i'm trying to enable marvel gigabit ethernet support but it doesn't work. Here my dmesg instead my config is attached.
root@peg2:~# dmesg :08.0: supports D1 D2 pci 0001:01:08.1: [1002:5940] type 0 class 0x000380 pci 0001:01:08.1: reg 10: [mem 0xd0000000-0xd7ffffff pref] pci 0001:01:08.1: reg 14: [mem 0xc8010000-0xc801ffff] pci 0001:01:08.1: supports D1 D2 PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff] PCI: max bus depth: 0 pci_try_num: 1 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x80000000-0xbfffffff] pci_bus 0001:01: resource 0 [io 0xffff0000-0xffffffff] pci_bus 0001:01: resource 1 [mem 0xc0000000-0xdfffffff] bio: create slab <bio-0> at 0 vgaarb: device added: PCI:0001:01:08.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0001:01:08.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Switching to clocksource timebase Switched to NOHz mode on CPU #0 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:00:0c.1: Fixing VIA IDE, force legacy mode on PCI: CLS 128 bytes, default 32 rtasd: scan rate is 0, not scanning Thermal assist unit not available highmem bounce pool size: 64 pages NTFS driver 2.1.30 [Flags: R/W]. JFS: nTxBlock = 8044, nTxLock = 64358 SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled Btrfs loaded msgmni has been set to 1499 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) radeonfb: Found Intel x86 BIOS ROM Image radeonfb: No ATY,RefCLK property ! radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=240.00 Mhz, System=166.00 MHz radeonfb: PLL min 20000 max 40000 i2c i2c-1: unable to read EDID block. i2c i2c-1: unable to read EDID block. i2c i2c-1: unable to read EDID block. i2c i2c-3: unable to read EDID block. i2c i2c-3: unable to read EDID block. i2c i2c-3: unable to read EDID block. radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 100x37 radeonfb (0001:01:08.0): ATI Radeon 5960 "Y`" Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at I/O 0x2f8 (irq = 0) is a 16550A Generic non-volatile memory driver v1.1 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x3BC parport0: PC-style at 0x3bc, irq 7 [PCSPP] parport0: Device ID was 64 bytes while device told it would be 63 bytes parport0 (addr 0): SCSI adapter, IMG VP1 parport_pc: VIA parallel port: io=0x3BC, irq=7 brd: module loaded loop: module loaded pata_via 0000:00:0c.1: version 0.3.4 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/100 cmd 0x1000 ctl 0x100c bmdma 0x1020 irq 14 ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x101c bmdma 0x1028 irq 15 Fixed MDIO Bus: probed firewire_ohci 0000:00:01.0: enabling device (0000 -> 0003) firewire_ohci: Added fw-ohci device 0000:00:01.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x11 usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:05.1: enabling device (0000 -> 0002) ehci_hcd 0000:00:05.1: EHCI Host Controller ehci_hcd 0000:00:05.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:05.1: irq 9, io mem 0x80001800 ehci_hcd 0000:00:05.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.0.4 ehci_hcd usb usb1: SerialNumber: 0000:00:05.1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 i2c /dev entries driver ata1.00: ATA-6: ST340810A, 3.39, max UDMA/100 ata1.00: 78165360 sectors, multi 0: LBA lirc_dev: IR Remote Control driver registered, major 251 atkbd serio0: keyboard reset failed on isa0060/serio0 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized ata1.00: configured for UDMA/100 IR RC5 (streamzap) protocol handler initialized IR LIRC bridge handler initialized Linux video capture interface: v2.00 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-de...