> This is expected since you didn't add sub-nodes for your i2c devices
> 24c32a and PCF8563 in the i2c adapter node.
Ok this was the issue.
>> Is there something wrong with my dtb file or is it a bug in the mpc-i2c
>> driver
>
> It is an issue with our dtb file. Please look at the I2C eeprom
> sub-node in the arch/powerpc/boot/dts/mpc5121ads.dts file and at
> the pcf8563 RTC sub-node in the arch/powerpc/boot/dts/mucmc52.dts
> file for an example how to add needed nodes for your devices.
According to the two examples, I added the subnodes to both i2c nodes.
Now I can see the rtc clock and the eeproms in /sys/..
# root@generic-powerpc:/sys/bus/i2c/devices# ls
# 0-0050 1-0050 1-0051 i2c-0 i2c-1
Now the i2c section in my dtb file looks as follows:
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x00>;
interrupts = <2 15 0>;
eeprom@50 {
compatible = "at,24c32";
reg = <0x50>;
};
};
i2c@3d40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
eeprom@50 {
compatible = "at,24c32";
reg = <0x50>;
};
rtc@51 {
compatible = "pcf8563";
reg = <0x51>;
};
};
The good thing is that I can see all the devices now. Also the driver
for the rtc clock is loading. But the time can`t be read through the
registered rtc0 device. This is the kernel log. But I think this is a
driver issue and I should have a look inside the driver.
[ 1.483761] rtc-pcf8563 1-0051: chip found, driver version 0.4.3
[ 1.490382] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[ 1.497478] rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0
...
...
[ 1.536540] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
[ 1.542759] rtc-pcf8563 1-0051: hctosys: unable to read the hardware clock
Thanks,
Johannes
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
