Hi Cedric MAUSSIRE, P2020RDB-PCA Board gets supported since kernel 3.3 in mainline code. Are you sure the board works on kernel 2.6.35?
Regards, Yuantian From: linuxppc-dev-bounces+b29983=freescale....@lists.ozlabs.org [mailto:linuxppc-dev-bounces+b29983=freescale....@lists.ozlabs.org] On Behalf Of MAUSSIRE Cedric Sent: 2012年6月4日 23:06 To: linuxppc-dev@lists.ozlabs.org Subject: Cannot boot an kernel version other than 2.6.35 on P2020RDB-PCA Hello all, I am currently working on the Freescale P2020RDB-PCA Board, which has been delivred with the linux-2.6.35 kernel. I succeed in re-generating my own uImage in 2.6.35 thanks to ELDK, but when I want to move on to a newer or older version of linux, the system does not respond any longer just after the boot whith the nfsboot command, the logs are : ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux-2.6.39 Created: 2012-05-29 8:24:54 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 3514882 Bytes = 3.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00c00000 Booting using the fdt blob at 0xc00000 Uncompressing Kernel Image ... OK Loading Device Tree to 00ffa000, end 00fffd4a ... OK NB : nfsboot=setenv bootargs root=/dev/nfs rw nfsroot=192.168.1.1:$rootpath ip=192.168.1.2:192.168.1.1:192.168.1.1:255.255.255.0:P2020RDB-PC:eth0:off console=ttyS0,115200 I have unsuccessfully tried to rebuild the device tree blob and use the default kernel configuration "mpc85xx_defconfig" that comes with the mainline code. My systems seems to be linux-2.6.35 dependent, I do not known how it can be possible, because I can use the kernel.org source of the 2.6.35 whith no problems but when I use the 3.0, for example, with the same configuration but it does not work. Best regards, Cedric MAUSSIRE
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
