From: Diana CRACIUN <diana.crac...@freescale.com>
The MSIIR register for each MSI bank is aliased to a different
address. The MSI node reg property was updated to contain this
address:
e.g. reg = <0x41600 0x200 0x44140 4>;
The first region contains the address and length of the MSI
register set and the second region contains the address of
the aliased MSIIR register at 0x44140.
Signed-off-by: Diana CRACIUN <diana.crac...@freescale.com>
---
.../devicetree/bindings/powerpc/fsl/msi-pic.txt | 6 ++++--
arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi | 6 +++---
2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index 5d586e1..5693877 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -6,8 +6,10 @@ Required properties:
etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
the parent type.
-- reg : should contain the address and the length of the shared message
- interrupt register set.
+- reg : It may contain one or two regions. The first region should contain
+ the address and the length of the shared message interrupt register set.
+ The second region should contain the address of aliased MSIIR register for
+ platforms that have such an alias.
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
index b9bada6..08f4227 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
@@ -53,7 +53,7 @@ timer@41100 {
msi0: msi@41600 {
compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
+ reg = <0x41600 0x200 0x44140 4>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0 0 0
@@ -68,7 +68,7 @@ msi0: msi@41600 {
msi1: msi@41800 {
compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
+ reg = <0x41800 0x200 0x45140 4>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe8 0 0 0
@@ -83,7 +83,7 @@ msi1: msi@41800 {
msi2: msi@41a00 {
compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
+ reg = <0x41a00 0x200 0x46140 4>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xf0 0 0 0
--
1.7.3.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
