Hello, 

A gentle reminder!
Any comments are appreciated.


Regards,
Shengzhou


> -----Original Message-----
> From: Liu Shengzhou-B36685
> Sent: Wednesday, July 18, 2012 2:07 PM
> To: bhelg...@google.com; linux-...@vger.kernel.org
> Cc: linuxppc-dev@lists.ozlabs.org; Liu Shengzhou-B36685
> Subject: [PATCH v2] PCI: use dev->irq instead of dev->pin to enable non
> MSI/INTx interrupt
> 
> On some platforms, root port has neither MSI/MSI-X nor INTx interrupt
> generated in RC mode. In this case, we have to use other interrupt(e.g.
> system shared interrupt) for port service irq to have AER, Hot-plug, etc,
> services to work.
> 
> Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com>
> ---
>  drivers/pci/pcie/portdrv_core.c |   16 ++++++++++++----
>  1 files changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
> index 75915b3..49acf72 100644
> --- a/drivers/pci/pcie/portdrv_core.c
> +++ b/drivers/pci/pcie/portdrv_core.c
> @@ -200,10 +200,13 @@ static int init_service_irqs(struct pci_dev *dev, int
> *irqs, int mask)  {
>       int i, irq = -1;
> 
> -     /* We have to use INTx if MSI cannot be used for PCIe PME or pciehp. */
> +     /*
> +      * We have to use INTx or other interrupts(e.g. system shared interrupt)
> +      * if MSI cannot be used for PCIe PME or pciehp.
> +      */
>       if (((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) ||
>           ((mask & PCIE_PORT_SERVICE_HP) && pciehp_no_msi())) {
> -             if (dev->pin)
> +             if (dev->irq)
>                       irq = dev->irq;
>               goto no_msi;
>       }
> @@ -212,8 +215,13 @@ static int init_service_irqs(struct pci_dev *dev, int
> *irqs, int mask)
>       if (!pcie_port_enable_msix(dev, irqs, mask))
>               return 0;
> 
> -     /* We're not going to use MSI-X, so try MSI and fall back to INTx */
> -     if (!pci_enable_msi(dev) || dev->pin)
> +     /*
> +      * We're not going to use MSI-X, so try MSI and fall back to INTx.
> +      * If neither MSI/MSI-X nor INTx available, try other interrupt. (On
> +      * some platforms, root port doesn't support generating MSI/MSI-X/INTx
> +      * in RC mode)
> +      */
> +     if (!pci_enable_msi(dev) || dev->irq)
>               irq = dev->irq;
> 
>   no_msi:
> --
> 1.6.4


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to