pcibios_setup_bus_devices which sets DMA and IRQs of PCI device is called
only when boot, so DMA and IRQs of PCI device will not set when hotplug.
This patch adds pcibios_device_change_notifier which sets DMA and IRQs of
PCI device when PCI device adds, so DMA and IRQs of PCI device will be set
when boot and hotplug.
* Not patched pciehp message on powerpc platform
# echo 1 > /sys/bus/pci/slots/1/power
<snip>
pcieport 0000:02:01.0: PCI bridge to [bus 03-03]
pcieport 0000:02:01.0: bridge window [io 0xff7ee000-0xff7eefff]
pcieport 0000:02:01.0: bridge window [mem 0xa0100000-0xa01fffff]
pcieport 0000:02:01.0: bridge window [mem 0xa0200000-0xa02fffff 64bit pref]
pci 0000:03:00.0: no hotplug settings from platform
e1000e 0000:03:00.0: Disabling ASPM L1
e1000e 0000:03:00.0: enabling device (0000 -> 0002)
e1000e 0000:03:00.0: No usable DMA configuration, aborting
e1000e: probe of 0000:03:00.0 failed with error -5
* Patched pciehp message on powerpc platform
# echo 1 > /sys/bus/pci/slots/1/power
<snip>
pcieport 0000:02:01.0: PCI bridge to [bus 03-03]
pcieport 0000:02:01.0: bridge window [io 0xff7ee000-0xff7eefff]
pcieport 0000:02:01.0: bridge window [mem 0xa0100000-0xa01fffff]
pcieport 0000:02:01.0: bridge window [mem 0xa0200000-0xa02fffff 64bit pref]
pci 0000:03:00.0: no hotplug settings from platform
e1000e 0000:03:00.0: Disabling ASPM L1
e1000e 0000:03:00.0: enabling device (0000 -> 0002)
irq: irq 6 on host /soc@ffe00000/msi@41600 mapped to virtual irq 27
e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:15:17:bf:c0:c9
e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0: eth0: MAC: 1, PHY: 4, PBA No: D50861-003
Signed-off-by: Hiroo MATSUMOTO <matsumoto.hi...@jp.fujitsu.com>
---
arch/powerpc/include/asm/pci.h | 2 +-
arch/powerpc/kernel/pci-common.c | 87 ++++++++++++++--------------
arch/powerpc/kernel/pci_32.c | 2 +
arch/powerpc/kernel/pci_64.c | 2 +
arch/powerpc/kernel/pci_of_scan.c | 1 -
arch/powerpc/platforms/pseries/pci_dlpar.c | 1 -
drivers/pci/pci.c | 5 --
drivers/pcmcia/cardbus.c | 3 +-
include/linux/pci.h | 3 -
9 files changed, 49 insertions(+), 57 deletions(-)
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index f54b3d2..7b4ca5a 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -190,10 +190,10 @@ extern void pci_resource_to_user(const struct pci_dev
*dev, int bar,
const struct resource *rsrc,
resource_size_t *start, resource_size_t *end);
-extern void pcibios_setup_bus_devices(struct pci_bus *bus);
extern void pcibios_setup_bus_self(struct pci_bus *bus);
extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
extern void pcibios_scan_phb(struct pci_controller *hose);
+extern void pcibios_setup_bus_notifier(void);
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index cce98d7..42a00b5 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1097,40 +1097,6 @@ void __devinit pcibios_setup_bus_self(struct pci_bus
*bus)
ppc_md.pci_dma_bus_setup(bus);
}
-void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- pr_debug("PCI: Fixup bus devices %d (%s)\n",
- bus->number, bus->self ? pci_name(bus->self) : "PHB");
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- /* Cardbus can call us to add new devices to a bus, so ignore
- * those who are already fully discovered
- */
- if (dev->is_added)
- continue;
-
- /* Fixup NUMA node as it may not be setup yet by the generic
- * code and is needed by the DMA init
- */
- set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
-
- /* Hook up default DMA ops */
- set_dma_ops(&dev->dev, pci_dma_ops);
- set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
-
- /* Additional platform DMA/iommu setup */
- if (ppc_md.pci_dma_dev_setup)
- ppc_md.pci_dma_dev_setup(dev);
-
- /* Read default IRQs and fixup if necessary */
- pci_read_irq_line(dev);
- if (ppc_md.pci_irq_fixup)
- ppc_md.pci_irq_fixup(dev);
- }
-}
-
void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
@@ -1147,19 +1113,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
/* Now fixup the bus bus */
pcibios_setup_bus_self(bus);
-
- /* Now fixup devices on that bus */
- pcibios_setup_bus_devices(bus);
}
EXPORT_SYMBOL(pcibios_fixup_bus);
-void __devinit pci_fixup_cardbus(struct pci_bus *bus)
-{
- /* Now fixup devices on that bus */
- pcibios_setup_bus_devices(bus);
-}
-
-
static int skip_isa_ioresource_align(struct pci_dev *dev)
{
if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN) &&
