We already use pci_flags, so this just sets pci_flags directly and removes
the intermediate step of figuring out pci_probe_only, then using it to set
pci_flags.
The PCI core provides a pci_flags definition (currently __weak), so drop
the powerpc definitions in favor of that. Note that we must set the ppc64
default (PCI_PROBE_ONLY set) in the 64-bit setup_arch() before calling
the platform .setup_arch() method, which may override the default.
CC: Benjamin Herrenschmidt <b...@kernel.crashing.org>
CC: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Bjorn Helgaas <bhelg...@google.com>
---
arch/powerpc/include/asm/ppc-pci.h | 2 --
arch/powerpc/kernel/pci-common.c | 3 ---
arch/powerpc/kernel/pci_64.c | 5 -----
arch/powerpc/kernel/rtas_pci.c | 10 +++++++---
arch/powerpc/kernel/setup_64.c | 1 +
arch/powerpc/platforms/iseries/pci.c | 2 +-
arch/powerpc/platforms/maple/pci.c | 2 +-
arch/powerpc/platforms/pasemi/pci.c | 2 +-
arch/powerpc/platforms/powermac/pci.c | 2 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 5 ++---
arch/powerpc/platforms/powernv/pci.c | 4 ++--
arch/powerpc/platforms/wsp/wsp_pci.c | 2 +-
12 files changed, 17 insertions(+), 23 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc-pci.h
b/arch/powerpc/include/asm/ppc-pci.h
index 6d42297..a96d012 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -45,8 +45,6 @@ extern void init_pci_config_tokens (void);
extern unsigned long get_phb_buid (struct device_node *);
extern int rtas_setup_phb(struct pci_controller *phb);
-extern unsigned long pci_probe_only;
-
/* ---- EEH internal-use-only related routines ---- */
#ifdef CONFIG_EEH
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index cce98d7..6d03da4 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -50,9 +50,6 @@ static int global_phb_number; /* Global phb counter */
/* ISA Memory physical address */
resource_size_t isa_mem_base;
-/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */
-unsigned int pci_flags = 0;
-
static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 3318d39..75417fd 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -33,8 +33,6 @@
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
-unsigned long pci_probe_only = 1;
-
/* pci_io_base -- the base address from which io bars are offsets.
* This is the lowest I/O base address (so bar values are always positive),
* and it *must* be the start of ISA space if an ISA bus exists because
@@ -55,9 +53,6 @@ static int __init pcibios_init(void)
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
- if (pci_probe_only)
- pci_add_flags(PCI_PROBE_ONLY);
-
/* On ppc64, we always enable PCI domains and we keep domain 0
* backward compatible in /proc for video cards
*/
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 6cd8f01..140735c 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -276,7 +276,7 @@ void __init find_and_init_phbs(void)
pci_devs_phb_init();
/*
- * pci_probe_only and pci_assign_all_buses can be set via properties
+ * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
* in chosen.
