On 12/18/2012 10:57 AM, Wolfgang Grandegger wrote: > On 12/18/2012 10:44 AM, Johannes Braun wrote: >> Hello, >> >> I hope someone could help me with my problem. Currently I am porting >> a new kernel (3.3.8) for a tqm5200s based board. > > This is not really a new kernel. > >> The previous kernel was 2.6.23. The new kernel version is needed because >> of support for a wireless card. >> >> The new kernel has problems with my ethernet PHY. The problem occurs only >> with our hardware. Not with the TQ eval board. >> The eval board uses a Intel PHY. Our board uses a Marvel 88E6085 PHY. > > Is it a PHY or a switch? If is a switch you need to configure a fixed > link to the switch. This can be done via dts file.
Here is an example: http://lxr.linux.no/#linux+v3.7.1/arch/powerpc/boot/dts/charon.dts#L129 > Note the the DSA also supports this chip. See http://lwn.net/Articles/302333/. But I think it lacks device tree support. Wolfgang. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
