On 11/29/2011 02:36 AM, Arshad, Farrukh wrote: > I am loading the kernel from Uboot as following way > > > > Setenv bootm_low 0x10000000 > > Setenv bootm_size 0x10000000 > > Setenv bootm boot=/dev/mmcblk0p3 ro debug rootdelay=5 > > Interrupts off > > Bootm start $load1addr - $fdt1addr > > Bootm loados > > Bootm fdt > > Fdt boardsetup > > Fdt chosen > > Bootm prep > > Bootm go
You set up the device tree to reflect a core 1 boot, but I don't see where you told U-Boot to use core 1. You need to use a command like "cpu 1 release 0x10000000 - $fdt1addr 0x45504150" instead of "bootm go". Also make sure that you pass -b1 to dtc. BTW, your e-mail client appears to be inappropriately adding capitalization to pasted text. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