@redhat.com scsi 0:0:0:0: Direct-Access ATA ST340810A 3.39 PQ: 0 ANSI: 5 usbcore: registered new interface driver usbhid sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) sd 0:0:0:0: [sda] Write Protect is off atkbd serio1: keyboard reset failed on isa0060/serio1 usbhid: USB HID core driver sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk ata2.00: ATAPI: SAMSUNG CDRW/DVD SM-352B, T807, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SM-352B T807 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 1x/52x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 REISERFS (device sda5): found reiserfs format "3.6" with standard journal REISERFS (device sda5): using ordered data mode REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda5): checking transaction log (sda5) REISERFS (device sda5): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:5. devtmpfs: mounted Freeing unused kernel memory: 220k init firewire_core: created device fw0: GUID 0011060000004b2f, S400 udevd[57]: starting version 173 uhci_hcd: USB Universal Host Controller Interface driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd 0000:00:0c.2: enabling device (0000 -> 0001) uhci_hcd 0000:00:0c.2: UHCI Host Controller uhci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 2 via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 uhci_hcd 0000:00:0c.2: irq 9, io base 0x00001040 sysfs: cannot create duplicate filename '/class/mdio_bus/0' usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:455 Modules linked in: snd_via82xx(+) snd_ac97_codec mv643xx_eth(+) via_rhine(+) i2c_viapro(+) ac97_bus ohci_hcd(+) snd_mpu401_uart uhci_hcd(+) snd_rawmidi NIP: c00fa718 LR: c00fa718 CTR: 00000000 REGS: ef271c00 TRAP: 0700 Not tainted (3.0.4) MSR: 00029032 <EE,ME,CE,IR,DR> CR: 22004428 XER: 00000000 TASK = ef294c60[94] 'modprobe' THREAD: ef270000 GPR00: c00fa718 ef271cb0 ef294c60 00000042 c0008904 00000001 00000000 00000000 GPR08: c06b6bd8 00000000 22004482 ef271c70 22004422 10024440 1000ba68 00000000 GPR16: 1000ba44 bf83e324 00000000 1000ba58 00000000 104410ec 00000a30 00000000 GPR24: c0059210 00000124 00000000 00000001 ef271cd8 ef2ba480 ffffffef ef344000 NIP [c00fa718] sysfs_add_one+0x88/0xa0 LR [c00fa718] sysfs_add_one+0x88/0xa0 Call Trace: [ef271cb0] [c00fa718] sysfs_add_one+0x88/0xa0 (unreliable) [ef271cd0] [c00faff4] sysfs_do_create_link+0x134/0x1e0 [ef271d00] [c0392cf8] device_add+0x204/0x544 [ef271d40] [c03d67e4] mdiobus_register+0xa4/0x198 [ef271d60] [f26785a4] mv643xx_eth_shared_probe+0x144/0x428 [mv643xx_eth] [ef271d80] [c039685c] platform_drv_probe+0x20/0x30 [ef271d90] [c0395578] driver_probe_device+0xe4/0x198 [ef271db0] [c039569c] __driver_attach+0x70/0x98 [ef271dd0] [c0394614] bus_for_each_dev+0x60/0x90 [ef271e00] [c03951d0] driver_attach+0x24/0x34 [ef271e10] [c0394d9c] bus_add_driver+0xbc/0x23c [ef271e30] [c0395ac8] driver_register+0xb8/0x144 [ef271e50] [c0396bb4] platform_driver_register+0x68/0x78 [ef271e60] [f2680024] mv643xx_eth_init_module+0x24/0x80 [mv643xx_eth] [ef271e80] [c000402c] do_one_initcall+0xe0/0x1c0 [ef271eb0] [c005b438] sys_init_module+0x1600/0x17f4 [ef271f40] [c0012df8] ret_from_syscall+0x0/0x38 --- Exception: c01 at 0xff62ac0 LR = 0x10003f2c Instruction dump: 807c0000 7fe4fb78 4bfff469 3c80c060 3884f131 4bf2051d 809d0010 4bf20515 7c641b78 3c60c060 3863f0fe 484650f9 <0fe00000> 7fe3fb78 4bfa8009 39610020 ---[ end trace cebed1f190337b77 ]--- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 3.0.4 uhci_hcd usb usb2: SerialNumber: 0000:00:0c.2 hub 2-0:1.0: USB hub found mii_bus 0 failed to register mv643xx_eth: probe of mv643xx_eth.0 failed with error -12 hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:05.0: OHCI Host Controller ohci_hcd 0000:00:05.0: new USB bus registered, assigned bus number 3 Unable to handle kernel paging request for data at address 0x00000000 ohci_hcd 0000:00:05.0: irq 9, io mem 0x80000000 Faulting instruction address: 0xf267b3a8 Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT CHRP Modules linked in: snd_via82xx(+) snd_ac97_codec mv643xx_eth(+) via_rhine(+) i2c_viapro(+) ac97_bus ohci_hcd(+) snd_mpu401_uart uhci_hcd(+) snd_rawmidi NIP: f267b3a8 LR: f267b3a0 CTR: c0394ff4 REGS: ef271c90 TRAP: 0300 Tainted: G W (3.0.4) MSR: 00009032 <EE,ME,IR,DR> CR: 84004448 XER: 00000000 DAR: 00000000, DSISR: 40000000 TASK = ef294c60[94] 'modprobe' THREAD: ef270000 GPR00: 00000000 ef271d40 ef294c60 00000000 eec003c0 eec00005 ef24bb3c 00000000 GPR08: ef24bb28 