On Jan 31, 2012, at 3:51 AM, Zhicheng Fan wrote: > From: Zhicheng Fan <b32...@freeescale.com> > > P1025RDB Overview > ------------------ > 1Gbyte DDR3 SDRAM > 32 Mbyte NAND flash > 16Mbyte NOR flash > 16 Mbyte SPI flash > SD connector to interface with the SD memory card > Real-time clock on I2C bus > > PCIe: > - x1 PCIe slot > - x1 mini-PCIe slot > > 10/100/1000 BaseT Ethernet ports: > - eTSEC1, RGMII: one 10/100/1000 port using AtherosTM AR8021 > - eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221 > - eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021 > > USB 2.0 port: > - Two USB2.0 Type A receptacles > - One USB2.0 signal to Mini PCIe slot > > Dual RJ45 UART ports: > - DUART interface: supports two UARTs up to 115200 bps for console display > > Signed-off-by: Zhicheng Fan <b32...@freeescale.com> > --- > arch/powerpc/boot/dts/fsl/p1025si-post.dtsi | 228 +++++++++++++++++++++ > arch/powerpc/boot/dts/fsl/p1025si-pre.dtsi | 70 +++++++ > arch/powerpc/boot/dts/p1025rdb.dts | 137 +++++++++++++ > arch/powerpc/boot/dts/p1025rdb.dtsi | 286 +++++++++++++++++++++++++++ > arch/powerpc/boot/dts/p1025rdb_36b.dts | 88 ++++++++ > 5 files changed, 809 insertions(+), 0 deletions(-) > create mode 100644 arch/powerpc/boot/dts/fsl/p1025si-post.dtsi > create mode 100644 arch/powerpc/boot/dts/fsl/p1025si-pre.dtsi > create mode 100644 arch/powerpc/boot/dts/p1025rdb.dts > create mode 100644 arch/powerpc/boot/dts/p1025rdb.dtsi > create mode 100644 arch/powerpc/boot/dts/p1025rdb_36b.dts
For the p1024 & p1025 I do NOT want to add new dts/fsl/p1025si*.dtsi files. We should use the p1020 and p1021 as they are identical. - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