*/
if (of_chosen) {
@@ -284,8 +284,12 @@ void __init find_and_init_phbs(void)
prop = of_get_property(of_chosen,
"linux,pci-probe-only", NULL);
- if (prop)
- pci_probe_only = *prop;
+ if (prop) {
+ if (*prop)
+ pci_add_flags(PCI_PROBE_ONLY);
+ else
+ pci_clear_flags(PCI_PROBE_ONLY);
+ }
#ifdef CONFIG_PPC32 /* Will be made generic soon */
prop = of_get_property(of_chosen,
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 4cb8f1e..639baa9 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -590,6 +590,7 @@ void __init setup_arch(char **cmdline_p)
conswitchp = &dummy_con;
#endif
+ pci_add_flags(PCI_PROBE_ONLY);
if (ppc_md.setup_arch)
ppc_md.setup_arch();
diff --git a/arch/powerpc/platforms/iseries/pci.c
b/arch/powerpc/platforms/iseries/pci.c
index c754128..171b2f3 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -868,7 +868,7 @@ void __init iSeries_pcibios_init(void)
/* Install IO hooks */
ppc_pci_io = iseries_pci_io;
- pci_probe_only = 1;
+ pci_add_flags(PCI_PROBE_ONLY);
/* iSeries has no IO space in the common sense, it needs to set
* the IO base to 0
diff --git a/arch/powerpc/platforms/maple/pci.c
b/arch/powerpc/platforms/maple/pci.c
index 401e3f3..465ee8f 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -620,7 +620,7 @@ void __init maple_pci_init(void)
}
/* Tell pci.c to not change any resource allocations. */
- pci_probe_only = 1;
+ pci_add_flags(PCI_PROBE_ONLY);
}
int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
diff --git a/arch/powerpc/platforms/pasemi/pci.c
b/arch/powerpc/platforms/pasemi/pci.c
index b6a0ec4..b27d886 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -231,7 +231,7 @@ void __init pas_pci_init(void)
pci_devs_phb_init();
/* Use the common resource allocation mechanism */
- pci_probe_only = 1;
+ pci_add_flags(PCI_PROBE_ONLY);
}
void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
diff --git a/arch/powerpc/platforms/powermac/pci.c
b/arch/powerpc/platforms/powermac/pci.c
index 31a7d3a..c829e58 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1060,7 +1060,7 @@ void __init pmac_pci_init(void)
/* pmac_check_ht_link(); */
/* We can allocate missing resources if any */
- pci_probe_only = 0;
+ pci_clear_flags(PCI_PROBE_ONLY);
#else /* CONFIG_PPC64 */
init_p2pbridge();
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
b/arch/powerpc/platforms/powernv/pci-ioda.c
index 5e155df..fbdd74d 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1299,15 +1299,14 @@ void __init pnv_pci_init_ioda1_phb(struct device_node
*np)
/* Setup MSI support */
pnv_pci_init_ioda_msis(phb);
- /* We set both probe_only and PCI_REASSIGN_ALL_RSRC. This is an
+ /* We set both PCI_PROBE_ONLY and PCI_REASSIGN_ALL_RSRC. This is an
* odd combination which essentially means that we skip all resource
* fixups and assignments in the generic code, and do it all
* ourselves here
*/
- pci_probe_only = 1;
ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb;
ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
- pci_add_flags(PCI_REASSIGN_ALL_RSRC);
+ pci_add_flags(PCI_PROBE_ONLY | PCI_REASSIGN_ALL_RSRC);
/* Reset IODA tables to a clean state */
rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET,
OPAL_ASSERT_RESET);
diff --git a/arch/powerpc/platforms/powernv/pci.c
b/arch/powerpc/platforms/powernv/pci.c
index f92b9ef..30abdd7 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -561,10 +561,10 @@ void __init pnv_pci_init(void)
{
struct device_node *np;
- pci_set_flags(PCI_CAN_SKIP_ISA_ALIGN);
+ pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN);
/* We do not want to just probe */
- pci_probe_only = 0;
+ pci_clear_flags(PCI_PROBE_ONLY);
/* OPAL absent, try POPAL first then RTAS detection of PHBs */
if (!firmware_has_feature(FW_FEATURE_OPAL)) {
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c
b/arch/powerpc/platforms/wsp/wsp_pci.c
index d24b3ac..c5924ce 100644
--- a/arch/powerpc/platforms/wsp/wsp_pci.c
+++ b/arch/powerpc/platforms/wsp/wsp_pci.c
@@ -682,7 +682,7 @@ static int __init wsp_setup_one_phb(struct device_node *np)
/* XXX Force re-assigning of everything for now */
pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC |
PCI_ENABLE_PROC_DOMAINS);
- pci_probe_only = 0;
+ pci_clear_flags(PCI_PROBE_ONLY);
/* Calculate how the TCE space is divided */
phb->dma32_base = 0;
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
