Add the missing usb controller version info and port0, which is
required during setup usb phy.
Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com>
---
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 8d35d2c..4f9c9f6 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -345,6 +345,13 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
+ usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph",
"fsl-usb2-mph";
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
+ usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr",
"fsl-usb2-dr";
+ };
/include/ "qoriq-sec4.0-0.dtsi"
};
--
1.6.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