ef8a7600 ffffffff 00000001 44004442 10024440 1000ba68 00000000 GPR16: 1000ba44 bf83e324 00000000 1000ba58 00000000 104410ec 00000a30 00000000 GPR24: c0059210 c06b68c0 00000020 c06b68b8 fffffff4 eec00000 c06b6740 eec003c0 NIP [f267b3a8] mv643xx_eth_probe+0x98/0x604 [mv643xx_eth] LR [f267b3a0] mv643xx_eth_probe+0x90/0x604 [mv643xx_eth] Call Trace: [ef271d40] [f267b394] mv643xx_eth_probe+0x84/0x604 [mv643xx_eth] (unreliable) [ef271d80] [c039685c] platform_drv_probe+0x20/0x30 [ef271d90] [c0395578] driver_probe_device+0xe4/0x198 [ef271db0] [c039569c] __driver_attach+0x70/0x98 [ef271dd0] [c0394614] bus_for_each_dev+0x60/0x90 [ef271e00] [c03951d0] driver_attach+0x24/0x34 [ef271e10] [c0394d9c] bus_add_driver+0xbc/0x23c [ef271e30] [c0395ac8] driver_register+0xb8/0x144 [ef271e50] [c0396bb4] platform_driver_register+0x68/0x78 [ef271e60] [f2680034] mv643xx_eth_init_module+0x34/0x80 [mv643xx_eth] [ef271e80] [c000402c] do_one_initcall+0xe0/0x1c0 [ef271eb0] [c005b438] sys_init_module+0x1600/0x17f4 [ef271f40] [c0012df8] ret_from_syscall+0x0/0x38 --- Exception: c01 at 0xff62ac0 LR = 0x10003f2c Instruction dump: 7c7d1b79 41820530 3bfd03c0 3b3b0008 7fe4fb78 7f23cb78 48001101 807e0000 38630008 48001505 907d03c0 817e0004 556b502a 396b0400 7d605a14 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 3.0.4 ohci_hcd usb usb3: SerialNumber: 0000:00:05.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected vt596_smbus 0000:00:0c.4: SMBUS: Error: Host SMBus controller not enabled! - upgrade BIOS or use force=1 VIA 82xx Audio 0000:00:0c.5: enabling device (0000 -> 0001) ---[ end trace cebed1f190337b78 ]--- via-rhine 0000:00:0d.0: enabling device (0000 -> 0003) via-rhine 0000:00:0d.0: eth0: VIA Rhine II at 0x80001900, 00:0b:2f:4f:65:7b, IRQ 9 via-rhine 0000:00:0d.0: eth0: MII PHY found at address 16, status 0x786d advertising 01e1 Link 45e1 uhci_hcd 0000:00:0c.3: enabling device (0000 -> 0001) uhci_hcd 0000:00:0c.3: UHCI Host Controller uhci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:0c.3: irq 9, io base 0x00001060 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.0.4 uhci_hcd usb usb4: SerialNumber: 0000:00:0c.3 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 4-1: new low speed USB device number 2 using uhci_hcd usb 4-1: New USB device found, idVendor=062a, idProduct=0102 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: Wireless Keyboard & Mouse usb 4-1: Manufacturer: MOSART Semi. input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:0c.3/usb4/4-1/4-1:1.0/input/input0 generic-usb 0003:062A:0102.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0c.3-1/input0 input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:0c.3/usb4/4-1/4-1:1.1/input/input1 generic-usb 0003:062A:0102.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0c.3-1/input1 REISERFS (device sda6): found reiserfs format "3.6" with standard journal REISERFS (device sda6): using ordered data mode REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda6): checking transaction log (sda6) REISERFS (device sda6): Using r5 hash to sort names REISERFS (device sda7): found reiserfs format "3.6" with standard journal REISERFS (device sda7): using ordered data mode REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda7): checking transaction log (sda7) REISERFS (device sda7): Using r5 hash to sort names Adding 499996k swap on /dev/sda1. Priority:-1 extents:1 across:499996k imm: Version 2.05 (for Linux 2.4.0) imm: Found device at ID 6, Attempting to use SPP imm: Communication established at 0x3bc with ID 6 using SPP scsi2 : Iomega VPI2 (imm) interface scsi 2:0:6:0: Direct-Access IOMEGA ZIP 100 PLUS J.66 PQ: 0 ANSI: 2 sd 2:0:6:0: Attached scsi generic sg2 type 0 sd 2:0:6:0: [sdb] Attached SCSI removable disk via-rhine 0000:00:0d.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ata1.00: configured for UDMA/100 ata1: EH complete eth0: no IPv6 routers present -- Power Mac G4 AGP 450MHz - CRUX PPC (32bit)
config.gz
Description: GNU Zip compressed data
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
