Hi
I came across the following issue while testing Kdump on an SMP
board(Currituck) running a non-SMP kernel. Even though the kernel is UP,
the device-tree has the nodes for second CPU and the related details.
The kexec tool adds the spin table area as a reserved section in the
device tree for the dump capture kernel. This value is read from the
'cpu-release-addr'.
But now, if the spin table is not located within the 'Reserved region'
for the crash kernel, the dump capture kernel would fail to boot,
hitting a BUG in mm/bootmem.c as in [1].
This is because we try to reserve a region which is not available to the
kernel.
So I am wondering how is this handled really on an SMP board (Fsl_bookE).
There are two possible solutions :
1) Do not reserve the regions for the spin-table, as we will use
only the crashing CPU in the second kernel(maxcpus=1).
2) Add the spin-table region to the available memory regions passed
to the kernel by kexec-tools.
I have tested (1) and it works fine for me. Yet to test (2).
Thoughts ?
Thanks
Suzuki
[1] Kernel Bug
----------------
Linux version 3.3.0-rc5 (r...@suzukikp.in.ibm.com) (gcc version 4.3.4
[gcc-4_3-branch revision 152973] (GCC) ) #12 Tue May 22 18:03:01 IST2
Found legacy serial port 0 for /plb/opb/serial@10000000
mem=20010000000, taddr=20010000000, irq=0, clk=1851851, speed=115200
------------[ cut here ]------------
kernel BUG at mm/bootmem.c:351!
Vector: 700 (Program Check) at [c8a61e90]
pc: c847f91c: mark_bootmem+0xa0/0x14c
lr: c8472670: do_init_bootmem+0x1ac/0x218
sp: c8a61f40
msr: 21000
current = 0xc8a4a500
pid = 0, comm = swapper
kernel BUG at mm/bootmem.c:351!
enter ? for help
[c8a61f70] c8472670 do_init_bootmem+0x1ac/0x218
[c8a61f90] c847025c setup_arch+0x1bc/0x234
[c8a61fb0] c846b62c start_kernel+0x98/0x358
[c8a61ff0] c80000b4 _start+0xb4/0xf8
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
