> -----Original Message----- > From: linuxppc-release-boun...@linux.freescale.net [mailto:linuxppc-release- > boun...@linux.freescale.net] On Behalf Of Jia Hongtao-B38951 > Sent: Thursday, February 16, 2012 8:49 PM > To: linuxppc-dev@lists.ozlabs.org > Cc: meador_i...@mentor.com; Li Yang-R58472; Jia Hongtao-B38951 > Subject: [linuxppc-release] [PATCH 1/2] powerpc: document the FSL MPIC > message register > binding > > This binding documents how the message register blocks found in some FSL MPIC > implementations > shall be represented in a device tree. > > Signed-off-by: Meador Inge <meador_i...@mentor.com> > Signed-off-by: Jia Hongtao <b38...@freescale.com> > Signed-off-by: Li Yang <le...@freescale.com> > --- > .../devicetree/bindings/powerpc/fsl/mpic-msgr.txt | 62 > ++++++++++++++++++++ > 1 files changed, 62 insertions(+), 0 deletions(-) create mode 100644 > Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt > > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt > b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt > new file mode 100644 > index 0000000..b4ae70e > --- /dev/null > +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt > @@ -0,0 +1,62 @@ > +* FSL MPIC Message Registers > + > +This binding specifies what properties must be available in the device > +tree representation of the message register blocks found in some FSL > +MPIC implementations. > + > +Required properties: > + > + - compatible: Specifies the compatibility list for the message register > + block. The type shall be <string> and the value shall be of the form > + "fsl,mpic-v<version>-msgr", where <version> is the version number of > + the MPIC containing the message registers.
The type for compatibles is a <string-list>. > + - reg: Specifies the base physical address(s) and size(s) of the > + message register block's addressable register space. The type shall be > + <prop-encoded-array>. > + > + - interrupts: Specifies a list of interrupt source and level-sense pairs. > + The type shall be <prop-encoded-array>. The length shall be equal to > + the number of registers that are available for receiving interrupts. How many interrupts are there? If more than 1, this is where you need to specify what each interrupt is for. > +Optional properties: > + > + - mpic-msgr-receive-mask: Specifies what registers in the containing > block > + are allowed to receive interrupts. The value is a bit mask where a set > + bit at bit 'n' indicates that message register 'n' can receive > interrupts. > + The type shall be <prop-encoded-array>. If not present, then all of > + the message registers in the block are available. Your example implies that this is 1 32-bit cell. If that is the case then this really should be of type '<u32>'. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
