This patch was obsolete, please see
http://linux.freescale.net/patchwork/patch/12224/ posted on Sep 9.
> -----Original Message-----
> From: Tabi Timur-B04825
> Sent: Thursday, September 15, 2011 5:18 AM
> To: Kumar Gala
> Cc: linuxppc-...@ozlabs.org; Liu Shengzhou-B36685
> Subject: Re: [PATCH 3/4] powerpc/p3060qds: Add support for P3060QDS board
>
> On Thu, Sep 1, 2011 at 2:26 PM, Kumar Gala <ga...@kernel.crashing.org>
> wrote:
>
> > + localbus@ffe124000 {
> > + reg = <0xf 0xfe124000 0 0x1000>;
> > + ranges = <0 0 0xf 0xe8000000 0x08000000>;
> > +
> > + flash@0,0 {
> > + compatible = "cfi-flash";
> > + reg = <0 0 0x08000000>;
> > + bank-width = <2>;
> > + device-width = <2>;
> > + };
> > +
> > + nand@2,0 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + compatible = "fsl,elbc-fcm-nand";
> > + reg = <0x2 0x0 0x40000>;
>
> The 'ranges' property is missing a line for the NAND device. You need
> something like this:
>
> ranges = <0 0 0xf 0xe8000000 0x08000000
> 2 0 0xf 0xffa00000 0x00040000>;
>
> I don't know if these are the right numbers, but the "2" line is missing.
>
> --
> Timur Tabi
> Linux kernel developer at Freescale
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
