + imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx35");
> #endif /* ifdef CONFIG_SOC_IMX35 */
>
> #ifdef CONFIG_SOC_IMX51
> const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
> - imx_fsl_usb2_udc_data_entry_single(MX51);
> + imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
> #endif
>
> struct platform_device *__init imx_add_fsl_usb2_udc(
> @@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
> .flags = IORESOURCE_IRQ,
> },
> };
> - return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
> + return imx_add_platform_device_dmamask(data->devid, -1,
> res, ARRAY_SIZE(res),
> pdata, sizeof(*pdata), DMA_BIT_MASK(32));
> }
> diff --git a/drivers/usb/gadget/fsl_mxc_udc.c
> b/drivers/usb/gadget/fsl_mxc_udc.c
> index 1b0f086..f313085 100644
> --- a/drivers/usb/gadget/fsl_mxc_udc.c
> +++ b/drivers/usb/gadget/fsl_mxc_udc.c
> @@ -18,8 +18,6 @@
> #include <linux/platform_device.h>
> #include <linux/io.h>
>
> -#include <mach/hardware.h>
> -
> static struct clk *mxc_ahb_clk;
> static struct clk *mxc_per_clk;
> static struct clk *mxc_ipg_clk;
> @@ -28,7 +26,7 @@ static struct clk *mxc_ipg_clk;
> #define USBPHYCTRL_OTGBASE_OFFSET 0x608
> #define USBPHYCTRL_EVDO (1 << 23)
>
> -int fsl_udc_clk_init(struct platform_device *pdev)
> +int fsl_udc_clk_init(enum fsl_udc_type devtype, struct platform_device *pdev)
> {
> struct fsl_usb2_platform_data *pdata;
> unsigned long freq;
> @@ -59,7 +57,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
> clk_prepare_enable(mxc_per_clk);
>
> /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
> - if (!cpu_is_mx51()) {
> + if (!(devtype == IMX51_UDC)) {
> freq = clk_get_rate(mxc_per_clk);
> if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
> (freq < 59999000 || freq > 60001000)) {
> @@ -79,19 +77,18 @@ eclkrate:
> return ret;
> }
>
> -void fsl_udc_clk_finalize(struct platform_device *pdev)
> +void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
> + struct platform_device *pdev)
> {
> struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
> - if (cpu_is_mx35()) {
> + if (devtype == IMX35_UDC) {
> unsigned int v;
>
> /* workaround ENGcm09152 for i.MX35 */
> if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
> - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
> - USBPHYCTRL_OTGBASE_OFFSET));
> + v = readl(pdata->regs + USBPHYCTRL_OTGBASE_OFFSET);
> writel(v | USBPHYCTRL_EVDO,
> - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
> - USBPHYCTRL_OTGBASE_OFFSET));
> + pdata->regs + USBPHYCTRL_OTGBASE_OFFSET);
> }
> }
>
> diff --git a/drivers/usb/gadget/fsl_udc_core.c
> b/drivers/usb/gadget/fsl_udc_core.c
> index c19f7f1..9f9005b 100644
> --- a/drivers/usb/gadget/fsl_udc_core.c
> +++ b/drivers/usb/gadget/fsl_udc_core.c
> @@ -41,6 +41,7 @@
> #include <linux/fsl_devices.h>
> #include <linux/dmapool.h>
> #include <linux/delay.h>
> +#include <linux/of_device.h>
>
> #include <asm/byteorder.h>
> #include <asm/io.h>
> @@ -2438,17 +2439,13 @@ static int __init fsl_udc_probe(struct
> platform_device *pdev)
> unsigned int i;
> u32 dccparams;
>
> - if (strcmp(pdev->name, driver_name)) {
> - VDBG("Wrong device");
> - return -ENODEV;
> - }
> -
> udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
> if (udc_controller == NULL) {
> ERR("malloc udc failed\n");
> return -ENOMEM;
> }
>
> + udc_controller->devtype = pdev->id_entry->driver_data;
> pdata = pdev->dev.platform_data;
> udc_controller->pdata = pdata;
> spin_lock_init(&udc_controller->lock);
> @@ -2505,7 +2502,7 @@ static int __init fsl_udc_probe(struct platform_device
> *pdev)
> #endif
>
> /* Initialize USB clocks */
> - ret = fsl_udc_clk_init(pdev);
> + ret = fsl_udc_clk_init(udc_controller->devtype, pdev);
> if (ret < 0)
> goto err_iounmap_noclk;
>
> @@ -2547,7 +2544,7 @@ static int __init fsl_udc_probe(struct platform_device
> *pdev)
> dr_controller_setup(udc_controller);
> }
>
> - fsl_udc_clk_finalize(pdev);
> + fsl_udc_clk_finalize(udc_controller->devtype, pdev);
>
> /* Setup gadget structure */
> udc_controller->gadget.ops = &fsl_gadget_ops;
> @@ -2756,22 +2753,41 @@ static int fsl_udc_otg_resume(struct device *dev)
>
> return fsl_udc_resume(NULL);
> }
> -
> /*-------------------------------------------------------------------------
> Register entry point for the peripheral controller driver
> --------------------------------------------------------------------------*/
> -
> +static struct platform_device_id fsl_udc_devtype[] = {
should be const
> + {
> + .name = "imx-udc-mx25",
