This patch adds the GE_FPGA configuration option. This is being carried
out as ground work to allow the PIC and GPIO drivers to be move from the
powerpc 86xx platform directory to more general locations to allow them to
be used on non-86xx boards and to reduce churn when further boards using
these drivers are added.
Signed-off-by: Martyn Welch <martyn.we...@ge.com>
---
v3: Broken out from patch moving PIC and GPIO drivers
arch/powerpc/platforms/86xx/Kconfig | 7 +++++++
arch/powerpc/platforms/86xx/Makefile | 7 ++++---
drivers/watchdog/Kconfig | 2 +-
3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/Kconfig
b/arch/powerpc/platforms/86xx/Kconfig
index 8d6599d..abe2c4f 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -39,6 +39,7 @@ config GEF_PPC9A
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select GE_FPGA
help
This option enables support for the GE PPC9A.
@@ -48,6 +49,7 @@ config GEF_SBC310
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select GE_FPGA
help
This option enables support for the GE SBC310.
@@ -57,10 +59,15 @@ config GEF_SBC610
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select GE_FPGA
select HAS_RAPIDIO
help
This option enables support for the GE SBC610.
+config GE_FPGA
+ bool
+ default n
+
endif
config MPC8641
diff --git a/arch/powerpc/platforms/86xx/Makefile
b/arch/powerpc/platforms/86xx/Makefile
index 4b0d7b1..ac6a50f 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
obj-$(CONFIG_SBC8641D) += sbc8641d.o
obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o
-obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y)
-obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o gef_pic.o $(gef-gpio-y)
-obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GE_FPGA) += gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o
+obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o
+obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 877b107..2955c3f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1039,7 +1039,7 @@ config LANTIQ_WDT
config GEF_WDT
tristate "GE Watchdog Timer"
- depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
+ depends on GE_FPGA
---help---
Watchdog timer found in a number of GE single board computers.
--
1.7.0.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
