On Fri, Dec 28, 2012 at 05:13:19PM -0200, Thadeu Lima de Souza Cascardo wrote:
>The DDW code uses a eeh_dev struct from the pci_dev. However, this is
>not set until eeh_add_device_late is called.
>
>Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
>devices are added to the bus, making drivers' probe hooks to be called.
>These will call set_dma_mask, which will call the DDW code, which will
>require the eeh_dev struct from pci_dev. This would result in a crash,
>due to a NULL dereference.
>
>Calling eeh_add_device_late after pci_bus_add_devices would make the
>system BUG, because device files shouldn't be added to devices there
>were not added to the system. So, a new function is needed to add such
>files only after pci_bus_add_devices have been called.
>
Thanks, Cascardo. The change looks good to me :-)
Acked-by: Gavin Shan <sha...@linux.vnet.ibm.com>
>Cc: sta...@vger.kernel.org
>Signed-off-by: Thadeu Lima de Souza Cascardo <casca...@linux.vnet.ibm.com>
>---
> arch/powerpc/include/asm/eeh.h | 3 +++
> arch/powerpc/kernel/of_platform.c | 3 +++
> arch/powerpc/kernel/pci-common.c | 7 +++++--
> arch/powerpc/platforms/pseries/eeh.c | 24 +++++++++++++++++++++++-
> 4 files changed, 34 insertions(+), 3 deletions(-)
>
>diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
>index b0ef738..0f816da 100644
>--- a/arch/powerpc/include/asm/eeh.h
>+++ b/arch/powerpc/include/asm/eeh.h
>@@ -201,6 +201,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev);
> void __init eeh_addr_cache_build(void);
> void eeh_add_device_tree_early(struct device_node *);
> void eeh_add_device_tree_late(struct pci_bus *);
>+void eeh_add_sysfs_files(struct pci_bus *);
> void eeh_remove_bus_device(struct pci_dev *, int);
>
> /**
>@@ -240,6 +241,8 @@ static inline void eeh_add_device_tree_early(struct
>device_node *dn) { }
>
> static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
>
>+static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
>+
> static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) {
> }
>
> static inline void eeh_lock(void) { }
>diff --git a/arch/powerpc/kernel/of_platform.c
>b/arch/powerpc/kernel/of_platform.c
>index c5fc6b2..500dd32 100644
>--- a/arch/powerpc/kernel/of_platform.c
>+++ b/arch/powerpc/kernel/of_platform.c
>@@ -91,6 +91,9 @@ static int __devinit of_pci_phb_probe(struct platform_device
>*dev)
> /* Add probed PCI devices to the device model */
> pci_bus_add_devices(phb->bus);
>
>+ /* sysfs files should only be added after devices are added */
>+ eeh_add_sysfs_files(phb->bus);
>+
> return 0;
> }
>
>diff --git a/arch/powerpc/kernel/pci-common.c
>b/arch/powerpc/kernel/pci-common.c
>index 7f94f76..4d3de7e 100644
>--- a/arch/powerpc/kernel/pci-common.c
>+++ b/arch/powerpc/kernel/pci-common.c
>@@ -1480,11 +1480,14 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
> pcibios_allocate_bus_resources(bus);
> pcibios_claim_one_bus(bus);
>
>+ /* Fixup EEH */
>+ eeh_add_device_tree_late(bus);
>+
> /* Add new devices to global lists. Register in proc, sysfs. */
> pci_bus_add_devices(bus);
>
>- /* Fixup EEH */
>- eeh_add_device_tree_late(bus);
>+ /* sysfs files should only be added after devices are added */
>+ eeh_add_sysfs_files(bus);
> }
> EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
>
>diff --git a/arch/powerpc/platforms/pseries/eeh.c
>b/arch/powerpc/platforms/pseries/eeh.c
>index 9a04322..6b73d6c 100644
>--- a/arch/powerpc/platforms/pseries/eeh.c
>+++ b/arch/powerpc/platforms/pseries/eeh.c
>@@ -788,7 +788,6 @@ static void eeh_add_device_late(struct pci_dev *dev)
> dev->dev.archdata.edev = edev;
>
> eeh_addr_cache_insert_dev(dev);
>- eeh_sysfs_add_device(dev);
> }
>
> /**
>@@ -815,6 +814,29 @@ void eeh_add_device_tree_late(struct pci_bus *bus)
> EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
>
> /**
>+ * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
>+ * @bus: PCI bus
>+ *
>+ * This routine must be used to add EEH sysfs files for PCI
>+ * devices which are attached to the indicated PCI bus. The PCI bus
>+ * is added after system boot through hotplug or dlpar.
>+ */
>+void eeh_add_sysfs_files(struct pci_bus *bus)
>+{
>+ struct pci_dev *dev;
>+
>+ list_for_each_entry(dev, &bus->devices, bus_list) {
>+ eeh_sysfs_add_device(dev);
>+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
>+ struct pci_bus *subbus = dev->subordinate;
>+ if (subbus)
>+ eeh_add_sysfs_files(subbus);
>+ }
>+ }
>+}
>+EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
>+
>+/**
> * eeh_remove_device - Undo EEH setup for the indicated pci device
> * @dev: pci device to be removed
> * @purge_pe: remove the PE or not
>
Thanks,
Gavin
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