> + .driver_data = IMX25_UDC,
> + }, {
> + .name = "imx-udc-mx27",
> + .driver_data = IMX27_UDC,
> + }, {
> + .name = "imx-udc-mx31",
> + .driver_data = IMX31_UDC,
> + }, {
> + .name = "imx-udc-mx35",
> + .driver_data = IMX35_UDC,
> + }, {
> + .name = "imx-udc-mx51",
> + .driver_data = IMX51_UDC,
> + }
> +};
> +MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
> static struct platform_driver udc_driver = {
> - .remove = __exit_p(fsl_udc_remove),
> + .remove = __exit_p(fsl_udc_remove),
> + /* Just for FSL i.mx SoC currently */
> + .id_table = fsl_udc_devtype,
> /* these suspend and resume are not usb suspend and resume */
> - .suspend = fsl_udc_suspend,
> - .resume = fsl_udc_resume,
> - .driver = {
> - .name = (char *)driver_name,
> - .owner = THIS_MODULE,
> - /* udc suspend/resume called from OTG driver */
> - .suspend = fsl_udc_otg_suspend,
> - .resume = fsl_udc_otg_resume,
> + .suspend = fsl_udc_suspend,
> + .resume = fsl_udc_resume,
> + .driver = {
> + .name = (char *)driver_name,
> + .owner = THIS_MODULE,
> + /* udc suspend/resume called from OTG driver */
> + .suspend = fsl_udc_otg_suspend,
> + .resume = fsl_udc_otg_resume,
> },
> };
>
> diff --git a/drivers/usb/gadget/fsl_usb2_udc.h
> b/drivers/usb/gadget/fsl_usb2_udc.h
> index f61a967..bc1f6d0 100644
> --- a/drivers/usb/gadget/fsl_usb2_udc.h
> +++ b/drivers/usb/gadget/fsl_usb2_udc.h
> @@ -505,6 +505,8 @@ struct fsl_udc {
> u32 ep0_dir; /* Endpoint zero direction: can be
> USB_DIR_IN or USB_DIR_OUT */
> u8 device_address; /* Device USB address */
> + /* devtype for kinds of SoC, only i.mx uses it now */
> + enum fsl_udc_type devtype;
to me this looks wrong as it will grow forever. Are you sure you don't
have a way to detect the revision in runtime ?
BTW, it looks to me that, in order to remove cpu_is_*() from that
driver, all you have to do is:
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 1b0f086..f06102d 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -18,8 +18,6 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-
static struct clk *mxc_ahb_clk;
static struct clk *mxc_per_clk;
static struct clk *mxc_ipg_clk;
@@ -59,14 +57,12 @@ int fsl_udc_clk_init(struct platform_device *pdev)
clk_prepare_enable(mxc_per_clk);
/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
- if (!cpu_is_mx51()) {
- freq = clk_get_rate(mxc_per_clk);
- if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
- (freq < 59999000 || freq > 60001000)) {
- dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n",
freq);
- ret = -EINVAL;
- goto eclkrate;
- }
+ freq = clk_get_rate(mxc_per_clk);
+ if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
+ (freq < 59999000 || freq > 60001000)) {
+ dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+ ret = -EINVAL;
+ goto eclkrate;
}
return 0;
@@ -82,17 +78,15 @@ eclkrate:
void fsl_udc_clk_finalize(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
- if (cpu_is_mx35()) {
- unsigned int v;
+ unsigned int v;
- /* workaround ENGcm09152 for i.MX35 */
- if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
- v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
+ /* workaround ENGcm09152 for i.MX35 */
+ if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
+ v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
USBPHYCTRL_OTGBASE_OFFSET));
- writel(v | USBPHYCTRL_EVDO,
+ writel(v | USBPHYCTRL_EVDO,
MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
USBPHYCTRL_OTGBASE_OFFSET));
- }
}
/* ULPI transceivers don't need usbpll */
The only problem is that you're accessing PHY address space directly
without even ioremap() it first, not to mention that PHY address space
should only be accessed by a PHY (drivers/usb/phy) driver.
All of these details are all fixed in chipidea. More and more I consider
just deleting this driver and forcing you guys to use chipidea.
That whole MX35_IO_ADDRESS() is really wrong. It shouldn't be used
outside of arch/mach-imx/, that's why it sits in a mach/ header.
As I said before, this patch is too big for -rc and is unnecessary
considering patch I wrote above. Note that there is no problems in
checking if ULPI PHY clk is 60MHz on all arches and, for the workaround,
you already have a runtime check.
Shawn, it can be broken down into smaller pieces because you can *FIX
THE COMPILE BREAKAGE* with a very small patch as above (only issue now
is usage of MX32_IO_ADDRESS()).
--
balbi
signature.asc
Description: Digital signature
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