@@ -1763,6 +1719,49 @@ void __devinit pcibios_scan_phb(struct pci_controller
*hose)
}
}
+static int pcibios_device_change_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pci_dev *dev = to_pci_dev(data);
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ /* Setup OF node pointer in the device */
+ dev->dev.of_node = pci_device_to_OF_node(dev);
+
+ /* Fixup NUMA node as it may not be setup yet by the generic
+ * code and is needed by the DMA init
+ */
+ set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+ /* Hook up default DMA ops */
+ set_dma_ops(&dev->dev, pci_dma_ops);
+ set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
+
+ /* Additional platform DMA/iommu setup */
+ if (ppc_md.pci_dma_dev_setup)
+ ppc_md.pci_dma_dev_setup(dev);
+
+ /* Read default IRQs and fixup if necessary */
+ pci_read_irq_line(dev);
+ if (ppc_md.pci_irq_fixup)
+ ppc_md.pci_irq_fixup(dev);
+
+ break;
+ }
+
+ return 0;
+}
+
+static struct notifier_block device_nb = {
+ .notifier_call = pcibios_device_change_notifier,
+};
+
+void __devinit pcibios_setup_bus_notifier(void)
+{
+ bus_register_notifier(&pci_bus_type, &device_nb);
+}
+
static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
{
int i, class = dev->class >> 8;
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index fdd1a3d..5a30cec 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -231,6 +231,8 @@ static int __init pcibios_init(void)
printk(KERN_INFO "PCI: Probing PCI hardware\n");
+ pcibios_setup_bus_notifier();
+
if (pci_has_flag(PCI_REASSIGN_ALL_BUS))
pci_assign_all_buses = 1;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 3318d39..d66c9dc 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -50,6 +50,8 @@ static int __init pcibios_init(void)
printk(KERN_INFO "PCI: Probing PCI hardware\n");
+ pcibios_setup_bus_notifier();
+
/* For now, override phys_mem_access_prot. If we need it,g
* later, we may move that initialization to each ppc_md
*/
diff --git a/arch/powerpc/kernel/pci_of_scan.c
b/arch/powerpc/kernel/pci_of_scan.c
index b37d0b5..1e29642 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -329,7 +329,6 @@ static void __devinit __of_scan_bus(struct device_node
*node,
*/
if (!rescan_existing)
pcibios_setup_bus_self(bus);
- pcibios_setup_bus_devices(bus);
/* Now scan child busses */
list_for_each_entry(dev, &bus->devices, bus_list) {
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c
b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 55d4ec1..fdb8b64 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -120,7 +120,6 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
if (!num)
return;
- pcibios_setup_bus_devices(bus);
max = bus->secondary;
for (pass=0; pass < 2; pass++)
list_for_each_entry(dev, &bus->devices, bus_list) {
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index af295bb..f363b5d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3698,11 +3698,6 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct
pci_dev *dev)
return 1;
}
-void __weak pci_fixup_cardbus(struct pci_bus *bus)
-{
-}
-EXPORT_SYMBOL(pci_fixup_cardbus);
-
static int __init pci_setup(char *str)
{
while (str) {
diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index 9a58862..8f7baa6 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -71,7 +71,6 @@ int __ref cb_alloc(struct pcmcia_socket *s)
unsigned int max, pass;
s->functions = pci_scan_slot(bus, PCI_DEVFN(0, 0));
- pci_fixup_cardbus(bus);
max = bus->secondary;
for (pass = 0; pass < 2; pass++)
@@ -85,7 +84,6 @@ int __ref cb_alloc(struct pcmcia_socket *s)
*/
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
- cardbus_config_irq_and_cls(bus, s->pci_irq);
/* socket specific tune function */
if (s->tune_bridge)
@@ -93,6 +91,7 @@ int __ref cb_alloc(struct pcmcia_socket *s)
pci_enable_bridges(bus);
pci_bus_add_devices(bus);
+ cardbus_config_irq_and_cls(bus, s->pci_irq);
return 0;
}
diff --git a/include/linux/pci.h b/include/linux/pci.h
index a16b1df..56f50fd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -651,9 +651,6 @@ resource_size_t pcibios_align_resource(void *, const struct
resource *,
resource_size_t);
void pcibios_update_irq(struct pci_dev *, int irq);
-/* Weak but can be overriden by arch */
-void pci_fixup_cardbus(struct pci_bus *);
-
/* Generic PCI functions used internally */
void pcibios_scan_specific_bus(int busn);
--
1.7.3.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
